torrent-live - a new bittorrent client for live streaming that protects privacy and blocks the monitoring spies - dynamic torrent blocklist
Download and stream live (while the download is in progress) torrents with your browser, send it to your TV.
Torrent-live is a new open source bittorrent client which detects, blocks and follows the monitoring spies, making your use of the bittorrent network much more private and safe, do not say to everybody what you are really looking for and minimize your visibility, ultimately activate the optional total freerider option, easy to install and use.
Torrent-live is not using unsafe trackers and client/peer exchanges mechanisms, only the bittorrent DHT (Distributed Hash Table).
This project and the related study Monitoring and blocking the bittorrent monitoring spies do not aim to encourage things such as copyright infrigement but aim to protect the users and their privacy from mass surveillance.
Check out torrent-live for a more general presentation and to get the dynamic torrent blocklist.
This is based on the excellent torrent-stream and bittorrent-dht modules.
You just have to initiate a download (magnet:?xt=urn:btih:ef330b39f4801d25b4245212e75a38634bfc856e corresponding to myvideo.mp4) and open your browser on the file that is being downloaded (typically with an URL like file:///D:/torrent/torrent-live/store/myvideo.mp4)
The streaming will start while the file is being downloaded.
If you have already created a blocklist using the 'findspiesonly' options previously or if you have created it by yourself or if you are using our dynamic blocklist, then it will systematically be used to block the related IP addresses, as well as the method to protect your privacy and detect/block the monitoring spies, please see the 'Findspies' section below for more details.
If you have something like Chromecast you can use the Chrome browser and the Cast extension (https://chrome.google.com/webstore/detail/google-cast/boadgeojelhgndaghljhdicfkmllpafd) to send it to your TV.
All usual audio/video formats are supported inside browsers (mp4, webm, avi, mkv, etc).
You can transcode a file on the fly while it is being downloaded (usually in mp4 or webm format), please see the 'Transcoding - File conversion' section below.
Install nodejs v0.11.14 or later for your platform (http://nodejs.org/dist/v0.11.14/)
To install torrent-live:
Go in the directory where you want to install it:
npm install torrent-live
Note: if you fork torrent-live then run npm install to get all the dependencies.
See Issue 2, removing npm for now
Or
Download http://www.peersm.com/torrent-live.zip
Create for example a 'torrent' directory and unzip torrent-live.zip
For those who are not familiar with nodejs, on windows for example:
With your browser download:
http://nodejs.org/dist/v0.11.9/node-v0.11.14-x86.msi
or for a 64 bits conf:
http://nodejs.org/dist/v0.11.9/x64/node-v0.11.14-x64.msi
Then execute the files, this will install node.
To use it:
Open the command line console (on Windows, type 'cmd' in the search/find input in the start menu
or in the find icon that appears on windows 8 when you pass the mouse at the right of the screen)
Go in torrent/torrent-live directory (example: cd D:\torrent\torrent-live)
Run from the command line:
node freerider.js [infohash] or [magnet] or [file.torrent] [webm or mp4](optional)
node freerider.js [infohash] or [magnet] or [file.torrent] [path](optional) [webm or mp4](optional)
The file being downloaded will appear in the 'store' directory (or in the path directory that you have specified) or in a new folder in this directory if there are several files.
Wait (looking at the messages "got for torrent myvideo.mp4 of size 1 GB 220 kBytes of data - Piece number x - remaining y MB - speed: z kbps - time left: 0h15 - number of peers: n") that some MBytes have been downloaded and open your browser with an url pointing to your store/myvideo.mp4 directory (ie file:///D:/torrent/torrent-live/store/myvideo.mp4)
The default path is the 'store' directory in the 'torrent-live' directory, this is where the files will be stored if you don't specify the path parameter.
Examples:
node freerider.js ef330b39f4801d25b4245212e75a38634bfc856e
node freerider.js ef330b39f4801d25b4245212e75a38634bfc856e C:/myvideos/
node freerider.js ef330b39f4801d25b4245212e75a38634bfc856e C:/myvideos/ mp4
node freerider.js movie.torrent
node freerider.js movie.torrent C:/myvideos/
node freerider.js movie.torrent C:/myvideos/ webm
or to download several torrents:
node freerider.js ef330b39f4801d25b4245212e75a38634bfc856e-fa260b39a6627d0326a05efb5698c556b272679d-...
node freerider.js magnet:?xt=urn:btih:ef330b39f4801d25b4245212e75a38634bfc856e
node freerider.js magnet:?xt=urn:btih:ef330b39f4801d25b4245212e75a38634bfc856e 'D:/myvideos'
Data are not retrieved sequentially but are stored sequentially, you can stop/resume a download/streaming at any time.
If for any reasons the player stops inside the browser (or bug) then refresh the page and restart the video where it stopped.
If you want more advanced security/anonymity features you can checkout Peersm and try it, see node-Tor for the technical details.
Please see the method explained in the Findspies section below, torrent-live does change the real infohash for another one close to it, then retrieves the peers that are closest to it, eliminates the spies and finally requests the real infohash to them, then connects to the non spies (limited to 20) among the returned peers.
This does prevent to say to everybody what you are really looking for, spies are eliminated not only during the final phase but all along the process of discovering the peers that have the requested content.
The spies are not the only ones you should protect from, anybody can track you and register/make public your torrenting history:
torrent-live can behave like a total freerider, so unlike usual bittorrent clients, you minimize the visibility of your activities and you are not participating to the torrents.
The only peers who know something about you are those you are connected to, you can see their IP addresses on the console, following the method defined in the 'findspies' section below makes it unlikely that these peers are tracking you.
So you just retrieve the pieces, do not advertise yourself, do not share anything and do not answer to anything, therefore your activity is even more difficult (but not impossible) to detect than with the blocklist only.
This is currently the default, you do not accept any incoming connection and do not participate to anything neither seed anything.
Unlike the other privacy features, it would highly disturb the network if a lot of people were using it, you can deactivate it if you don't like it.
The question remains if it has to stay the default but another question is why the bittorrent clients do nothing to protect you.
You can keep or remove the file(s) at the end of the download, in any case you are never seeding/sending to others what you have downloaded.
The IP addresses are stored in the 'spies.txt' file (["IP address1","IP address2",...,"IP addressN"]) and 'spies.p2p' which is compatible with usual clients blocklists.
The method to detect, block and follow the spies is derived from the study "Monitoring and blocking the bittorrent monitoring spies", which is for now undisclosed, most of the study can be read here: Monitoring and blocking the bittorrent monitoring spies
The study does define the method and explain how to build/maintain a dynamic blocklist.
The below graph does summarize the behavior of the spies, while the number of discovered spies constantly increases, the number of active spies, which are the dangerous ones, does stabilize:
The methodology is the following (please see at the end what we call 'prefix' in what follows), this is a subset of the general method defined in the study to detect, track and block the dangerous spies:
- set a random fake infohash abnormally close to the real one, 'abnormally' means more than 30 bits in common in prefix with the real infohash, choose it randomely so you don't interfer with other torrent-live users
- walk the DHT periodically looking for the fake infohash, respond to queries (findspiesonly option set to true)
- change your nodeID at each new walk with a random one, so you change your path in the DHT and continue looking for spies after you have started the torrent (findspiesonly option set to true)
- ignore the peers returned as "values" until you reach the 40th closest peers for the first walk, add the values received in the blocklist and register as spies those who sent them
- for each infohash, set a nodeID close to the infohash (20-24 bits in common) and launch a process crawling the DHT with this nodeID
- when you reach the 40th closest nodes, ignore those that have a nodeID not in the range of 20 to 24 bits in prefix (if applicable) in common with the fake infohash and those that you have registered as spies
- ignore those that are listed SBL (spam source) or XBL (infected) using DNSBL (DNS Blacklist)
- ignore those that are appearing several time with the same IP address but different ports
- query them with different infohashes abnormally close again from the real infohash, ignore those that are answering with values (ie those pretending to know some peers that are supposed to have something that does not exist)
- start the torrent: ask to the remaining closest nodes the real infohash
- if there are more than 20 results, ignore those that are appearing several time with the same IP address but different ports
- block the known spies (from the blocklist and real-time discovery steps explained above) and ignore the first peers returned (the spies do position themselves to show up first), choose among the remaining peers 20 random peers that do not appear in an abnormal number of torrents (there are different ways to check this, one being to register the peers that are sending an abnormal number of get_peers/announce_peer requests to torrent-live crawlers set in step 5)
- maintain a swarm of 20 peers, if one disconnects, replace it by another one in the list of peers matching the above criteria.
- freerider option to true: do not advertise yourself, do not answer to queries. Due to this some peers might disconnect but the main seeders usually don't, so the swarm will oscillate around 20 peers and stabilize after some time
- the periodical check of the DHT still runs while the torrent is downloaded/streamed to remove real-time the new spies found and increment the blocklist (findspiesonly option set to true)
- test periodically the spies starting with them the bittorrent handshake with the fake infohash and remove those that do not answer any longer (findspiesonly option set to true)
- of course, trackers and the peer exchange protocol/client exchange are not used
- TBD and not implemented yet: ignore the peers that are not following the "DHT security extension (bep42)", ie the peers that have not their nodeIDs tied to their IP addreses, we need to evaluate the percentage of peers that are following this rule.
Prefix: this is the begining of the nodeID or infohash, the more a nodeID and an infohash or a nodeID have bits in common in their prefix, the closest they are, knowing that up to a certain number of bits in common it becomes unlikely that the peers are real ones (example: infohash 'aabbccffff...' and nodeID 'aabbcc0000...' have aabbcc in common, so 24 bits).
In this process the "spies" are the peers that are pretending to have the fake infohash and those that are sending them, their goal being that you connect to them to detect what you are doing.
In addition, torrent-live will block the peers that seem not to behave normally, like peers not answering to pieces requests or with abnormal delays, or wrongly.
Torrent-live might by mistake block some good peers (for example the VPN peers) but this is marginal given the number of peers.
The method does not disturb anything in the bittorrent network and the DHT since the 'sybils' are ephemeral and won't be kept in the peers routing tables (except the crawlers, but there is only one per infohash).
Using the method alone is enough to render quasi null the probability to encounter a spy.
Combining it with the dynamic blocklist makes it even stronger, especially to avoid that the monitors connect to you.
One case you could get caught would result from a combination of very bad luck with a spy really looking after you or a targeted torrent with a dedicated unknown/not suspicious IP address behaving normally in a swarm, so participating to the copyright infrigement in order not to be detected, which would be extraordinary.
Another one would be for a spy not detected in the dynamic blocklist to connect to you and request pieces.
Both are possible but not likely at all, this would require some extra efforts from the monitors and quite a lot of IP addresses in order not to be detected by torrent-live, which they don't have.
There is only one situation that nothing can protect you from: a spy behaving normally in a torrent, it's very unlikely that the copyright monitors do so (some monitors are participating in the swarms but their behavior is never normal and is detected by torrent-live), but others can (police, censors, etc), the problem for them being that they would also be infringing the copyright.
That's why you should keep torrent-live's logs and request very precisely how you got detected if you receive a copyright infringement notice, which in most cases will result to: the monitor was infringing the copyright also or what the monitor did was not enough to prove anything (cf the study).
If the infohash is the one of a particularly monitored torrent, a lot of spies are discovered quickly.
So, assuming that this particularly monitored infohash is 'ef330b39f4801d25b4245212e75a38634bfc856e', you can learn about the spies without starting the torrent and before doing it while running during a certain period:
node freerider.js ef330b39f4801d25b4245212e75a38634bfc856e findspiesonly
node freerider.js movie.torrent findspiesonly
node freerider.js magnet:?xt=urn:btih:ef330b39f4801d25b4245212e75a38634bfc856e findspiesonly
Or, more recommended, you can use the dynamic blocklist that we maintain following the method defined in the study, method that is not easy for anybody to continuously run.
Our crawlers are using the following method to detect and track the spies:
- run simultanously as many processes as your processing capabilities do allow covering the 2^n infohashes space of the bittorrent network, typically n is 10 (so 1024 processes)
- each process implements a nodeID in order to cover the 2^n nodeIDs space of the bittorrent network
- for nodeIDs and infohashes the remaining 160 - n bits part is a random number, most probably the resulting infohash does not exist in the bittorrent network
- each process gets the closest nodes and crawls the DHT sending get_peers requests
- tag as spies the peers returned as values (so those pretending to have something that does not exist) and keep a reference to the infohashes that allowed to discover them
- test the returned peers as values starting with them the bittorrent handshake with the infohash used to discover them and register them in the blocklist if the TCP/uTP connection is successful, if for a given infohash too many peers are answering correctly to the bittorrent handshake then disconsider them and end the related process, the given infohash is an existing one.
- once a process reaches the closest nodes, query them with get_peers request and handle the peers returned as values as explained above, end the process and start a new one with an infohash and a nodeID set to crawl in total the 2^20 (~1 M) bittorrent space (so fill at each new crawl with this process the 20-n remaining bits and choose a random number for the remaining 160 - 20 bits.
- test periodically each spy in the blocklist starting the bittorrent handshake with it with the infohash that allowed to discover it, keep it in the blocklist if the TCP/uTP connection is successful, remove it if not.
- mark as permanent spies those that are implementing several ports/nodeIDs for the same IP and don't check them periodically
The lifetime of each process is about 30s, so an entire cycle to crawl the whole DHT will typically take about 8 hours, this does not disturb the DHT since the processe do nothing else than crawling and won't be kept in the peers routing table since they are ephemeral.
Typically the blocklist oscillates between 10 000 and 40 000 spies, running this method with different servers and making the intersection of the different blocklists ALWAYS gives about 3000 spies in common.
Among the 3000 spies we believe that only a few hundreds are real spies but at a certain point of time it becomes difficult to sort them.
Among these few hundreds some of the spies never rotate their IPs since probably this would become more complicate for them to do the job.
The method is determinist and does allow to catch quasi all the spies, only a few could escape like newcomers or those that rotate their IPs faster than the crawlers' cycles, but that's just a matter of processing capabilities to get them all.
##Deanonymizing the VPN peers
We explain here section "I don't care, I am using a VPN or an anonymizer network" why using a VPN with the bittorrent network is not necessarily a good idea.
A VPN peer has the same deviant behavior than a torrent-live user with the freerider option activated, it cannot seed, neither discuss/share anything except with whom it has already talked to, which is quite limited.
Some methods are known to deanonymize the VPN users, WebRTC, VPN port forwarding and VPN scan, the first one does not really concern the bittorrent users, the second one needs to have port forwarding activated at the VPN level, which is rare, and the target must be attracted to the IP:forwarded port of the attacker, which is not easy, the third one suggests to send requests to the entire IP space to deanonymize a VPN peer, which is quite unlikely.
Some other methods are described here but are more related to bittorrent clients misbehavior/misconfiguration or third parties like trackers leaking the IP addresses of the peers.
So different methods have been presented to deanonymize the VPN peers, none of them being really convincing, ie allowing to quietly deanonymize the VPN peers without using strange methods like attracting them somewhere or scanning the whole IP space, or taking benefit of clients misconfiguration and third parties leakage, we found a new way to do this quietly and real-time without these drawbacks, example:
It has to be noted that the method works for whatever combination of VPNs, anonymizer networks (like Tor) or proxies the peers are using.
In addition, in case a peer cannot straight away be deanonymized the method allow to trace the activity of this peer over time.
And even worse, correlating the tracking information can finally allow to deanonymize a peer at a certain point of time and get the complete history of possible IPs he used during that period.
More to come.
If you need to convert a file you can use applications like VLC, but the converted file might be broken, we usually follow what is indicated in the Links section of Peersm, 'Adding and audio/video - simple way' and run the specified 'very intuitive' command to convert into a webm format. Another advantage of doing this is that the file will be formatted for adaptive streaming and if it is seeded people will be able to download and stream it anonymously using Peersm application
Torrent-live does allow to transcode a file on the fly, if you are using something like Chromecast it can happen that some formats like avi and mkv do not play, it is recommended to transcode them in mp4 or webm format, you can then stream the file while it is being transcoded:
node freerider.js ef330b39f4801d25b4245212e75a38634bfc856e mp4/webm
node freerider.js movie.torrent mp4/webm
node freerider.js magnet:?xt=urn:btih:ef330b39f4801d25b4245212e75a38634bfc856e mp4/webm
node freerider.js magnet:?xt=urn:btih:ef330b39f4801d25b4245212e75a38634bfc856e 'D:/myvideos' mp4/webm
The transcoded file 'example.mp4/webm' is stored progressively in the store directory or 'D:/myvideos', load it as file:///D:/myvideo/example.mp4/webm inside your browser to stream it.
For transcoding you must install ffmpeg that you can find here, the installation is easy, just unzip it, then you must pass to torrent-live the path to ffmpeg.exe:
node freerider.js ef330b39f4801d25b4245212e75a38634bfc856e mp4/webm 'C:/Program Files/ffmpeg/ffmpeg-20150113-git-b23a866-win32-static/bin/ffmpeg.exe'
node freerider.js movie.torrent mp4/webm 'C:/Program Files/ffmpeg/ffmpeg-20150113-git-b23a866-win32-static/bin/ffmpeg.exe'
node freerider.js magnet:?xt=urn:btih:ef330b39f4801d25b4245212e75a38634bfc856e mp4/webm 'C:/Program Files/ffmpeg/ffmpeg-20150113-git-b23a866-win32-static/bin/ffmpeg.exe'
node freerider.js magnet:?xt=urn:btih:ef330b39f4801d25b4245212e75a38634bfc856e 'D:/myvideos' mp4/webm 'C:/Program Files/ffmpeg/ffmpeg-20150113-git-b23a866-win32-static/bin/ffmpeg.exe'
Just use simple magnet links formatted as the above examples with the infohash information only ('ef330b39f4801d25b4245212e75a38634bfc856e' here), do not use other formats, it's easy to retrieve the infohash information on the internet or to deduct it from trackers links.
If you don't have the infohash, then retrieve the .torrent file and torrent-live will retrieve the infohash and use it, do not open the .torrent file with your usual bittorrent client to retrieve the infohash.
Do not use trackers sites and do not follow their wrong and insecure recommendations, like not using the DHT.
Using the DHT, there are no requirements that you must share what you download and ratio enforcement stories.
If for a given infohash the download does not start, then it probably means that nobody is serving this file, or that there is a bug somewhere, please advise if you are suspecting the later.
More user friendly web based interface.
node freerider.js [infohash1-infohash2-...] [mp4/webm] [ffmpeg_path]
node freerider.js [magnet1-magnet2-...] [mp4/webm] [ffmpeg_path]
node freerider.js [movie.torrent] [mp4/webm] [ffmpeg_path]
node freerider.js [a1-a2-...] [path] [mp4/webm] [ffmpeg_path]
node freerider.js [infohash1-infohash2-...] findspiesonly
node freerider.js [magnet1-magnet2-...] findspiesonly
node freerider.js [movie.torrent] findspiesonly