/sweyntooth_bluetooth_low_energy_attacks

Proof of Concept of Sweyntooth Bluetooth Low Energy (BLE) vulnerabilities.

Primary LanguagePython

SweynTooth - Unleashing Mayhem over Bluetooth Low Energy

This repository is part of a research outcome from the ASSET Research Group. attack_logo

SweynTooth captures a family of 18 vulnerabilities across different Bluetooth Low Energy (BLE) software development kits (SDKs) of six major system-on-a-chip (SoC) vendors. The vulnerabilities expose flaws in specific BLE SoC implementations that allow an attacker in radio range to trigger deadlocks, crashes and buffer overflows or completely bypass security depending on the circumstances. (Update) We have also included a testing script to check devices against the BLE KNOB variant.

You can check more information about the vulnerabilities, available patches and affected devices on ASSET Research Group SweynTooth disclosure website.

Fitbit, August Smart Lock, Eve Energy, CubiTag and other "Smart" things are affected.

Libraries included in this PoC

This PoC uses well maintained libraries such as Scapy and Colorama. The BLE packet crafting and dissection is done via customized Scapy protocol layers (bluetooth4LE and bluetooth.py). There's a merge in progress to include our additions in Scapy's main repository.

Getting Started (Installation)

First, you must make sure to have a Python2.7 on your system and the python packages listed on requirements.txt file. If you are using Ubuntu, run the following:

sudo apt-get install python2.7
sudo pip install -r requirements.txt

Secondly, SweynTooth uses the Nordic nRF52840 Dongle to send/receive raw link layer packets to and from the vulnerable peripheral over the air. It is necessary to flash the driver firmware to the board before starting the Python 2.7 scripts.

The binary of our firmware code is on the nRF52_driver_firmware.zip file. You need to install nrfutil tool to flash the firmware on the board. Remember to put the nRF52840 on DFU mode before flashing (reset the USB dongle while it is connected to your PC by pressing the small reset button).

dongle_reset_button

You can run the following commands to install the Python dependencies and to flash the firmware:

python -m pip install nrfutil pyserial pycryptodome
nrfutil dfu usb-serial -p COM_PORT -pkg nRF52_driver_firmware.zip

The scripts work on Linux or Windows. You just need to change the COM_PORT parameter to match the nRF52840 port name.

(Alternative nRF52 driver flashing method)

If the previous flashing method didn't work, you can also flash the firmware by using the nRF Connect App for Desktop, which gives a nice interface to flash the hex firmware (nRF52_driver_firmware.hex).

Running the proof of concept scripts

After the requirements are installed, you can run an exploit script by executing the following command:

python Telink_key_size_overflow.py COM7 A4:C1:38:D8:AD:A9

The first argument is the serial port name (generally /dev/ttyACM0 on Linux) and the second is the address of the vulnerable BLE device. You can use any BLE scanner or the nRF Connect App to discover such address.

Taking as example the Key Size Overflow vulnerability, the following output is given by the script if the vulnerable device hangs after the crash:

attack_logo

Docker image for Linux (optional)

If you wish to use SweynTooth via a docker image to avoid install Python dependencies, you can use the docker.sh helper script to build and run the docker instance or download the prebuild docker image (link) available on releases page. The usage of docker.sh is described below.

---------  HELP -------------
sudo ./docker run <script_name> <serial_port> <ble_target_address> - Start any sweyntooth script by its name (<script_name>)
sudo ./docker build                                                - Build docker container
sudo ./docker build release                                        - Build docker container and create compressed image for release
sudo ./docker shell                                                - Start docker container shell
---------- EXAMPLE ----------
./docker.sh run extras/Microchip_and_others_non_compliant_connection.py /dev/ttyACM0 f0:f8:f2:da:09:63

Available BLE exploits

Each exploit script corresponds to one flaw. The following summary table captures the correspondence between the vulnerability and a script to exploit the vulnerability on the affected SoCs.

Vulnerability CVE(s) Vendor Script file
Link Layer Length Overflow CVE-2019-16336
CVE-2019-17519
Cypress
NXP
link_layer_length_overflow.py
LLID Deadlock CVE-2019-17061
CVE-2019-17060
Cypress
NXP
llid_dealock.py
Truncated L2CAP CVE-2019-17517 Dialog DA14580_exploit_att_crash.py
Silent Length Overflow CVE-2019-17518 Dialog DA14680_exploit_silent_overflow.py
Public Key Crash CVE-2019-17520 Texas Instruments CC2640R2_public_key_crash.py
Invalid Connection Request CVE-2019-19193 Texas Instruments CC_connection_req_crash.py
Invalid L2CAP Fragment CVE-2019-19195 Microchip Microchip_invalid_lcap_fragment.py
Sequential ATT Deadlock CVE-2019-19192 STMicroelectronics sequential_att_deadlock.py
Key Size Overflow CVE-2019-19196 Telink Telink_key_size_overflow.py
Zero LTK Installation CVE-2019-19194 Telink Telink_zero_ltk_installation.py
DHCheck Skip CVE-2020-13593 Texas Instruments non_compliance_dhcheck_skip.py
ESP32 HCI Desync CVE-2020-13595 Espressif Systems esp32_hci_desync.py
Zephyr Invalid Sequence CVE-2020-10061 Zephyr Project zephyr_invalid_sequence.py
Invalid Channel Map CVE-2020-10069
CVE-2020-13594
Zephyr Project
Espressif Systems
Microchip
invalid_channel_map.py

Generally, products using the affected SoCs employ a watchdog to automatically restart the BLE SoC in the case a fault occurs, hence not all products can be deadlocked. Nevertheless, it should be possible to get some visual or audio indication from the product if the same crashes and restarts.

Zero LTK Installation (CVE-2019-19194)

The most critical SweynTooth vulnerability is the Zero LTK Installation which allows an attacker to fully bypass the latest Bluetooth pairing procedure (secure connections) by forcing an encryption setup procedure with a zero filled LTK. In order to test your device against this vulnerability, the device must accept or support secure connections as pairing method. You can run the PoC as follows:

python Telink_zero_ltk_installation.py COM7 A4:C1:38:D8:AD:A9

Note that the arguments COM7 and A4:C1:38:D8:AD:A9 are different based on your setup. If the device is vulnerable, the PoC outputs the following:

zero_ltk

LLID Deadlock (CVE-2019-17060/1)

The LLID deadlock script clears the LLID field when sending both version request or pairing requests in an alternative manner on each re-connection with the peripheral. This is done to to trigger the vulnerability in both NXP and Cypress vulnerable SoCs. When runnig the script against the vulnerable KW41Z, the stack is deadlocked and should send out of order Link Layer packets. The script tries to detect when the stack is deadlocked and outputs the following for vulnerable KW41Z devices:

zero_ltk

Vulnerable Cypress devices generally disable advertisements after the attack. Therefore you should see an error message indicating that a crash has been detected. When testing this script against a vulnerable Fitbit Inspire, the smartwatch either crashes immediately or disable its advertisements temporarily. Intermittent attacks against this device should cause a permanent BLE malfunction, requiring the user to manually reboot Fitbit inspire.

KNOB Tester (Bluetooth Low Energy variant)

While KNOB mainly affected Bluetooth Classic devices due to the key size being reduced to 1 byte, it's still possible to reduce the key entropy of Bluetooth Low Energy devices to 7 bytes (minimum compliant key size) during the SMP pairing procedure. The implication of such compliant BLE entropy reduction was discussed in "Low Entropy Key Negotiation Attacks on Bluetooth and Bluetooth Low Energy" by Antonioli, Daniele et. al.

We have made available a simple script to check what key sizes are acceptable by a BLE peripheral device. You can run the BLE KNOB tester as follows:

# Windows
python extras\knob_tester_ble.py COM6 a4:c1:38:d8:ad:a9
# Linux
python extras/knob_tester_ble.py /dev/ttyACM0 a4:c1:38:d8:ad:a9

Do not forget to change the COM6 and a4:c1:38:d8:ad:a9 to other values according to the nRF52 dongle serial port (usually /dev/ttyACM0 on Linux) and the address of the BLE device under test. If the tool detects the peripheral to accept other key sizes other than 16 bytes, it will list them as shown below:

zero_ltk

Captures

The folder captures contains some sample captures of each vulnerability. We have also added some noncompliance cases detected in some SoCs.

Extras

The extras folder contains some additional scripts related to non-compliances and some SweynTooth variants. Check the table of extras scripts on extras/README.md for more information.

Acknowledgements

This research was partially supported by Keysight Technologies.

  • Scapy - Packet manipulation library.
  • Colorama - Cross-platform coloured terminal text in Python.