SAT.js is a simple JavaScript library for performing collision detection (and projection-based collision response) of simple 2D shapes. It uses the Separating Axis Theorem (hence the name)
It supports detecting collisions between:
- Circles (using Voronoi Regions.)
- Convex Polygons (and simple Axis-Aligned Boxes, which are of course, convex polygons.)
It also supports checking whether a point is inside a circle or polygon.
It's released under the MIT license.
Current version: 0.5.0. Annotated source code is available.
Nicely compresses with the Google Closure Compiler in Advanced mode to about 6KB (2KB gzipped)
To use it in node.js, you can run npm install sat and then use it with var SAT = require('sat');
SAT.js contains the following JavaScript classes:
This is a simple 2D vector/point class. It is created by calling:
// Create the vector (10,10) - If (x,y) not specified, defaults to (0,0).
var v = new SAT.Vector(10, 10)It has the following properties:
x- The x-coordinate of the Vector.y- The y-coordinate of the Vector.
It contains the following methods:
copy(other)- Copy the value of another Vector to this one.clone()- Return a new vector with the same coordinates as this one.perp()- Change this vector to be perpendicular to what it was before.rotate(angle)- Rotate this vector counter-clockwise by the specified number of radians.reverse()- Reverse this Vector.normalize()- Make the Vector unit-lengthed.add(other)- Add another Vector to this one.sub(other)- Subtract another Vector from this one.scale(x,y)- Scale this Vector in the X and Y directions.project(other)- Project this Vector onto another one.projectN(other)- Project this Vector onto a unit Vector.reflect(axis)- Reflect this Vector on an arbitrary axis Vector.reflectN(axis)- Reflect this Vector on an arbitrary axis unit Vector.dot(other)- Get the dot product of this Vector and another.len2()- Get the length squared of this Vector.len()- Get the length of this Vector
This is a simple circle with a center position and a radius. It is created by calling:
// Create a circle whose center is (10,10) with radius of 20
var c = new SAT.Circle(new SAT.Vector(10,10), 20);It has the following properties:
pos- A Vector representing the center of the circle.r- The radius of the circle
This is a convex polygon, whose points are specified in a counter-clockwise fashion. It is created by calling:
// Create a triangle at (0,0)
var p = new SAT.Polygon(new SAT.Vector(), [
new SAT.Vector(),
new SAT.Vector(100,0),
new SAT.Vector(50,75)
]);Note: The points are counter-clockwise with respect to the coordinate system. If you directly draw the points on a screen that has the origin at the top-left corner it will appear visually that the points are being specified clockwise. This is just because of the inversion of the Y-axis when being displayed.
You can create a line segment by creating a Polygon that contains only 2 ppoints.
It has the following properties:
pos- The position of the polygon (all points are relative to this).points- Array of vectors representing the original points of the polygon.angle- Angle to rotate the polgon (affectscalcPoints)offset- Translation to apply to the polygon before theanglerotation (affectscalcPoints)calcPoints- (Calculated) The collision polygon - effectivelypointswithangleandoffsetapplied.edges- (Calculated) Array of Vectors representing the edges of the calculated polygonnormals- (Calculated) Array of Vectors representing the edge normals of the calculated polygon (perpendiculars)
You should not manually change any of the properties except pos - use the setPoints, setAngle, and setOffset methods to ensure that the calculated properties are updated correctly.
It has the following methods:
setPoints(points)- Set the original pointssetAngle(angle)- Set the current rotation angle (in radians)setOffset(offset)- Set the current offsetrotate(angle)- Rotate the original points of this polygon counter-clockwise (around its local coordinate system) by the specified number of radians. Theanglerotation will be applied on top of this rotation.translate(x, y)- Translate the original points of this polygon (relative to the local coordinate system) by the specified amounts. Theoffsettranslation will be applied on top of this translation.
This is a simple Box with a position, width, and height. It is created by calling:
// Create a box at (10,10) with width 20 and height 40.
var b = new SAT.Box(new SAT.Vector(10,10), 20, 40);It has the following properties:
pos- The bottom-left coordinate of the box (i.e the smallestxvalue and the smallestyvalue).w- The width of the box.h- The height of the box.
It has the following methods:
toPolygon()- Returns a new Polygon whose edges are the edges of the box.
This is the object representing the result of a collision between two objects. It just has a simple new Response() constructor.
It has the following properties:
a- The first object in the collision.b- The second object in the collison.overlap- Magnitude of the overlap on the shortest colliding axis.overlapN- The shortest colliding axis (unit-vector)overlapV- The overlap vector (i.e.overlapN.scale(overlap, overlap)). If this vector is subtracted from the position ofa,aandbwill no longer be colliding.aInB- Whether the first object is completely inside the second.bInA- Whether the second object is completely inside the first.
It has the following methods:
clear()- Clear the response so that it is ready to be reused for another collision test.
SAT.js contains the following collision tests:
Checks whether a given point is inside the specified circle.
Checks whether a given point is inside a specified convex polygon.
Tests for a collision between two Circles, a, and b. If a response is to be calculated in the event of collision, pass in a cleared Response object.
Returns true if the circles collide, false otherwise.
Tests for a collision between a Polygon and a Circle. If a response is to be calculated in the event of a collision, pass in a cleared Response object.
Returns true if there is a collision, false otherwise.
The same thing as SAT.testPolygonCircle, but in the other direction.
Returns true if there is a collision, false otherwise.
NOTE: This is slightly slower than SAT.testPolygonCircle as it just calls that and reverses the result
Tests whether two polygons a and b collide. If a response is to be calculated in the event of collision, pass in a cleared Response object.
Returns true if there is a collision, false otherwise.
NOTE: If you want to detect a collision between Boxes, use the toPolygon() method
Test two circles
var V = SAT.Vector;
var C = SAT.Circle;
var circle1 = new C(new V(0,0), 20);
var circle2 = new C(new V(30,0), 20);
var response = new SAT.Response();
var collided = SAT.testCircleCircle(circle1, circle2, response);
// collided => true
// response.overlap => 10
// response.overlapV => (10, 0)Test a circle and a polygon
var V = SAT.Vector;
var C = SAT.Circle;
var P = SAT.Polygon;
var circle = new C(new V(50,50), 20);
// A square
var polygon = new P(new V(0,0), [
new V(0,0), new V(40,0), new V(40,40), new V(0,40)
]);
var response = new SAT.Response();
var collided = SAT.testPolygonCircle(polygon, circle, response);
// collided => true
// response.overlap ~> 5.86
// response.overlapV ~> (4.14, 4.14) - i.e. on a diagonalTest two polygons
var V = SAT.Vector;
var P = SAT.Polygon;
// A square
var polygon1 = new P(new V(0,0), [
new V(0,0), new V(40,0), new V(40,40), new V(0,40)
]);
// A triangle
var polygon2 = new P(new V(30,0), [
new V(0,0), new V(30, 0), new V(0, 30)
]);
var response = new SAT.Response();
var collided = SAT.testPolygonPolygon(polygon1, polygon2, response);
// collided => true
// response.overlap => 10
// response.overlapV => (10, 0)No collision between two Boxes
var V = SAT.Vector;
var B = SAT.Box;
var box1 = new B(new V(0,0), 20, 20).toPolygon();
var box2 = new B(new V(100,100), 20, 20).toPolygon();
var collided = SAT.testPolygonPolygon(box1, box2);
// collided => falseHit testing a circle and polygon
var V = SAT.Vector;
var C = SAT.Circle;
var P = SAT.Polygon;
var triangle = new P(new V(30,0), [
new V(0,0), new V(30, 0), new V(0, 30)
]);
var circle = new C(new V(100,100), 20);
SAT.pointInPolygon(new V(0,0), triangle); // false
SAT.pointInPolygon(new V(35, 5), triangle); // true
SAT.pointInCircle(new V(0,0), circle); // false
SAT.pointInCircle(new V(110,110), circle); // trueTo run the tests from your console:
mocha
To install mocha you will need to have run npm install after cloning the repo.