/LYWSD02-home-assistant

Home-Assistant sensor for LYWSD02 Thermometer

Primary LanguagePython

LYWSD02-home-assistant

Home-Assistant sensor for Xiaomi LYWSD02 Hygrometer Thermometer.

!WORK IN PROGRESS!

TODO: Add more documentation

Installation

  1. Copy custom_components/lywsd02 directory into custom_components inside your HA directory (typically, where configuration.yaml is placed).
  2. Add this block into configuration.yaml 
    lywsd02:
  mac: 3A:57:C8:89:70:BE
  sensor:
    - enabled: true
      name: 'My Thermometer'
    where mac property is you'r BT Thermometer mac address. See mitemp_bt docs for instructions.
  3. Update or create sensor templates (this step will be simplified in future) 
    sensor:
   - platform: template
    sensors:
        my_temp:
            friendly_name: "Entrance Temperature"
            value_template: "{{ states.sensor.my_thermometer.attributes.temperature }}"
            unit_of_measurement: 'ºC'
        my_humid:
            friendly_name: "Entrance Humidity"
            value_template: "{{ states.sensor.my_thermometer.attributes.humidity }}"
            unit_of_measurement: '%'
  4. Restart Home-Assistant

Available attributes

Name Type Units Description
tetemperature float °C Temperature measured value
humidity int % Relative Humidity measured value
battery_level int % Experimental Device battery level. I'm not sure that it gets correct
time str time string Current time displayed on device

pixel