tab744

Files to drive or repair TAB744 INM7102AVD M7100AVD RTL8188ETV 8188EU GC0329 sun8iw5p1 astar m7100nobt tablets.

First try cat INM71* | unxz > inofficial-stock.img and flash firmware using LiveSuit.
If unsuccessful, other files in repo could help to debug and cook something that works4u (tm).

checksums for firmware

# md5sum
bce0f8bebb7c52377b554062373214a1  INM7102AVD_M7100AVD_RTL8188ETV_8188EU_GC0329_sun8iw5p1_astar_m7100nobt_20140917.img.xz
6c91e974ca4681e6f61798dce5f93f06  INM7102AVD_M7100AVD_RTL8188ETV_8188EU_GC0329_sun8iw5p1_astar_m7100nobt_20140917.img
# sha256sum
5ae64153b7cc5ce0ef84871df5c2df70cc4a8c455631ff04e67b428475a47fb3  INM7102AVD_M7100AVD_RTL8188ETV_8188EU_GC0329_sun8iw5p1_astar_m7100nobt_20140917.img.xz
83c6331a2105d93dbc00dec01d9245c8e09bd1e63625c1294eac3106611c1aa3  INM7102AVD_M7100AVD_RTL8188ETV_8188EU_GC0329_sun8iw5p1_astar_m7100nobt_20140917.img

modifications made (.orig files are included in img)

The firmware has been created by dumping NAND partitions in FEL/FES mode using FELix from a fresh TAB744. The firmware obtained doing this uses the device code INM7102AVD and dates September 17, 2014. Except for the modifications discussed below the image is identical with that dump.

--- ramdisk/default.prop.orig
+++ ramdisk/default.prop
@@ -1,7 +1,8 @@
 #
 # ADDITIONAL_DEFAULT_PROPERTIES
 #
-ro.secure=1
+ro.adb.secure=0
+ro.secure=0
 ro.allow.mock.location=0
-ro.debuggable=0
-persist.sys.usb.config=none
+ro.debuggable=1
+persist.sys.usb.config=adb

--- system/build.prop.orig
+++ system/build.prop
@@ -69,7 +69,7 @@
 dalvik.vm.heapmaxfree=8m
 ro.sw.embeded.telephony=false
 persist.sys.timezone=Europe/Amsterdam
-persist.sys.usb.config=mass_storage
+persist.sys.usb.config=mass_storage,adb
 ro.udisk.lable=TAB744
 ro.font.scale=1.0
 ro.hwa.force=false
@@ -79,7 +79,8 @@
 debug.hwui.render_dirty_regions=false
 ro.sys.mutedrm=true
 ro.yifang.airplane=1
-ro.adb.secure=1
+ro.adb.secure=0
+ro.secure=0
 ro.sf.lcd_density=160
 ro.setupwizard.mode=OPTIONAL
 ro.com.google.gmsversion=4.4_r3

Files unobtainable by dumping, but necessary to build a proper firmware image, have been taken from m7100avd image available on pan.baidu.com. These files are: arisc.fex aultls32.fex aultools.fex cardscript.fex cardtool.fex usbtool.fex diskfs.fex split_xxxx.fex boot0_nand.fex boot0_sdcard.fex fes1.fex u-boot.fex

u-boot.fex, version string U-Boot 2011.09-rc1-00098-g4239ee7 (May 30 2014 - 08:57:03), was originally taken from M7100AVD A33 m7100nobt 20140603 firmware shared on pan.baidu.com (M7100AVD A33 wifi+bt 20140604 has the same u-boot version) and updated using mod_update/update_uboot u-boot.fex inm7102avd_dumped_script.bin; it is identical
- with the one inside INM7102AVD_M7100AVD_RTL8188ETV_8188EU_GC0329_sun8iw5p1_astar_m7100nobt_20140917.img
- with u-boot.fex.from_fwimg_m7100avd_20140604_but_with_inm7102avd_script.bin
trying to use extracts from a live and running inm7102avd device's ddr ram in FES mode did not result in a flashable firmware image
- since they have a slightly different version string, U-Boot 2011.09-rc1-00000-g4097eae-dirty (Sep 17 2014 - 13:35:40), these are in this repo for reference and experimentation
- note that both copies are not identical, presumably because uboot code is self-modifying when run
- uboot's magic strings were not found in NAND, FELix even turns off NAND before flashing uboot
- if you know where that copy lives on TAB744 (SPI??) it'd be best to read out and use this cold copy (that is, if you really care to very closely build/recover the factory state)
M7100AVD A33 m7100nobt sdkv1.0rc7 20140617 on pan.baidu.com might also be worth a look, version stringed U-Boot 2011.09-rc1-00009-g9b33a0b-dirty (Jun 06 2014 - 10:17:00)
- if you experience problems with the first, try unpacking the fw img,
- exchange u-boot.fex with u-boot.fex.from_fwimg_m7100avd_20140617_but_with_inm7102avd_script.bin,
- repack and reflash (untested!)
all u-boot.fex versions of this repo were updated with the same script.bin, from and for TAB744, dating 20140917

modification not inside img, but useful

use imgrepacker, umkbootimg, unpack_ramdisk to include
it lets non-root users use dmesg

--- ramdisk/init.rc.orig
+++ ramdisk/init.rc
@@ -102,7 +102,7 @@
     write /proc/sys/kernel/sched_child_runs_first 0
     write /proc/sys/kernel/randomize_va_space 2
     write /proc/sys/kernel/kptr_restrict 2
-    write /proc/sys/kernel/dmesg_restrict 1
+    write /proc/sys/kernel/dmesg_restrict 0
        write  /proc/sys/vm/legacy_va_layout 1
     write /proc/sys/vm/mmap_min_addr 32768
     write /proc/sys/net/ipv4/ping_group_range "0 2147483647"

log of successful livesuit flash

--------------Init Called------------------
workDir /home/user/sunxi-livesuit/x86-64/LiveSuit
ImgLenHigh      0
ImgLenLow       673796096
Mode    8
hWnd    0
imgFilePath     /home/user/INM7102AVD_M7100AVD_RTL8188ETV_8188EU_GC0329_sun8iw5p1_astar_m7100nobt_20140917.img
[TL_MSG]:Mode = 8, ImgLenHigh=0, ImgLenLow = 28295000, imgFilePath = /home/user/INM7102AVD_M7100AVD_RTL8188ETV_8188EU_GC0329_sun8iw5p1_astar_m7100nobt_20140917.img

IMAGEWTY
ItemTableSize = 1048576
[TL_MSG]:Tools Open Img

---fun end---
--------------entry-fel2fes Called-----------
felDevName      /dev/aw_efex0
[TL_MSG]:Hi, I'm fel, dev=/dev/aw_efex0

[TL_MSG]:To down and Run fes1-1

[TL_MSG]:fes1 down addr = 0x2000, retAddr =0x7210

[TL_MSG]:To clear fes aide log

Dev Plugin The Device Path is: /dev/aw_efex0
Too Many Devices plugin...
[TL_FEX]:fel UP addr=0x7210, len=136

[TL_MSG]:SYS_PARA_LOG read = 0x4d415244

[TL_MSG]:dram paras[0]: 0x228

[TL_MSG]:dram paras[1]: 0x3

[TL_MSG]:dram paras[2]: 0x3bbb

[TL_MSG]:dram paras[3]: 0x1

[TL_MSG]:dram paras[4]: 0x10f20600

[TL_MSG]:dram paras[5]: 0x1000

[TL_MSG]:dram paras[6]: 0x1c70

[TL_MSG]:dram paras[7]: 0x40

[TL_MSG]:dram paras[8]: 0x18

[TL_MSG]:dram paras[9]: 0x0

[TL_MSG]:dram paras[10]: 0x47214f

[TL_MSG]:dram paras[11]: 0x1c2294b

[TL_MSG]:dram paras[12]: 0x61043

[TL_MSG]:dram paras[13]: 0x0

[TL_MSG]:dram paras[14]: 0x0

[TL_MSG]:dram paras[15]: 0x0

[TL_MSG]:dram paras[16]: 0x0

[TL_MSG]:dram paras[17]: 0x0

[TL_MSG]:dram paras[18]: 0x0

[TL_MSG]:dram paras[19]: 0x0

[TL_MSG]:dram paras[20]: 0x0

[TL_MSG]:dram paras[21]: 0x0

[TL_MSG]:dram paras[22]: 0xa8

[TL_MSG]:dram paras[23]: 0x40901

[TL_MSG]:dram paras[24]: 0x0

[TL_MSG]:dram paras[25]: 0x0

[TL_MSG]:dram paras[26]: 0x0

[TL_MSG]:dram paras[27]: 0x0

[TL_MSG]:dram paras[28]: 0x0

[TL_MSG]:dram paras[29]: 0x0

[TL_MSG]:dram paras[30]: 0x0

[TL_MSG]:dram paras[31]: 0x0

[TL_MSG]:To down and Run uboot

[TL_MSG]:u-boot down addr = 0x4a000000

[TL_MSG]:workmode = 0x10

---fun end---
Fel Thread Finished!
Dev Plugout The Device Path is: /dev/aw_efex0
Dev Plugout The Device Path is: /dev/aw_efex0
Dev Plugout The Device Path is: /dev/aw_efex0
Dev Plugin The Device Path is: /dev/aw_efex0
--------------entry fes_thread Called---------
portId  0
fesDevName      /dev/aw_efex0
hubId   0
DeviceId        1
[TL_MSG]:enter FES--/dev/aw_efex0

[TL_MSG]:Verify: media crc = 0

[TL_MSG]:save item to mem :(12345678,1234567890___MBR) realLen(65536)

./buffer.cpp, pBuffer = 0x7f9bec011604, nLen = 16380, crc32 = 112357176[TL_MSG]:name = bootloader, keydata = 0

[TL_MSG]:name = env, keydata = 0

[TL_MSG]:name = boot, keydata = 0

[TL_MSG]:name = system, keydata = 0

[TL_MSG]:name = data, keydata = 0

[TL_MSG]:name = misc, keydata = 0

[TL_MSG]:name = recovery, keydata = 0

[TL_MSG]:name = cache, keydata = 0

[TL_MSG]:name = metadata, keydata = 0

[TL_MSG]:name = private, keydata = 0

[TL_MSG]:name = UDISK, keydata = 0

[TL_MSG]:name = , keydata = 0

[TL_MSG]:Verify: media crc = 0

[TL_MSG]:down mbr success!!!

[TL_MSG]:dl file :save item to mem :(12345678,1234567890DLINFO) realLen(16384)

./buffer.cpp, pBuffer = 0x7f9bec218b54, nLen = 16380, crc32 = 256739088[TL_MSG]:------------dlmap dump--------------

[TL_MSG]:crc32     = 0xf4d8710

[TL_MSG]:version   = 0x200

[TL_MSG]:magic     = softw411

[TL_MSG]:part_cnt  = 6

[TL_MSG]:flash size is : 14761984 Sectors

[TL_MSG]:name = bootloader addrhi=0x0 addrlo = 0x8000  lenhi = 0x0 lenlo = 0x10000  file = BOOTLOADER_FEX00, en=0,vf=1

[TL_MSG]:need verify:1,VBOOTLOADER_FEX0

[TL_FEX]:8000, 615c00

[TL_MSG]:Verify:start = 8000 ,size = 615c00 ,pc_crc = d6b3738b, media crc = d6b3738b

[TL_MSG]:name = env addrhi=0x0 addrlo = 0x18000  lenhi = 0x0 lenlo = 0x8000  file = ENV_FEX000000000, en=0,vf=1

[TL_MSG]:need verify:1,VENV_FEX00000000

[TL_FEX]:18000, 20000

[TL_MSG]:Verify:start = 18000 ,size = 20000 ,pc_crc = 9b444057, media crc = 9b444057

[TL_MSG]:name = boot addrhi=0x0 addrlo = 0x20000  lenhi = 0x0 lenlo = 0x8000  file = BOOT_FEX00000000, en=0,vf=1

[TL_MSG]:need verify:1,VBOOT_FEX0000000

[TL_FEX]:20000, aef000

[TL_MSG]:Verify:start = 20000 ,size = aef000 ,pc_crc = c82fb952, media crc = c82fb952

[TL_MSG]:name = system addrhi=0x0 addrlo = 0x28000  lenhi = 0x0 lenlo = 0x180000  file = SYSTEM_FEX000000, en=0,vf=1

[TL_MSG]:find a sparse format part,SYSTEM_FEX000000

[TL_MSG]:item size :610 M

[TL_MSG]:magic = ed26ff3a

[TL_MSG]:blk_size = 1000

[TL_MSG]:total_chunk = 15

[TL_MSG]:tlBufImg size = 200000

Fes Device Plugin before Timeout!
Kill Timer!
[TL_MSG]:handled chunk = 15 total_chunk = 15

[TL_MSG]:name = recovery addrhi=0x0 addrlo = 0x3b0000  lenhi = 0x0 lenlo = 0x10000  file = RECOVERY_FEX0000, en=0,vf=1

[TL_MSG]:need verify:1,VRECOVERY_FEX000

[TL_FEX]:3b0000, db9000

[TL_MSG]:Verify:start = 3b0000 ,size = db9000 ,pc_crc = e19489d0, media crc = e19489d0

[TL_MSG]:name = UDISK addrhi=0x0 addrlo = 0x4d0000  lenhi = 0x0 lenlo = 0x0  file = DISKFS_FEX000000, en=0,vf=0

[TL_MSG]:work mode update ,udisk part ignore !!!!

[TL_MSG]:save item to mem :(12345678,UBOOT_0000000000) realLen(737280)

[TL_MSG]:Verify: media crc = 0

[TL_MSG]:down uboot success!!!

[TL_MSG]:storge type is 0 (0:nand 1-2:card 3:spinor)

[TL_MSG]:save item to mem :(BOOT    ,BOOT0_0000000000) realLen(32768)

[TL_MSG]:Verify: media crc = 0

[TL_MSG]:down boot0 success!!!

QObject::startTimer: QTimer can only be used with threads started with QThread
QObject::startTimer: QTimer can only be used with threads started with QThread
Dev Plugout The Device Path is: /dev/aw_efex0
[TL_MSG]:---fun end-----

---------------Exit Called-----------------
Closing image now! 

Clos image OK! 

[TL_MSG]:Tools Close Img ...

---fun end---
L302, Finished to call Tools.entry_fes_thread.
Dev Plugout The Device Path is: /dev/aw_efex0
Dev Plugout The Device Path is: /dev/aw_efex0

Asif10501050/sunxi-tabletproject

tab744

checksums for firmware

modifications made (.orig files are included in img)

modification not inside img, but useful

log of successful livesuit flash