Epiphanies TMK Keyboard Firmware Collection

This repository includes keyboard and controller firmware projects built with [tmk_core][tmk_core] keyboard library.

The latest source code for the core library is available here: http://github.com/tmk/tmk_keyboard

The latest source code for the individual projects is available here: https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard

This repository only contains the configuration files for the Bathroom Epiphaneis projects. To build the firmwares with tmk_keyboard you need to check out the tmk_keyboard repository and move the be_controller or be_keyboard folders to the root of that repository.

Projects

be_keyboard

be_controller

License

GPLv2 or later. Some protocol files are under Modified BSD License.

Third party libraries like LUFA, PJRC and V-USB have their own license respectively.

Build Firmware and Program Controller

See tmk_core/doc/build.md.

Change your keymap

See tmk_core/doc/keymap.md.

Magic Commands

To see help press Magic + H.

Magic key combination is LShift + RShift in many projects, but Power key on ADB converter. Magic keybind can be vary on each project, check config.h in project directory.

Following commands can be also executed with Magic + key. In console mode Magic keybind is not needed.

----- Command Help -----
c:      enter console mode
d:      toggle debug enable
x:      toggle matrix debug
k:      toggle keyboard debug
m:      toggle mouse debug
v:      print device version & info
t:      print timer count
s:      print status
e:	    print eeprom config
n:	    toggle NKRO
0/F10:  switch to Layer0
1/F1:   switch to Layer1
2/F2:   switch to Layer2
3/F3:   switch to Layer3
4/F4:   switch to Layer4
PScr:   power down/remote wake-up
Caps:   Lock Keyboard(Child Proof)
Paus:   jump to bootloader

Boot Magic Configuration - Virtual DIP Switch

Boot Magic are executed during boot up time. Press Magic key below then plug in keyboard cable. Note that you must use keys of Layer 0 as Magic keys. These settings are stored in EEPROM so that retain your configure over power cycles.

To avoid configuring accidentally additive salt key KC_SPACE also needs to be pressed along with the following configuration keys. The salt key is configurable in config.h. See tmk_core/common/bootmagic.h.

General

Skip reading EEPROM to start with default configuration(ESC)
Clear configuration stored in EEPROM to reset configuration(Backspace)

Bootloader

Kick up Bootloader(B)

Debug

Debug enable(D)
Debug matrix enable(D+X)
Debug keyboard enable(D+K)
Debug mouse enable(D+M)

Keymap

Swap Control and CapsLock(Left Control)
Change CapsLock to Control(Caps Lock)
Swap LeftAlt and Gui(Left Alt)
Swap RightAlt and Gui(Right Alt)
Disable Gui(Left Gui)
Swap Grave and Escape(Grave)
Swap BackSlash and BackSpace(Back Slash)
Enable NKRO on boot(N)

Default Layer

Set Default Layer to 0(0)
Set Default Layer to 1(1)
Set Default Layer to 2(2)
Set Default Layer to 3(3)
Set Default Layer to 4(4)
Set Default Layer to 5(5)
Set Default Layer to 6(6)
Set Default Layer to 7(7)

Mechanical Locking support

This feature makes it possible for you to use mechanical locking switch for CapsLock, NumLock or ScrollLock. To enable this feature define these macros in config.h and use KC_LCAP, KC_LN UM or KC_LSCR in keymap for locking key instead of normal KC_CAPS, KC_NLCK or KC_SLCK. Res ync option tries to keep switch state consistent with keyboard LED state.

#define LOCKING_SUPPORT_ENABLE
#define LOCKING_RESYNC_ENABLE

Start Your Own Project

Add tmk_core into your repository using git submodule or git subtree.
Copy files from tmk_keybaord or other project similar to yours
Edit those files to support your keyboard.

See these as examples.

Debugging

Use PJRC's hid_listen to see debug messages. You can use xprintf() to display debug info, see tmk_core/common/xprintf.h.

https://www.pjrc.com/teensy/hid_listen.html

Files and Directories

Top

keyboard/ - keyboard projects
controller/ - keyboard controller projects
tmk_core/ - core library
tmk_core/doc/ - documents