/bitcoin-kit-ios

Full Bitcoin library for iOS, implemented on Swift. SPV wallet implementation for Bitcoin, Bitcoin Cash and Dash blockchains.

Primary LanguageSwiftMIT LicenseMIT

BitcoinKit-iOS

Bitcoin, BitcoinCash(ABC) and Dash wallet toolkit for Swift. This is a full implementation of SPV node including wallet creation/restore, synchronization with network, send/receive transactions, and more. The repository includes the main BitcoinCore.swift and BitcoinKit.swift, BitcoinCashKit.swift and DashKit.swift separate pods.

Features

  • Full SPV implementation for fast mobile performance
  • Send/Receive Legacy transactions (P2PKH, P2PK, P2SH)
  • BIP32 hierarchical deterministic wallets implementation.
  • BIP39 mnemonic code for generating deterministic keys.
  • BIP44 multi-account hierarchy for deterministic wallets.
  • BIP21 URI schemes, which include payment address, amount, label and other params

BitcoinKit.swift

  • Send/Receive Segwit transactions (P2WPKH)
  • Send/Receive Segwit transactions compatible with legacy wallets (P2WPKH-SH)
  • base58, bech32

BitcoinCashKit.swift

  • bech32 cashaddr addresses

DashKit.swfit

  • Instant send
  • LLMQ lock, Masternodes validation

Usage

On this page, we'll use Kits to refer to one of BitcoinKit.swift, BitcoinCashKit.swift and DashKit.swift kits.

Initialization

Kits requires you to provide mnemonic phrase when it is initialized:

let words = ["word1", ... , "word12"]

Bitcoin

let bitcoinKit = BitcoinKit(withWords: words, walletId: "bitcoin-wallet-id", syncMode: .api, networkType: .mainNet)

Bitcoin Cash

let bitcoinCashKit = BitcoinCashKit(withWords: words, walletId: "bitcoin-cash-wallet-id", syncMode: .api, networkType: .mainNet)

Dash

let dashKit = DashKit(withWords: words, walletId: "dash-wallet-id", syncMode: .api, networkType: .mainNet)

All 3 Kits can be configured to work in .mainNet or .testNet.

sycMode paramater

Kits can restore existing wallet or create a new one. When restoring, it generates addresses for given wallet according to bip44 protocol, then it pulls all historical transactions for each of those addresses. This is done only once on initial sync. syncMode parameter defines where it pulls historical transactions from. When they are pulled, it continues to sync according to SPV protocol no matter which syncMode was used for initial sync. There are 3 modes available:

  • .full: Fully synchronizes from peer-to-peer network starting from the block when bip44 was introduced. This mode is the most private (since it fully complies with SPV protocol), but it takes approximately 2 hours to sync upto now (June 10, 2019).
  • .api: Transactions before checkpoint are pulled from API(currently Insight API or BcoinAPI). Then the rest is synchronized from peer-to-peer network. This is the fastest one, but it's possible for an attacker to learn which addresses you own. Checkpoints are updated with each new release and hardcoded so the blocks validation is not broken.
  • .newWallet: No need to pull transactions.
Additional parameters:
  • confirmationsThreshold: Minimum number of confirmations required for an unspent output in incoming transaction to be spent (default: 6)
  • minLogLevel: Can be configured for debug purposes if required.

Starting and Stopping

Kits require to be started with start command. It will be in synced state as long as it is possible. You can call stop to stop it

bitcoinKit.start()
bitcoinKit.stop()

Getting wallet data

Kits hold all kinds of data obtained from and needed for working with blockchain network

Current Balance

Balance is provided in Satoshi:

bitcoinKit.balance

// 2937096768

Last Block Info

Last block info contains headerHash, height and timestamp that can be used for displaying sync info to user:

bitcoinKit.lastBlockInfo 

// ▿ Optional<BlockInfo>
//  ▿ some : BlockInfo
//    - headerHash : //"00000000000041ae2164b486398415cca902a41214cad72291ee04b212bed4c4"
//    - height : 1446751
//    ▿ timestamp : Optional<Int>
//      - some : 1544097931

Receive Address

Get an address which you can receive coins to. Receive address is changed each time after you actually get a transaction in which you receive coins to that address

bitcoinKit.receiveAddress

// "mgv1KTzGZby57K5EngZVaPdPtphPmEWjiS"

Transactions

Kits have transactions(fromHash: nil, limit: nil) methods which return Single<TransactionInfo>(for BitcoinKit and BitcoinCashKit) and Single<DashTransactionInfo>(for DashKit) RX Single Observers.

TransactionInfo:

//   ▿ TransactionInfo
//     - transactionHash : "0f83c9b330f936dc4a2458b7d3bb06dce6647a521bf6d98f9c9d3cdd5f6d2a73"
//     - transactionIndex : 500000
//     ▿ from : 2 elements
//       ▿ 0 : TransactionAddressInfo
//         - address : "mft8jpnf3XwwqhaYSYMSXePFN85mGU4oBd"
//         - mine : true
//       ▿ 1 : TransactionAddressInfo
//         - address : "mnNS5LEQDnYC2xqT12MnQmcuSvhfpem8gt"
//         - mine : true
//     ▿ to : 2 elements
//       ▿ 0 : TransactionAddressInfo
//         - address : "n43efNftHQ1cXYMZK4Dc53wgR6XgzZHGjs"
//         - mine : false
//       ▿ 1 : TransactionAddressInfo
//         - address : "mrjQyzbX9SiJxRC2mQhT4LvxFEmt9KEeRY"
//         - mine : true
//     - amount : -800378
//     ▿ blockHeight : Optional<Int>
//       - some : 1446602
//    ▿ timestamp : Optional<Int>
//       - some : 1543995972

DashTransactionInfo:

//   ▿ DashTransactionInfo
//     - transactionHash : "0f83c9b330f936dc4a2458b7d3bb06dce6647a521bf6d98f9c9d3cdd5f6d2a73"
//     - transactionIndex : 500000
//     - instantTx : true
//     ▿ from : 2 elements
//       ▿ 0 : TransactionAddressInfo
//         - address : "mft8jpnf3XwwqhaYSYMSXePFN85mGU4oBd"
//         - mine : true
//       ▿ 1 : TransactionAddressInfo
//         - address : "mnNS5LEQDnYC2xqT12MnQmcuSvhfpem8gt"
//         - mine : true
//     ▿ to : 2 elements
//       ▿ 0 : TransactionAddressInfo
//         - address : "n43efNftHQ1cXYMZK4Dc53wgR6XgzZHGjs"
//         - mine : false
//       ▿ 1 : TransactionAddressInfo
//         - address : "mrjQyzbX9SiJxRC2mQhT4LvxFEmt9KEeRY"
//         - mine : true
//     - amount : -800378
//     ▿ blockHeight : Optional<Int>
//       - some : 1446602
//    ▿ timestamp : Optional<Int>
//       - some : 1543995972

Creating new transaction

In order to create new transaction, call send(to: String, value: Int, feeRate: Int) method on Kits

try bitcoinKit.send(to: "mrjQyzbX9SiJxRC2mQhT4LvxFEmt9KEeRY", value: 1000000, feeRate: 10000)

This first validates a given address and amount, creates new transaction, then sends it over the peers network. If there's any error with given address/amount or network, it raises an exception.

Validating transaction before send

One can validate address and fee by using following methods:

try bitcoinKit.validate(address: "mrjQyzbX9SiJxRC2mQhT4LvxFEmt9KEeRY")
try bitcoinKit.fee(for: 1000000, toAddress: "mrjQyzbX9SiJxRC2mQhT4LvxFEmt9KEeRY", senderPay: true, feeRate: 10000)

senderPay parameter defines who pays the fee

Parsing BIP21 URI

You can use parse method to parse a BIP21 URI:

bitcoinKit.parse(paymentAddress: "bitcoin:175tWpb8K1S7NmH4Zx6rewF9WQrcZv245W?amount=50&label=Luke-Jr&message=Donation%20for%20project%20xyz")

// ▿ BitcoinPaymentData
//   - address : "175tWpb8K1S7NmH4Zx6rewF9WQrcZv245W"
//   - version : nil
//   ▿ amount : Optional<Double>
//     - some : 50.0
//   ▿ label : Optional<String>
//     - some : "Luke-Jr"
//   ▿ message : Optional<String>
//     - some : "Donation for project xyz"
//   - parameters : nil

Subscribing to BitcoinKit data

Kits provide with data like transactions, blocks, balance, kits state in real-time. BitcoinCoreDelegate protocol must be implemented and set to Kits instance to receive that data.

class Manager {

	init(words: [String]) {
		bitcoinKit = BitcoinKit(withWords: words, walletId: "bitcoin-wallet-id")
        bitcoinKit.delegate = self
    }

}

extension Manager: BitcoinCoreDelegate {

    func transactionsUpdated(inserted: [TransactionInfo], updated: [TransactionInfo]) {
    }

    func transactionsDeleted(hashes: [String]) {
    }

    func balanceUpdated(balance: Int) {
    }

    func lastBlockInfoUpdated(lastBlockInfo: BlockInfo) {
    }

    public func kitStateUpdated(state: BitcoinCore.KitState) {
		// BitcoinCore.KitState can be one of 3 following states:
		// .synced
		// .syncing(progress: Double)
		// .notSynced
		// 
		// These states can be used to implement progress bar, etc
    }
    
}

Listener events are run in a dedicated background thread. It can be switched to main thread by setting the delegateQueue property to DispatchQueue.main

bitcoinKit.delegateQueue = DispatchQueue.main

Prerequisites

  • Xcode 10.0+
  • Swift 5+
  • iOS 11+

Installation

CocoaPods

CocoaPods is a dependency manager for Cocoa projects. You can install it with the following command:

$ gem install cocoapods

CocoaPods 1.5.0+ is required to build BitcoinKit.

To integrate BitcoinKit into your Xcode project using CocoaPods, specify it in your Podfile:

source 'https://github.com/CocoaPods/Specs.git'
platform :ios, '10.0'
use_frameworks!

target '<Your Target Name>' do
  pod 'BitcoinCore.swift'
  pod 'BitcoinKit.swift'
  pod 'BitcoinCashKit.swift'
  pod 'DashKit.swift'
end

Then, run the following command:

$ pod install

Example Project

All features of the library are used in example project. It can be referred as a starting point for usage of the library.

Dependencies

  • HSHDWalletKit - HD Wallet related features, mnemonic phrase geneartion.
  • HSCryptoKit - Crypto functions required for working with blockchain.

Dash dependencies

License

The BitcoinKit-iOS toolkit is open source and available under the terms of the MIT License.