Description
This filter produces a mask showing areas that are combed.
The thresholds work as following: after calculating the combing value, if one is below thY1, the pixel is set to 0, if above thY2, it is set to 255, and if inbetween, it is set to the combing value divided by 256.
This is the same filter as the one from MaskTools-v1.5.8 with few changes:
- chroma could be filtered;
- Y/YUV(A) 8..32-bit clips are accepted;
- support for v8 interface;
- removed MMX asm code;
- registered as MT_NICE_FILTER.
Requirements:
-
AviSynth 2.60 / AviSynth+ 3.4 or later
-
Microsoft VisualC++ Redistributable Package 2022 (can be downloaded from here)
Usage:
CombMask(clip, int "thY1", int "thY2", int "y", int "u", int "v", bool "usemmx", int "opt")
Parameters:
-
clip
A clip to process. It must be in YUV planar format. -
thY1
Pixels below thY1 are set to 0.
Must be between 0 and 255 and must be <= thY2.
Default: 30. -
thY2
Pixels above thY2 are set to 255.
Must be between 0 and 255 and must be >= thY1.
Default: 30. -
y, u , v
Select which planes to process.
Must be between 1 and 3.
1: No process the plane.
2: Copy the plane.
3: Process the plane.
Default: y = 3, u = 1, v = 1. -
usemmx
It's a dummy parameter for backward compatibility.
Default: True. -
opt Sets which cpu optimizations to use.
-1: Auto-detect.
0: Use C++ code.
1: Use SSE2 code.
2: Use AVX2 code.
3: Use AVX512 code.
Default: -1.
Building:
-
Windows
Use solution files. -
Linux
Requirements: - Git - C++17 compiler - CMake >= 3.16git clone https://github.com/Asd-g/MTCombMask && \ cd MTCombMask && \ mkdir build && \ cd build && \ cmake .. && \ make -j$(nproc) && \ sudo make install