Blanc-dot/AudioDeviceCmdlets

AudioDeviceCmdlets is a suite of PowerShell Cmdlets to control audio devices on Windows

Installation

Run as administrator (powershell)

Install-Module -Name AudioDeviceCmdlets

Grab the Added File

DefaultCommunicationDevice.ps1 - is a file used to look for Line 1 Virtual Audio Cable by Muzychenko and set it as the default communication device, this is ideal for using AI based Voice Changers.

You can use the Get-AudioDevice -List command to find the actual name of your device that you want to set as default communications (for recording) and replace the name with that.

Then you can create a task scheduler task that calls "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" with the argument being "Path\To\DefaultCommunicationDevice.ps1" without the ""'s on both spots. Change the trigger to be at log on, delay task for, "2 minutes" which you manually type. You should not need to run it with highest privileges, but try it by running the task, if it doesn't, check that box, make sure the task is configured for Windows 10 as well.

Lastly

This repo will not be updated, go to the official repo to see if any updates have happened, the only thing I use this for is setting my audio device on boot, nothing more nothing less.

Description

AudioDeviceCmdlets is a suite of PowerShell Cmdlets to control audio devices on Windows

Features

Get list of all audio devices
Get default audio device (playback/recording)
Get default communication audio device (playback/recording)
Get volume and mute state of default audio device (playback/recording)
Get volume and mute state of default communication audio device (playback/recording)
Set default audio device (playback/recording)
Set default communication audio device (playback/recording)
Set volume and mute state of default audio device (playback/recording)
Set volume and mute state of default communication audio device (playback/recording)

Usage

Get-AudioDevice -ID <string>			# Get the device with the ID corresponding to the given <string>
Get-AudioDevice -Index <int>			# Get the device with the Index corresponding to the given <int>
Get-AudioDevice -List				# Get a list of all enabled devices as <AudioDevice>
Get-AudioDevice -PlaybackCommunication		# Get the default communication playback device as <AudioDevice>
Get-AudioDevice -PlaybackCommunicationMute	# Get the default communication playback device's mute state as <bool>
Get-AudioDevice -PlaybackCommunicationVolume	# Get the default communication playback device's volume level on 100 as <float>
Get-AudioDevice	-Playback			# Get the default playback device as <AudioDevice>
Get-AudioDevice -PlaybackMute			# Get the default playback device's mute state as <bool>
Get-AudioDevice -PlaybackVolume			# Get the default playback device's volume level on 100 as <float>
Get-AudioDevice -RecordingCommunication		# Get the default communication recording device as <AudioDevice>
Get-AudioDevice -RecordingCommunicationMute	# Get the default communication recording device's mute state as <bool>
Get-AudioDevice -RecordingCommunicationVolume	# Get the default communication recording device's volume level on 100 as <float>
Get-AudioDevice -Recording			# Get the default recording device as <AudioDevice>
Get-AudioDevice -RecordingMute			# Get the default recording device's mute state as <bool>
Get-AudioDevice -RecordingVolume		# Get the default recording device's volume level on 100 as <float>

Set-AudioDevice	<AudioDevice>				# Set the given playback/recording device as both the default device and the default communication device, for its type
Set-AudioDevice <AudioDevice> -CommunicationOnly	# Set the given playback/recording device as the default communication device and not the default device, for its type
Set-AudioDevice <AudioDevice> -DefaultOnly		# Set the given playback/recording device as the default device and not the default communication device, for its type
Set-AudioDevice -ID <string>				# Set the device with the ID corresponding to the given <string> as both the default device and the default communication device, for its type
Set-AudioDevice -ID <string> -CommunicationOnly		# Set the device with the ID corresponding to the given <string> as the default communication device and not the default device, for its type
Set-AudioDevice -ID <string> -DefaultOnly		# Set the device with the ID corresponding to the given <string> as the default device and not the default communication device, for its type
Set-AudioDevice -Index <int>				# Set the device with the Index corresponding to the given <int> as both the default device and the default communication device, for its type
Set-AudioDevice -Index <int> -CommunicationOnly		# Set the device with the Index corresponding to the given <int> as the default communication device and not the default device, for its type
Set-AudioDevice -Index <int> -DefaultOnly		# Set the device with the Index corresponding to the given <int> as the default device and not the default communication device, for its type
Set-AudioDevice -PlaybackCommunicationMuteToggle	# Set the default communication playback device's mute state to the opposite of its current mute state
Set-AudioDevice -PlaybackCommunicationMute <bool>	# Set the default communication playback device's mute state to the given <bool>
Set-AudioDevice -PlaybackCommunicationVolume <float>	# Set the default communication playback device's volume level on 100 to the given <float>
Set-AudioDevice -PlaybackMuteToggle			# Set the default playback device's mute state to the opposite of its current mute state
Set-AudioDevice -PlaybackMute <bool>			# Set the default playback device's mute state to the given <bool>
Set-AudioDevice -PlaybackVolume <float>			# Set the default playback device's volume level on 100 to the given <float>
Set-AudioDevice -RecordingCommunicationMuteToggle	# Set the default communication recording device's mute state to the opposite of its current mute state
Set-AudioDevice -RecordingCommunicationMute <bool>	# Set the default communication recording device's mute state to the given <bool>
Set-AudioDevice -RecordingCommunicationVolume <float>	# Set the default communication recording device's volume level on 100 to the given <float>
Set-AudioDevice -RecordingMuteToggle			# Set the default recording device's mute state to the opposite of its current mute state
Set-AudioDevice -RecordingMute <bool>			# Set the default recording device's mute state to the given <bool>
Set-AudioDevice -RecordingVolume <float>		# Set the default recording device's volume level on 100 to the given <float>

Write-AudioDevice -PlaybackCommunicationMeter	# Write the default playback device's power output on 100 as a meter
Write-AudioDevice -PlaybackCommunicationStream	# Write the default playback device's power output on 100 as a stream of <int>
Write-AudioDevice -PlaybackMeter		# Write the default playback device's power output on 100 as a meter
Write-AudioDevice -PlaybackStream		# Write the default playback device's power output on 100 as a stream of <int>
Write-AudioDevice -RecordingCommunicationMeter	# Write the default recording device's power output on 100 as a meter
Write-AudioDevice -RecordingCommunicationStream	# Write the default recording device's power output on 100 as a stream of <int>
Write-AudioDevice -RecordingMeter		# Write the default recording device's power output on 100 as a meter
Write-AudioDevice -RecordingStream		# Write the default recording device's power output on 100 as a stream of <int>

Build Cmdlet from source

Build instructions

1. Install Visual Studio 2022

    Workloads: .NET desktop development
   

2. Create new project from SOURCE folder
   File -> New -> Project From Existing Code...

    Type of project: Visual C#
    Folder: SOURCE
    Name: AudioDeviceCmdlets
    Output type: Class Library
   

3. Set project properties
   Project -> AudioDeviceCmdlets Properties

    Assembly name: AudioDeviceCmdlets
    Target framework: .NET Framework 4.6.1+
   

4. Install System.Management.Automation NuGet legacy package
   Project -> Manage NuGet Packages...

    Package source: nuget.org
    Browse: Microsoft.PowerShell.5.1.ReferenceAssemblies
    Install: v1.0.0+
   

5. Set solution configuration
   Build -> Configuration Manager...

    Active solution configuration: Release
   

6. Build Cmdlet
   Build -> Build Solution

    AudioDeviceCmdlets\SOURCE\bin\Release\AudioDeviceCmdlets.dll
   

7. Import Cmdlet to PowerShell on Windows

   $FilePath = "C:\Path\To\AudioDeviceCmdlets\SOURCE\bin\Release\AudioDeviceCmdlets.dll"
   New-Item "$($profile | split-path)\Modules\AudioDeviceCmdlets" -Type directory -Force
   Copy-Item $FilePath "$($profile | split-path)\Modules\AudioDeviceCmdlets\AudioDeviceCmdlets.dll"
   Set-Location "$($profile | Split-Path)\Modules\AudioDeviceCmdlets"
   Get-ChildItem | Unblock-File
   Import-Module AudioDeviceCmdlets

Donation

Thank you for considering a donation

Bitcoin		(BTC) 3AffczXX4Jb2iN8QWQhHQAsj9AqGFXgYUF
BitcoinCash	(BCH) qraf6a3fklta7xkvwkh49zqn6mgnm2eyz589rkfvl3
Ethereum	(ETH) 0xE4EA2A2356C04c8054Db452dCBd6f958F74722dE

Attribution

Based on code originally posted to Code Project by Ray Molenkamp with comments and suggestions by MadMidi
http://www.codeproject.com/Articles/18520/Vista-Core-Audio-API-Master-Volume-Control
Based on code originally posted to GitHub by Chris Hunt
https://github.com/cdhunt/WindowsAudioDevice-Powershell-Cmdlet