Angular 2 Grid

Angular 2 grid is a drag/drop/resize grid-based plugin directive for Angular 2. The demo included in this repo follows the Angular 2 quick start

Setup

To use the Angular 2 Grid system, simply run npm install angular2-grid and then include the NgGridModule in your project module imports (see Example for more details).

If you want to help with development or try the demo, it's less simple, but not hard. First you'll need to install Node and check out a copy of the repo. Then run:

$ npm install
$ typings install
$ gulp build

This will give you a fully compiled version of the demo that you can run using the HTTP server of your choice.

You can also use gulp watch to compile the demo and have gulp watch for any changes.

NOTE: By default Angular 2 and System.js are not listed as actual dependencies, but as peer dependencies, so that npm doesn't install them on systems that just require the install file. If they are not installed, this could cause gulp to break. To fix this, run npm install angular2 systemjs and rerun the build command.

Config

To use this in your own application, all you need to do is add the [ngGrid] attribute to your container element and [ngGridItem] to each item. You can use this in conjunction with NgFor to create a truly dynamic angular grid.

To configure the grid with your own options, it is as easy as adding them as the attribute value. The defaults for the grid are:

{
    'margins': [10],            //  The size of the margins of each item. Supports up to four values in the same way as CSS margins. Can be updated using setMargins()
    'draggable': true,          //  Whether the items can be dragged. Can be updated using enableDrag()/disableDrag()
    'resizable': true,          //  Whether the items can be resized. Can be updated using enableResize()/disableResize()
    'max_cols': 0,              //  The maximum number of columns allowed. Set to 0 for infinite. Cannot be used with max_rows
    'max_rows': 0,              //  The maximum number of rows allowed. Set to 0 for infinite. Cannot be used with max_cols
    'visible_cols': 0,          //  The number of columns shown on screen when auto_resize is set to true. Set to 0 to not auto_resize. Will be overriden by max_cols
    'visible_rows': 0,          //  The number of rows shown on screen when auto_resize is set to true. Set to 0 to not auto_resize. Will be overriden by max_rows
    'min_cols': 0,              //  The minimum number of columns allowed. Can be any number greater than or equal to 1.
    'min_rows': 0,              //  The minimum number of rows allowed. Can be any number greater than or equal to 1.
    'col_width': 250,           //  The width of each column
    'row_height': 250,          //  The height of each row
    'cascade': 'up',            //  The direction to cascade grid items ('up', 'right', 'down', 'left')
    'min_width': 100,           //  The minimum width of an item. If greater than col_width, this will update the value of min_cols
    'min_height': 100,          //  The minimum height of an item. If greater than row_height, this will update the value of min_rows
    'fix_to_grid': false,       //  Fix all item movements to the grid
    'auto_style': true,         //  Automatically add required element styles at run-time
    'auto_resize': false,       //  Automatically set col_width/row_height so that max_cols/max_rows fills the screen. Only has effect is max_cols or max_rows is set
    'maintain_ratio': false,    //  Attempts to maintain aspect ratio based on the colWidth/rowHeight values set in the config
    'prefer_new': false,        //  When adding new items, will use that items position ahead of existing items
    'limit_to_screen': false,   //  When resizing the screen, with this true and auto_resize false, the grid will re-arrange to fit the screen size. Please note, at present this only works with cascade direction up.
    'center_to_screen': false,  //  When resizing the screen, with this true and limit_to_screen true, the grid will center itself to the screen if max columns width is smaller than the grid width.
    'resize_directions': [      //  The enabled resize directions in priority order
        "bottomright",          //  If two directions overlap, e.g. bottomright and right, the direction that appears first in this list will be used
        "bottomleft",
        "topright",
        "topleft",
        "right",
        "left",
        "bottom",
        "top"
    ],
}

The defaults for the grid item are:

{
    'col': 1,               //  The start column for the item
    'row': 1,               //  The start row for the item
    'sizex': 1,             //  The start width in terms of columns for the item
    'sizey': 1,             //  The start height in terms of rows for the item
    'dragHandle': null,     //  The selector to be used for the drag handle. If null, uses the whole item
    'resizeHandle': null,   //  The selector to be used for the resize handle. If null, uses 'borderSize' pixels from the right for horizontal resize,
                            //    'borderSize' pixels from the bottom for vertical, and the square in the corner bottom-right for both
    'borderSize': 15,
    'fixed': false,         //  If the grid item should be cascaded or not. If yes, manual movement is required
    'draggable': true,      //  If the grid item can be dragged. If this or the global setting is set to false, the item cannot be dragged.
    'resizable': true,      //  If the grid item can be resized. If this or the global setting is set to false, the item cannot be resized.
    'payload': null,        //  An optional custom payload (string/number/object) to be used to identify the item for serialization
    'maxCols': 0,           //  The maximum number of columns for a particular item. This value will only override the value from the grid (if set) if it is smaller
    'minCols': 0,           //  The minimum number of columns for a particular item. This value will only override the value from the grid if larger
    'maxRows': 0,           //  The maximum number of rows for a particular item. This value will only override the value from the grid (if set) if it is smaller
    'minRows': 0,           //  The minimum number of rows for a particular item. This value will only override the value from the grid if larger
    'minWidth': 0,          //  The minimum width of a particular item. This value will override the value from the grid, as well as the minimum columns if the resulting size is larger
    'minHeight': 0,         //  The minimum height of a particular item. This value will override the value from the grid, as well as the minimum rows if the resulting size is larger
    'resizeDirections': null,  //  The enabled resize directions in priority order. If null, uses the 'resize_directions' for the grid
}

Event Handling

Both the NgGrid and NgGridItem throw events when an item is moved or resized. The grid has the following:

onDragStart(item)     //  When an item starts being dragged. Returns reference to corresponding NgGridItem
onDrag(item)          //  When an item moves while dragging. Returns reference to corresponding NgGridItem
onDragStop(item)      //  When an item stops being dragged. Returns reference to corresponding NgGridItem
onResizeStart(item)   //  When an item starts being resized. Returns reference to corresponding NgGridItem
onResize(item)        //  When an item is resized. Returns reference to corresponding NgGridItem
onResizeStop(item)    //  When an item stops being resized. Returns reference to corresponding NgGridItem
onItemChange(items)   //  When any item stops being dragged or resized. Returns an array of NgGridItemEvents in the order in which each item was added to the grid

The individual items will also throw the following events:

onDragStart()     //  When the item starts being dragged.
onDrag()          //  When the item moves while dragging.
onDragStop()      //  When the item stops being dragged.
onDragAny()       //  When the item starts/stops/is being dragged.
onResizeStart()   //  When the item starts being resized.
onResize()        //  When the item is resized.
onResizeStop()    //  When the item stops being resized.
onResizeAny()     //  When the item starts/stops/is being resized.
onChangeStart()   //  When the item starts being dragged or resized.
onChange()        //  When the item is dragged or resized.
onChangeStop()    //  When the item stops being dragged or resized.
onChangeAny()     //  When the item starts/stops/is being dragged or resized.
onItemChange()    //  When either the item's grid size or position is changed.

Each event will also provide the following object to any callback functions:

interface NgGridItemEvent {
    payload: any,   //  The item's optional custom payload (string/number/object) to be used to identify the item for serialization
    col: number,    //  The item's column position within the grid
    row: number,    //  The item's row position within the grid
    sizex: number,  //  The item's column size within the grid
    sizey: number,  //  The item's row size within the grid
    width: number,  //  The item's raw width value
    height: number, //  The item's raw height value
    left: number,   //  The item's offset left value
    top: number     //  The item's offset top value
}

Styling

There are three elements that can be styled with angular2-grid, the grid itself .grid, the items .grid-item and the placeholder .placeholder. The demo includes some basic styling in NgGrid.css which you can include in your app's styleUrls property. It also includes some @media queries styles to handle responsiveness on smaller screens. This simple force the boxes to full width and puts them inline in their original order. This is optional functionality and does not need to be included. In order for correct functionality, the required styles are added by the classes themselves at run-time:

.grid {
    position: relative;
}

.grid-item {
    position: absolute;
}

.grid-item.moving {
    z-index: z-index + 1;
}

.placeholder {
    position: absolute;
}

You can prevent these styles being automatically added by setting the value of 'auto_size' to be false. You will then need to ensure that they are correctly incorporated into your user styles instead.

NOTE: The grid system sets the values width, height, left, top in CSS to move and resize the elements. This cannot be disabled.

Example

The NgGrid and NgGridItem can be configured by binding directly to the directive. The NgGridItem supports two-way binding so you don't need to bind to any of the above events. The NgGridItemChange event emits under the same conditions as onChangeStop. The only config values that will change are col, row, sizex and sizey; the rest of your configuration will persist. You can then use these values for serialization of the grid. By binding the configuration this way, you are able to update the values on the fly. Here is an example template of the grid with two-way item bindings:

<div [ngGrid]="{'resizeable': false, 'margins': [5, 10]}">
    <div *ngFor="let box of boxes" [(ngGridItem)]="box.config">
        <div class="title">{{box.title}}</div>
        <p>{{box.text}}</p>
    </div>
</div>

In order to include the relevant files, you will need to import the NgGridModule to your app and add them to the @NgModule imports. This can be achieved by adding:

import { NgGridModule } from 'angular2-grid';

to your typescript imports, and ensuring that your @NgModule annotation looks similar to the following:

@NgModule({
    ...,
    imports: [
        ...,
        NgGridModule,
        ...
    ],
    ...
})

As of the Angular 2 Release Candidate you will now need to have the following in your System.js configuration, assuming that you are following the same format as the Angular 2 Quick Start:

// latest version of angular2-grid
map: {
    'angular2-grid': 'node_modules/angular2-grid/bundles'
}

packages: {
    'angular2-grid': { main: 'NgGrid.umd.js',  defaultExtension: 'js' }
}

// earlier versions
map: {
    'angular2-grid': 'node_modules/angular2-grid/dist/js'
}

packages: {
    'angular2-grid': { main: 'main.js',  defaultExtension: 'js' }
}

Alternatively, for earlier versions you can use the bundled version by setting the map value to 'node_modules/angular2-grid/dist/bundles' and the main value within packages to NgGrid.min.js.