Pinned Repositories
3D_Printer_Files
DoorBuffer
Simple printable doorbuffer to claw back 20mm without upgrading the front frame to 2040
ESPHome-Configs
Config Backups
LoRa
ESPHome LoRa config
Nozzle-Offset-Calibration-Tool
Nozzle alignment tool for idex or changer 3d printers based on the idea from https://github.com/Life0fBrian/Brians-IDEX-Nozzle-Calibration-tool/tree/main
RadonEye-ESP32
StealthChanger
Spinoff from Viertuz Tapchanger https://github.com/viesturz/tapchanger
SV08
SV08 is a flying gantry Core-XY printer with a print area of 350x350x345mm, also a derivative work based on Voron V2.4. It aims to provide an alternative solution for 3D printing enthusiasts who are eager to use Voron V2.4 but are hindered by high costs and learning barriers. SV08 open source (including structure, hardware, and firmware) for users
VoronUsers
Voron Community mods, slicer profiles and firmware configurations.
OrcaSlicer
G-code generator for 3D printers (Bambu, Prusa, Voron, VzBot, RatRig, Creality, etc.)
BrewNinja's Repositories
BrewNinja/RadonEye-ESP32
BrewNinja/LoRa
ESPHome LoRa config
BrewNinja/Nozzle-Offset-Calibration-Tool
Nozzle alignment tool for idex or changer 3d printers based on the idea from https://github.com/Life0fBrian/Brians-IDEX-Nozzle-Calibration-tool/tree/main
BrewNinja/3D_Printer_Files
BrewNinja/DoorBuffer
Simple printable doorbuffer to claw back 20mm without upgrading the front frame to 2040
BrewNinja/ESPHome-Configs
Config Backups
BrewNinja/StealthChanger
Spinoff from Viertuz Tapchanger https://github.com/viesturz/tapchanger
BrewNinja/SV08
SV08 is a flying gantry Core-XY printer with a print area of 350x350x345mm, also a derivative work based on Voron V2.4. It aims to provide an alternative solution for 3D printing enthusiasts who are eager to use Voron V2.4 but are hindered by high costs and learning barriers. SV08 open source (including structure, hardware, and firmware) for users
BrewNinja/VoronUsers
Voron Community mods, slicer profiles and firmware configurations.