Aus3D/RUMBA32

Issues

• Rumba32 board V1.00 not showing up in device manager

  #53 opened 5 months ago by tonytam2
  0

• RUMBA32 Aus3D V1.0 Not appearing under devices in boot mode

  #52 opened a year ago by alanamer
  2

• How to connect MAX6675

  #51 opened a year ago by HanzDieter
  0

• Rumba32 + MKS TFT32_L V4.0 + marlin 2.0

  #50 opened 2 years ago by samerjawadi
  0

• Unable to enter Debugging mode in Rumba32 with (Platformio + STlink-v3 + Marlin 2.0)

  #48 opened 3 years ago by amithbg
  1

• Stepper Drivers not working

  #49 opened 3 years ago by amithbg
  1

• How to connect tft display

  #47 opened 4 years ago by coolcheat
  1

• [FAQ] SPI Stepper Driver Defect

  #23 opened 4 years ago by chrissbarr
  1

• Board availability

  #43 opened 4 years ago by CryoRig
  3

• Sensorless homing fails when Bltouch is connected

  #46 opened 4 years ago by McPrince96
  2

• Ist it possible to connect an In-Circuit-Debugger?

  #44 opened 4 years ago by JoeScotty
  3

• RUMBA32 Cartesian profile for Repetier dev2 in SampleSystems

  #45 opened 4 years ago by nuhwandah
  0

• heater errors

  #40 opened 4 years ago by phongshader
  2

• graphic error on RUMBA32_v1_1A_Graphic.png

  #42 opened 4 years ago by ProjectPatatoe
  0

• Where to connect AD595 thermocouple pcb???

  #41 opened 4 years ago by PD5DJ
  3

• Can't connect an MKS Rumba32 board via USB

  #38 opened 4 years ago by Bernouillle
  5

• Y-stepper problems when using Marlin

  #39 opened 4 years ago by sverd
  0

• TMC220x UART on a version 1.0 board with some modifications?

  #35 opened 4 years ago by sverd
  4

• build failed with Arduino

  #36 opened 4 years ago by 19504643
  2

• BL Touch

  #20 opened 5 years ago by danielbors72
  3

• Where Rumba32 is manufactured

  #15 opened 5 years ago by MagoKimbra
  4

• PlatformIO compilation documentation possibly out of date

  #37 opened 4 years ago
  0

• Entering DFU mode problem

  #34 opened 4 years ago by JoeScotty
  2

• TMC220x on-board UART compability

  #13 opened 5 years ago by Blaster1920
  3

• MKS TFT32_L V4.0 compatibility

  #18 opened 4 years ago by rubenoosterwijk
  2

• EEPROM I2C

  #12 opened 4 years ago by MagoKimbra
  23

• PWM for Bltouch and LEDs on AUX pins?

  #8 opened 4 years ago by wesk-ms
  10

• Paypal donation link

  #30 opened 4 years ago by leseaw
  1

• RUMBA32_v1_1B_Schematic.png is V1_1A

  #33 opened 4 years ago by leseaw
  1

• Instructions for RUMBA32 Marlin compile are obsolete

  #22 opened 4 years ago by capibara1
  4

• platformIO setup for Marlin

  #11 opened 4 years ago by wap32
  6

• Exp3 pinout

  #14 opened 4 years ago by MagoKimbra
  6

• Fan PWM Troubleshooting / Timer Investigation

  #26 opened 4 years ago by chrissbarr
  2

• Connection fails with Octoprint

  #21 opened 4 years ago by McPrince96
  19

• dfu mode device not recognized

  #28 opened 4 years ago by phongshader
  4

• jumpers to set for DRV8825 drivers

  #25 opened 4 years ago by phongshader
  2

• 12v pwr select

  #27 opened 4 years ago by phongshader
  5

• Board does not run with Marlin 2.0 PlatformIO compile

  #24 opened 4 years ago by capibara1
  9

• Stepper sockets in Rev E still defect

  #17 opened 4 years ago by repetier
  3

• USB Power

  #19 opened 4 years ago by CGuasco
  1

• Flash without button press

  #16 opened 5 years ago by lorenzing
  3

• BoM and Parts D3 D4 D5 D15 component is SS24FL diode

  #10 opened 5 years ago by leseaw
  2

• Error in BoM

  #9 opened 5 years ago by leseaw
  7

• Replace MOSFET driver

  #6 opened 6 years ago by chrissbarr
  1

• Add button for BOOT0

  #7 opened 6 years ago by chrissbarr
  1

• 5V Power Supply Problems

  #1 opened 6 years ago by chrissbarr
  2

• MOSFET Driver Silkscreen Text

  #2 opened 6 years ago by chrissbarr
  1

• Inconsistent Stepper Driver Logic Voltage

  #3 opened 6 years ago by chrissbarr
  1

• Stepper Jumper Labels

  #4 opened 6 years ago by chrissbarr
  1

• Pin Mapping Problems

  #5 opened 6 years ago by chrissbarr
  1