/CubeSat-PCBSat-Command-and-Communication

This software is being written to allow for a CubeSat to relay commands from a ground station to a swarm of femtosatellites.

Primary LanguageC

CubeSat-PCBSat-Command-and-Communication

  • This software is being written to allow for a CubeSat to relay commands from a ground station to a swarm of femtosatellites.
  • The software for this project was written by adapting code examples written by TI and made available on the SimpleLink platform.
  • This code enables a CubeSat to be able to relay commands from a ground station to a femtosatellite, as well as relaying data from the femtosatellite to the ground station.

Hardware

The targeted hardware platform for this code is the CC1310 SoC by TI. The CC1310 Launchpad is the hardware development kit manufactured by TI. This code was tested on these HDKs. Further advice on programming a custom design with a CC1310 SoC should be sought through TI's various resources. All information and resources relating to the CC1310 can be found on https://www.ti.com/product/CC1310/technicaldocuments.

User Guide

The user is recommended to read the user guide to find out how to use the work done by the student.