BastilleResearch/gr-lora
GNU Radio OOT module implementing the LoRa PHY, based on https://github.com/matt-knight/research/tree/master/2016_05_20_jailbreak
C++GPL-3.0
Issues
- 2
Camke error
#46 opened by Mkishore1 - 1
- 0
the ralationship between spread factor and header?
#44 opened by Ken-Go - 7
Issue with Decoding!!
#41 opened by riatankarsahu - 0
Port gr-lora from GR3.7 to GR3.8
#43 opened - 0
Deinterleaved codewords incorrect order
#42 opened by tweej - 1
- 2
Decode data from RN2483
#39 opened by DmitriiCM - 1
- 10
gr-lora does not receive the messages
#15 opened by nickes - 0
Import LoRa Error
#37 opened by ajonumanyi - 1
Can this code run in 2.4GHz?
#36 opened by wwwzrb - 7
- 0
UDP stream
#35 opened by 6d6176 - 8
tr_usrp.grc not transmitting via usrp
#27 opened by nilampradhan2 - 0
Dragino setup > no documentation
#34 opened by daredevilbsd - 0
Error on tx_usrp example
#33 opened by JaymeNeto - 0
Error in the modulator block
#32 opened by JaymeNeto - 1
- 0
low data rate opt set to 0 will not work
#31 opened by orkfire - 0
Receive incorrect data on Pycom LoPy LoRa
#30 opened by nilampradhan2 - 1
LoRa RX/TX example doesn't receive data
#23 opened by sajanikapukotuwa - 1
about the gray coding
#26 opened by orkfire - 2
gr-lora decode faild
#25 opened by cn0xroot - 8
- 2
which is type of gr-lora input modulator?
#17 opened by stackprogramer - 3
Resampling
#16 opened by RyabchikSib - 1
B200
#28 opened by nilampradhan2 - 2
Failure to decode messages from Multitech xDot
#24 opened by jcard0na - 0
unable to run the default examples
#22 opened by sajanikapukotuwa - 6
Explicit HDR
#13 opened by ThenTech - 2
- 14
- 2
- 0
CMake Warnings
#18 opened by matt-knight - 2
Adding Encrypt/Decrypt LoRa
#8 opened by drtyhlpr - 4
- 4
- 3
Source - out(0): Port is not connected.
#6 opened by zoutepopcorn - 1
Improve the whitening sequence
#2 opened by matt-knight - 0
- 0
PHY header support
#3 opened by matt-knight - 0
PHY CRC support
#4 opened by matt-knight