Arduino Uno clone to wall-mount into GIRA Standard 55 frames. A Siemens KNX 5WG1117 bus coupler pcb can be mounted on the backside. There is also a temperature sensor DS18B20 at the front. Needs an ATMega368 chip with Arduino bootloader.
NOTICE: All brands mentioned are for explanation purposes only. This is NOT an official GIRA or Siemens product and just a pure DIY project.
This is just a DIY board, so there is no official KNX stack to configure via the ETS software.
| Item | Part | Link |
|---|---|---|
| KNX BCU | SIEMENS 5WG1117-2AB12 | https://www.voltus.de/?cl=details&anid=6d587e3f46216269029d510de0d89711 |
You can find all the open data here as a KiCad project. You can find all the necessary dependencies such as footprints or libraries in the folder KiCad Symbols & Footprints.
The Gerber files for the production of the board can be found here under releases.
The MIT License (MIT)
Copyright (c) 2019 André Husken hello@arduino-smarthome.de
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.