ArminJo/micronucleus-firmware

Issues

• Firmware version unchanged after upgrade

  #33 opened 4 months ago by sambrightman
  0

• [BUG] Device search time-out after upgrading Attiny85 with recommended settings

  #24 opened a year ago by ItsIgnacioPortal
  2

• [BUG] can't upload on Linux

  #29 opened a year ago by g1ra
  7

• Warnings when verifying sketch Mouse.ino

  #32 opened a year ago by miXza81
  1

• DigiSpark doesn't respond within new environment[BUG]

  #23 opened a year ago by Palmstroemen
  0

• device search times out and platformio

  #26 opened a year ago by tcurdt
  1

• Entry on reset - cannot reprogram the board

  #27 opened a year ago by pielgrzym
  2

• A Ti85 with 1.11 where I can't flash 2.6 or charge program

  #30 opened a year ago by Barabba11
  2

• programmer type jtagice3_updi not found

  #28 opened a year ago by g1ra
  6

• Unable to upgrade to new Digistump board version

  #21 opened a year ago by Erik84750
  1

• USB Device Not Recognised

  #31 opened 2 years ago by Sod-Almighty
  0

• [ENHANCEMENT] RESET pin defined as output (original digispark?)

  #22 opened 3 years ago by gitterman
  1

• [Question/Feature request] Bootloader clock speed with sub 3.3V supply?

  #20 opened 3 years ago by fijam
  1

• avrdude: verification error, first mismatch at byte 0x3a00

  #18 opened 3 years ago by occam25
  1

• Error compilin a new configuration t85

  #19 opened 4 years ago by freskpe
  6

• USB_INT_VECTOR bug

  #11 opened 4 years ago by nerdralph
  5

• Digispark not recognized on Linux machine, but only at boot.

  #17 opened 4 years ago by dentex
  1

• Avoid waiting for USB if D- is not pulled up

  #13 opened 4 years ago by Ircama
  7

• Revise utility to write ATtiny85 fuses to 8MHz internal clock

  #15 opened 4 years ago by Ircama
  1

• START_WITHOUT_PULLUP should not be mentioned for t85_entry_on_power_on_fast_exit_on_no_USB

  #12 opened 4 years ago by Ircama
  1

• drop strings to save 28 bytes

  #10 opened 4 years ago by nerdralph
  6

• bootloader.h not generated with default recipe

  #7 opened 4 years ago by nerdralph
  0

• Compile error

  #5 opened 4 years ago by dantavares
  2

• fast_exit_on_no_USB does not seem to work

  #4 opened 5 years ago by psitech
  1

• Unknown USB Device (Device Descriptor Request Failed) when running sketch without USB communication

  #2 opened 5 years ago by psitech
  25

• your fork

  #1 opened 5 years ago by cpldcpu
  4

• firmware upgrade fails with checksum errors

  #3 opened 5 years ago by edharman
  1