Neptune2&2S&2D firmware file

ZNP-Robin-Nano-V1.2 & ZNP-Robin-Nano-V1.3

ZNP Robin Nano v1.2 & V1.3 is a powerful 32-bit 3D printer control board with STM32F103VET6. Support Marlin2.0. Support ZNP Robin TFT35 V1.0 touch Screens. The mainboard integrates 5 AXIS interface, hot bed, heating head, 3 NTC100K. Support Robin WIFI for cloud printing and supports firmware update by SD card…

About ZNP-Robin-Nano V1.2 & V1.3

The differences between ZNP Robin Nano V1.2 and ZNP Robin Nano V1.3 are as follow:

————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
                        ZNP Robin Nano V1.2                                   ZNP Robin Nano V1.3            
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
Firmware support        ZNP Robin Nano V1.2 Firmware/Above Marlin2.0.6        ZNP Robin Nano V1.3 Firmware/Above Marlin2.0.6    
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
LCD Type and Interface  ZNP Robin TFT35(FSMC)                                 ZNP Robin TFT35(FSMC)    
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
Rotary Encoder          Not support                                           Not support  
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
Motor Driver mode       STEP/DIR                                              STEP/DIR   
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
On board EEPROM         2KB                                                   4KB                          
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

Compare between ZNP Robin Nano V1.2 & V1.3

ITEMS	ZNP Robin Nano V1.2	ZNP Robin Nano V1.3
MCU	STM32F103VET6(72MHz)	STM32F407VET6（168MHz）
FLASH/RAM	512KB FLASH/64KB RAM	512KB FLASH/192KB RAM
Drivers	2 TMC2225 standard mode + 2 A4988 + 1 Pluggable	2 TMC2225 standard mode + 2 A4988 + 1 Pluggable
Firmware offset	7000	8000

Firmware version description

Please check the model version marked on the motherboard to confirm the motherboard model and the required firmware.

ZNP_Robin_Nano_V1.2 Firmware

V1.0.4

ZNP_Robin_Nano_V1.3 Firmware

V2.0.2

Note

Thank you for using ELEGOO products. If you have any questions during use, please contact us in time and we will work with you to solve it.

Bookworm-bit/ZNP-Robin-Nano-V1.2-V1.3