This is a new commercial BIOS for HUANANZHI X99-CH8 Motherboard for 24/7 use role Server or Workstation. Build CX99DE41, April 28, 2023.
CX99DE41 BIOS for HUANANZHI X99-CH8 Server/Workstation Motherboard Review.
✔️ Notice: distribution for russia is prohibited.
FIRMWARE FEATURES
- UEFI Only ✔️ (Legacy devices not supported)
- AST2300/AST2400 work in UEFI mode ✔️
- Set FSB to 100 MHz ✔️
- Built-in EFI Shell ✔️
- EFI/OROM for RSTe SATA(Port 0-3)/sSATA(Port 4-7) to v6.2.0.1034 (Full I/O speed) ✔️
- EFI Realtek UNDI PCIe GbE Family Controller Driver v2.056 ✔️
- Supported ECC/Registered DDR4 memory type UDIMM/RDIMM/LRDIMM ✔️
- ME firmware to v9.1.45.3000 (5MiB) ✔️
- CPU microcode ✔️
- DMI Data ✔️
HOW TO UPDATE THE FIRMWARE
⚠️ If you have factory stock firmware - YOU MUST USE A PROGRAMMER DEVICE! (e.g. EZP-2019 or CH341A)
- Burn the firmware with a programmer device. (e.g. EZP-2019 or CH341A)
- Clear CMOS by plugging motherboard power cables and removing the CMOS battery for a few seconds then plug again.
- After restart load setup default by entering the BIOS setting and then Restore Defaults -> F10 -> Enter
- Configure RAM timings and other settings and enjoy!
SCREENSHOTS
DRIVERS DOWNLOAD
Intel Chipset Driver for Windows 10/11 x64 Download
IRSTe SATA RAID Driver for Windows 10/11 x64 Download
PCIe Realtek GbE Driver for Windows 10/11 x64 Download
Realtek High Definition Audio Drivers 2.81 for Windows 10/11 x64 Download (Google Search)