BPI-SINOVOIP/BPI-R2-bsp

Issues

• otg not working

  #40 opened 5 years ago by frank-w
  0

• R2 board might hang at uboot

  #13 opened 8 years ago by garywangcn
  6

• Preloader's uboot load size

  #39 opened 6 years ago by rayddteam
  2

• What's the maximum size for the SD card

  #38 opened 6 years ago by symsymmas
  2

• GE Port Could not support 10Mb and 100Mb, just only support 1Gb

  #34 opened 7 years ago by JackZengBpi
  2

• USB3.0 (XHCI) Limited Problem

  #33 opened 7 years ago by JackZengBpi
  0

• kernel compilation failed

  #31 opened 7 years ago by ethicstechOSS
  5

• Kernel compilation failed (configuration multimedia support on module instead of builded in)

  #32 opened 7 years ago by VivienLaure
  0

• powerdown not working

  #16 opened 8 years ago by frank-w
  9

• [uboot] uenv.txt is not loaded before display bootmenu

  #30 opened 7 years ago by frank-w
  0

• Linux kernel 4.4.70 can't boot successfully

  #5 opened 8 years ago by garywangcn
  5

• Environment of u-boot won't save in sd cart when boot from external sd card.

  #28 opened 7 years ago by weiqi-chen
  3

• Using 4G module with R2 will occur DNS error in some usage scenarios

  #25 opened 7 years ago by JackZengBpi
  2

• is it i2s or i2c?

  #22 opened 7 years ago by frank-w
  3

• mt6625l using major-device-number from spi

  #27 opened 7 years ago by frank-w
  0

• dkpg error on Linux Kernel version syntax

  #26 opened 7 years ago by anonimou0
  0

• Somtimes HDMI doesn't work fine

  #7 opened 8 years ago by garywangcn
  4

• u-boot build failing to build (with error) but 'Build success!' on 32 bit hosts

  #14 opened 8 years ago by AaronNGray
  1

• switch driver for vlan-tagging

  #6 opened 7 years ago by frank-w
  1

• unable to disable tx-checksum-ipv4 for both eth0 and eth1

  #23 opened 7 years ago by garywangcn
  3

• Bug in init of ethernet driver?

  #21 opened 7 years ago by andreas74a
  3

• GPIO not working

  #17 opened 8 years ago by AceAsket
  24

• uart0/1 TX not working

  #19 opened 7 years ago by frank-w
  1

• u-boot: BPI-R2 ignore power button if SD card not inserted.

  #9 opened 8 years ago by rayddteam
  26

• build.sh complete with logging

  #18 opened 8 years ago by frank-w
  3

• MT7623 preloader source code

  #15 opened 8 years ago by renzenicolai
  3

• u-boot: SATA support

  #10 opened 8 years ago by rayddteam
  2

• To support cpu freq governor

  #12 opened 8 years ago by garywangcn
  2

• Update mt7623.dtsi to support multiple uart and GPIO

  #11 opened 8 years ago by frank-w
  6

• The driver for Wifi module(MT6625) is not available

  #1 opened 8 years ago by garywangcn
  7

• build.sh does not check for success

  #8 opened 8 years ago by frank-w
  5

• Both PWM4 and PWM5 of MT7623n on R2 are NOT working

  #3 opened 8 years ago by garywangcn
  2

• HDMI audio is not working

  #4 opened 8 years ago by garywangcn
  4

• The MIPI driver in Kernel 4.4.70 is not working fine

  #2 opened 8 years ago by garywangcn
  0