Bettapro/Solar-Tracer-Blynk-V3

Issues

• Configurable update interval

  #84 opened 9 months ago by Bettapro
  0

• Energy Consumed by day / week / month

  #83 opened 9 months ago by Bettapro
  0

• MPPT Configuration

  #80 opened 10 months ago by nicopace
  2

• circular_queue.h: No such file or directory, after EspSoftwareSerial upgrade to 8.2.0

  #81 opened 10 months ago by grz3chu
  2

• Config topic name in ap mide

  #78 opened a year ago by Bettapro
  0

• MQTT PW Length is Limited to 15 Characters

  #73 opened a year ago by MidnightLink
  3

• Home Assistant Energy Dashboard - Long-term Statistics

  #74 opened a year ago by MidnightLink
  5

• Web Server after Wifi connection unavailable

  #72 opened a year ago by MidnightLink
  2

• Duplicate unique IDs and sensor name using multiple device sensor on mqttHA

  #66 opened a year ago by ntah
  4

• The function of the firmware .bin with the swser version

  #69 opened a year ago by ahn254
  0

• "Regarding ESP8266 D1 mini, I cannot find the 'SolarTracerAP' Wi-Fi access point when flashing the firmware."

  #67 opened a year ago by ahn254
  3

• Was it possible to have it work with epever Upower

  #65 opened a year ago by patmtp35
  1

• Explicit library requirement

  #48 opened 3 years ago by Bettapro
  0

• Check mqtt credentials

  #53 opened 2 years ago by Bettapro
  1

• Can't add device to blynk using the QR Code

  #58 opened 2 years ago by Xento
  0

• Blynk 2.0 support

  #26 opened 3 years ago by Bettapro
  4

• Arduino/ATmega

  #17 opened 2 years ago by Bettapro
  1

• Swapping the minimum and maximum PV_VOLTAGE_TODAY

  #54 opened 2 years ago by theaudio
  2

• esp32 mqttHA.bin web not loading

  #51 opened 2 years ago by blackbrayn
  0

• Value not sync at boot in HA

  #50 opened 3 years ago by Bettapro
  0

• ESP8266 - Status 19

  #49 opened 3 years ago by Bettapro
  0

• New WIFI settings

  #22 opened 3 years ago by Bettapro
  0

• solar PV status, device SCC status and battery control parameter

  #31 opened 3 years ago by mr12obot
  5

• Fix clone project v3 from qrcode

  #43 opened 3 years ago by Bettapro
  0

• Manual time sync

  #21 opened 3 years ago by Bettapro
  0

• Expose modbus timeout

  #33 opened 3 years ago by Bettapro
  2

• mqtt support

  #19 opened 3 years ago by Bettapro
  5

• Some RT and ST variables are not ready and not synced!

  #28 opened 3 years ago by mr12obot
  18

• Multiple Solar Tracer

  #37 opened 3 years ago by mr12obot
  0

• Synchronization error on syncAll while booting

  #36 opened 3 years ago by Bettapro
  0

• Function of vPIN_INTERNAL_STATUS and vPIN_CHARGE_DEVICE_ENABLED

  #34 opened 3 years ago by mr12obot
  0

• Debug message over blynk

  #23 opened 3 years ago by Bettapro
  1

• Solar charge controller connection test

  #29 opened 3 years ago by Bettapro
  1

• Expose modbus error code

  #32 opened 3 years ago by Bettapro
  1

• Mapping ethernet cable to Modbus- COLOR ISSUE

  #27 opened 3 years ago by Bettapro
  1

• debug messages using terminal widget blynk app

  #30 opened 3 years ago by mr12obot
  2

• error some identifier and function is undefined/unused

  #24 opened 3 years ago by mr12obot
  5

• Load parameters configuration

  #20 opened 3 years ago by Bettapro
  0

• Wifi manager doc

  #18 opened 3 years ago by Bettapro
  1

• Configuration over Web

  #5 opened 3 years ago by Bettapro
  0

• Configuration over FS

  #10 opened 3 years ago by Bettapro
  0

• Documentation

  #9 opened 3 years ago by Bettapro
  0

• Ubidots supports

  #15 opened 3 years ago by Bettapro
  1

• Licensing

  #14 opened 3 years ago by Bettapro
  0

• Virtual pin to request full update

  #16 opened 3 years ago by Bettapro
  1

• Code review

  #12 opened 3 years ago by Bettapro
  0

• Verify ARDUINO IDE comp

  #11 opened 3 years ago by Bettapro
  1

• Optional status LED

  #7 opened 3 years ago by Bettapro
  1

• Move to BlynkTimer

  #8 opened 3 years ago by Bettapro
  0

• Avoid empty parameters sync

  #6 opened 3 years ago by Bettapro
  0