/openpilot

open source driving agent

Primary LanguageCMIT LicenseMIT

Welcome to openpilot

openpilot is an open source driving agent. Currently it performs the functions of Adaptive Cruise Control (ACC) and Lane Keeping Assist System (LKAS) for Hondas, Acuras, Toyotas, and a Chevy. It's about on par with Tesla Autopilot and GM Super Cruise, and better than all other manufacturers.

The openpilot codebase has been written to be concise and enable rapid prototyping. We look forward to your contributions - improving real vehicle automation has never been easier.

Community

openpilot is developed by comma.ai and users like you.

We have a Twitter you should follow.

Also, we have a 3500+ person community on slack.

Hardware

Right now openpilot supports the EON Dashcam DevKit. We'd like to support other platforms as well.

Install openpilot on a neo device by entering https://openpilot.comma.ai during NEOS setup.

Supported Cars

Make Model Supported Package Lateral Longitudinal No Accel Below No Steer Below
Acura ILX 2016 AcuraWatch Plus Yes Yes 25mph1 25mph
Acura ILX 2017 AcuraWatch Plus Yes Yes 25mph1 25mph
Acura RDX 2018 AcuraWatch Plus Yes Yes 25mph1 12mph
GM3 Volt 2017 Adaptive Cruise Yes Yes 0mph 7mph
GM3 Volt 2018 Adaptive Cruise Yes Yes 0mph 7mph
Honda Accord 2018 All Yes Stock 0mph 3mph
Honda Civic 2016 Honda Sensing Yes Yes 0mph 12mph
Honda Civic 2017 Honda Sensing Yes Yes 0mph 12mph
Honda Civic 2017 (Hatch) Honda Sensing Yes Stock 0mph 12mph
Honda Civic 2018 Honda Sensing Yes Yes 0mph 12mph
Honda Civic 2018 (Hatch) Honda Sensing Yes Stock 0mph 12mph
Honda CR-V 2015 Touring Yes Yes 25mph1 12mph
Honda CR-V 2016 Touring Yes Yes 25mph1 12mph
Honda CR-V 2017 Honda Sensing Yes Stock 0mph 12mph
Honda CR-V 2018 Honda Sensing Yes Stock 0mph 12mph
Honda Odyssey 2017 Honda Sensing Yes Yes 25mph1 0mph
Honda Odyssey 2018 Honda Sensing Yes Yes 25mph1 0mph
Honda Odyssey 2019 Honda Sensing Yes Yes 25mph1 0mph
Honda Pilot 2017 Honda Sensing Yes Yes 25mph1 12mph
Honda Pilot 2018 Honda Sensing Yes Yes 25mph1 12mph
Honda Pilot 2019 All Yes Yes 25mph1 12mph
Honda Ridgeline 2017 Honda Sensing Yes Yes 25mph1 12mph
Honda Ridgeline 2018 Honda Sensing Yes Yes 25mph1 12mph
Hyundai6 Santa Fe 2019 All Yes Stock 0mph 0mph
Hyundai6 Elantra 2017 SCC + LKAS Yes Stock 19mph 34mph
Hyundai6 Genesis 2018 All Yes Stock 19mph 34mph
Kia6 Sorento 2018 All Yes Stock 0mph 0mph
Kia6 Stinger 2018 SCC + LKAS Yes Stock 0mph 0mph
Lexus RX Hybrid 2017 All Yes Yes2 0mph 0mph
Lexus RX Hybrid 2018 All Yes Yes2 0mph 0mph
Toyota Camry 20184 All Yes Stock 0mph5 0mph
Toyota C-HR 20184 All Yes Stock 0mph 0mph
Toyota Corolla 2017 All Yes Yes2 20mph 0mph
Toyota Corolla 2018 All Yes Yes2 20mph 0mph
Toyota Highlander 2017 All Yes Yes2 0mph 0mph
Toyota Highlander Hybrid 2018 All Yes Yes2 0mph 0mph
Toyota Prius 2016 TSS-P Yes Yes2 0mph 0mph
Toyota Prius 2017 All Yes Yes2 0mph 0mph
Toyota Prius 2018 All Yes Yes2 0mph 0mph
Toyota Prius Prime 2017 All Yes Yes2 0mph 0mph
Toyota Prius Prime 2018 All Yes Yes2 0mph 0mph
Toyota Rav4 2016 TSS-P Yes Yes2 20mph 0mph
Toyota Rav4 2017 All Yes Yes2 20mph 0mph
Toyota Rav4 2018 All Yes Yes2 20mph 0mph
Toyota Rav4 Hybrid 2017 All Yes Yes2 0mph 0mph
Toyota Rav4 Hybrid 2018 All Yes Yes2 0mph 0mph

1Comma Pedal is used to provide stop-and-go capability to some of the openpilot-supported cars that don't currently support stop-and-go. Here is how to build a Comma Pedal. NOTE: The Comma Pedal is not officially supported by comma.ai
2When disconnecting the Driver Support Unit (DSU), otherwise longitudinal control is stock ACC. For DSU locations, see Toyota Wiki page
3GM installation guide
4It needs an extra 120Ohm resistor (pic1, pic2) on bus 3 and giraffe switches set to 01X1 (11X1 for stock LKAS), where X depends on if you have the comma power.
528mph for Camry 4CYL L, 4CYL LE and 4CYL SE which don't have Full-Speed Range Dynamic Radar Cruise Control.
6Giraffe is under development: architecture similar to Toyota giraffe, with an extra 120Ohm resistor on bus 3.

Community Maintained Cars

Make Model Supported Package Lateral Longitudinal No Accel Below No Steer Below
Honda Fit 2018 Honda Sensing Yes Yes 25mph1 12mph

[Honda Fit Pull Request].

Community Maintained Cars are not confirmed by comma.ai to meet our safety model. Be extra cautious using them.

In Progress Cars

  • All TSS-P Toyota with Steering Assist.
    • 'Full Speed Range Dynamic Radar Cruise Control' is required to enable stop-and-go. Only the Prius, Camry and C-HR have this option.
    • Even though the Tundra, Sequoia and the Land Cruiser have TSS-P, they don't have Steering Assist and are not supported.
  • All LSS-P Lexus with Steering Assist or Lane Keep Assist.
    • 'All-Speed Range Dynamic Radar Cruise Control' is required to enable stop-and-go. Only the GS, GSH, F, RX, RXH, LX, NX, NXH, LC, LCH, LS, LSH have this option.
    • Even though the LX have TSS-P, it does not have Steering Assist and is not supported.
  • All Hyundai with SmartSense.
  • All Kia with SCC and LKAS.

How can I add support for my car?

If your car has adaptive cruise control and lane keep assist, you are in luck. Using a panda and cabana, you can understand how to make your car drive by wire.

We've written guides for Brand and Model ports. These guides might help you after you have the basics figured out.

  • BMW, Audi, Volvo, and Mercedes all use FlexRay and are unlikely to be supported any time soon.
  • We put time into a Ford port, but the steering has a 10 second cutout limitation that makes it unusable.
  • The 2016-2017 Honda Accord use a custom signaling protocol for steering that's unlikely to ever be upstreamed.

Directory structure

.
├── apk                 # The apk files used for the UI
├── cereal              # The messaging spec used for all logs on EON
├── common              # Library like functionality we've developed here
├── installer/updater   # Manages auto-updates of openpilot
├── opendbc             # Files showing how to interpret data from cars
├── panda               # Code used to communicate on CAN and LIN
├── phonelibs           # Libraries used on EON
├── pyextra             # Libraries used on EON
└── selfdrive           # Code needed to drive the car
    ├── assets          # Fonts and images for UI
    ├── boardd          # Daemon to talk to the board
    ├── can             # Helpers for parsing CAN messages
    ├── car             # Car specific code to read states and control actuators
    ├── common          # Shared C/C++ code for the daemons
    ├── controls        # Perception, planning and controls
    ├── debug           # Tools to help you debug and do car ports
    ├── locationd       # Soon to be home of precise location
    ├── logcatd         # Android logcat as a service
    ├── loggerd         # Logger and uploader of car data
    ├── proclogd        # Logs information from proc
    ├── sensord         # IMU / GPS interface code
    ├── test            # Car simulator running code through virtual maneuvers
    ├── ui              # The UI
    └── visiond         # Embedded vision pipeline

To understand how the services interact, see selfdrive/service_list.yaml

User Data / chffr Account / Crash Reporting

By default openpilot creates an account and includes a client for chffr, our dashcam app. We use your data to train better models and improve openpilot for everyone.

It's open source software, so you are free to disable it if you wish.

It logs the road facing camera, CAN, GPS, IMU, magnetometer, thermal sensors, crashes, and operating system logs. The user facing camera is only logged if you explicitly opt-in in settings. It does not log the microphone.

By using it, you agree to our privacy policy. You understand that use of this software or its related services will generate certain types of user data, which may be logged and stored at the sole discretion of comma.ai. By accepting this agreement, you grant an irrevocable, perpetual, worldwide right to comma.ai for the use of this data.

Testing on PC

There is rudimentary infrastructure to run a basic simulation and generate a report of openpilot's behavior in different scenarios.

# Requires working docker
./run_docker_tests.sh

The resulting plots are displayed in selfdrive/test/tests/plant/out/longitudinal/index.html

More extensive testing infrastructure and simulation environments are coming soon.

Contributing

We welcome both pull requests and issues on github. Bug fixes and new car ports encouraged.

Want to get paid to work on openpilot? comma.ai is hiring

Licensing

openpilot is released under the MIT license. Some parts of the software are released under other licenses as specified.

Any user of this software shall indemnify and hold harmless Comma.ai, Inc. and its directors, officers, employees, agents, stockholders, affiliates, subcontractors and customers from and against all allegations, claims, actions, suits, demands, damages, liabilities, obligations, losses, settlements, judgments, costs and expenses (including without limitation attorneys’ fees and costs) which arise out of, relate to or result from any use of this software by user.

THIS IS ALPHA QUALITY SOFTWARE FOR RESEARCH PURPOSES ONLY. THIS IS NOT A PRODUCT. YOU ARE RESPONSIBLE FOR COMPLYING WITH LOCAL LAWS AND REGULATIONS. NO WARRANTY EXPRESSED OR IMPLIED.