Ergonomic, versatile, strong types wrapping MIDI 2.0 message data.
This implementation of MIDI 2.0 is based on the 1.1 revision of the specifications. See the official MIDI 2.0 specification for more details on the data protocol standard.
Caution
This project is still in early development.
Expect breaking changes and bugs, and please report any issues you encounter.
We would welcome contributions! Please refer to the CONTRIBUTOR.md
A strongly typed message wrapper is provided for every message in the MIDI 2.0 specification.
use midi2::prelude::*;
// Messages have a simple setter / getter interface
let mut note_on = channel_voice2::NoteOn::<[u32; 4]>::new();
note_on.set_group(u4::new(0x8));
note_on.set_channel(u4::new(0xA));
note_on.set_note_number(u7::new(0x5E));
note_on.set_velocity(0x6A14);
assert_eq!(note_on.group(), u4::new(0x8));
assert_eq!(note_on.channel(), u4::new(0xA));
assert_eq!(note_on.note_number(), u7::new(0x5E));
assert_eq!(note_on.velocity(), 0x6A14);
// Messages wrap an underlying buffer of data which can be read as an
// ordinary slice.
let mut composer_name = flex_data::ComposerName::<Vec<u32>>::new();
composer_name.set_name("Pinch b2b Peverelist");
assert_eq!(
composer_name.data(),
&[
0xD050_0105,
0x5069_6E63,
0x6820_6232,
0x6220_5065,
0xD0D0_0105,
0x7665_7265,
0x6C69_7374,
0x0000_0000,
]);
All message wrappers are grouped into aggregate enum types. There's a top level enum type which can represent all messages, and there's sub enum types for each different UMP type specified by the MIDI 2.0 specification.
fn handle_message(buffer: &[u32]) {
use midi2::prelude::*;
match UmpMessage::try_from(buffer) {
Ok(UmpMessage::ChannelVoice2(m)) => {
println!("Channel Voice2: channel: {}", m.channel());
match m {
channel_voice2::ChannelVoice2::NoteOn(m) => {
println!("Note On! note: {}, velocity: {}", m.note_number(), m.velocity());
}
channel_voice2::ChannelVoice2::NoteOff(m) => {
println!("Note Off! note: {}, velocity: {}", m.note_number(), m.velocity());
}
_ => {}
}
}
Ok(UmpMessage::Sysex7(m)) => {
println!(
"Sysex 7bit: payload: {:?}",
m.payload().collect::<Vec<u7>>()
);
}
Ok(UmpMessage::FlexData(m)) => {
use midi2::flex_data::FlexDataMessage;
println!("FlexData: bank: {:?}", m.bank());
match m {
_ => {}, // further matching on different flex data types
}
}
// further matching on other message types
Err(e) => {
println!("Error parsing ump buffer: {:?}", e);
}
_ => {}
}
}
Sysex message can be represented with MIDI 2.0 Universal Message Packets.
use midi2::prelude::*;
let mut message = sysex7::Sysex7::<Vec<u32>>::new();
message.set_payload((0u8..30u8).map(u7::new));
message.set_group(u4::new(0xA));
assert_eq!(
message.data(),
&[
0x3A16_0001,
0x0203_0405,
0x3A26_0607,
0x0809_0A0B,
0x3A26_0C0D,
0x0E0F_1011,
0x3A26_1213,
0x1415_1617,
0x3A36_1819,
0x1A1B_1C1D,
],
);
Or with classical MIDI 2.0 byte streams.
use midi2::prelude::*;
let mut message = sysex7::Sysex7::<Vec<u8>>::new();
message.set_payload((0u8..30u8).map(u7::new));
assert_eq!(
message.data(),
&[
0xF0, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C,
0x0D, 0x0E, 0x0F, 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1A,
0x1B, 0x1C, 0x1D, 0xF7,
],
);
#![no_std]
is a first class use case in midi2.
All message types can be read and written without allocation,
even messages of arbitrary length, like sysex or flex-data.
You'll want to setup midi2 without default features to compile
without the std
feature.
midi2 = { version = "0.6.1", default-features = false, features = ["channel-voice2", "sysex7"], }
All messages are generic over their representation. For example, a simple non-allocating use case would be to represent messages within a fixed size array.
use midi2::prelude::*;
let mut message = sysex8::Sysex8::<[u32; 16]>::new();
// in this mode methods which would require a
// buffer resize are fallible
assert_eq!(message.try_set_payload(0..50), Ok(()));
// if there's not enough room in the buffer to
// accommodate the resize then an overflow error is returned.
assert_eq!(message.try_set_payload(0..60), Err(midi2::error::BufferOverflow));
A more advanced use case might be to make a custom buffer which uses an arena allocater to back your messages. See the [buffer] docs for more info.
When reading messages from an existing buffer, the message wrappers
own a borrowed reference to the data, so no copying or allocation takes place.
In this case the generic message buffer type is &[u32]
.
use midi2::prelude::*;
let buffer = [
0xD050_0100_u32,
0x4469_6769,
0x7461_6C20,
0x4175_6469,
0xD090_0100,
0x6F20_576F,
0x726B_7374,
0x6174_696F,
0xD0D0_0100,
0x6E20_2D20,
0x4441_5733,
0x362D_3136,
];
let message = UmpMessage::try_from(&buffer[..]).expect("Valid data");
Of course this means that such borrowed messages are immutable and also have their lifetimes tied to the original buffer.
To remedy this messages can be rebuffered
into a different
generic backing buffer type.
use midi2::{
prelude::*,
channel_voice2::NoteOn,
};
let mut owned: NoteOn::<[u32; 4]> = {
let buffer = [0x4898_5E03_u32, 0x6A14_E98A];
// the borrowed message is immutable and cannot outlive `buffer`
let borrowed = NoteOn::try_from(&buffer[..]).expect("Data is valid");
borrowed.rebuffer_into()
};
// the owned message is mutable and liberated from the buffer lifetime.
owned.set_channel(u4::new(0x9));
assert_eq!(owned.data(), &[0x4899_5E03, 0x6A14_E98A])
Messages which can be represented in classical MIDI byte stream format are also supported.
To do this simply use a backing buffer over u8
instead of u32
! ✨🎩
use midi2::prelude::*;
let mut message = channel_voice1::ChannelPressure::<[u8; 3]>::new();
message.set_channel(u4::new(0x6));
message.set_pressure(u7::new(0x09));
assert_eq!(message.data(), &[0xD6, 0x09]);
Messages represented in bytes can be transformed to ump and back using conversion traits.
use midi2::{
prelude::*,
channel_voice1::ChannelPressure,
};
let message = ChannelPressure::<[u8; 3]>::new();
let message: ChannelPressure<[u32; 4]> = message.into_ump();
assert_eq!(message.data(), &[0x20D0_0000]);
Several compile-time features are provided that you can enable or disable to customize functionality according to your needs.
Here's a list of available features:
-
default
:- std - Include [buffer] integration for
std::vec::Vec
and enable allocating getters for values which returnstd::string::String
values. - channel-voice2 — Include message wrappers for the MIDI 2.0 channel voice message type.
- sysex7 — Include message wrappers for the MIDI 7bit system exclusive message type.
- ci — 🚧 WIP 🚧
- std - Include [buffer] integration for
-
optional
: These features are not enabled by default and can be included by adding them to yourCargo.toml
.- flex-data - Include message wrappers for the MIDI 2.0 Flex Data message type.
- channel-voice1 - Include message wrappers for the classical MIDI channel voice message type.
- sysex8 - Include message wrappers for the MIDI 2.0 System Exclusive 8bit message type.
- system-common - Include message wrappers for the MIDI 2.0 System Common / System Real Time message type.
- ump-stream - Include message wrappers for the MIDI 2.0 Ump Stream message type.