CadQuery/cadquery

Issues

• Cutting a face with a solid

  #1695 opened 17 days ago by bragostin
  5

• Exporting STEP with colors doesn't de-duplicate as expected with different, but same-valued Colors

  #1689 opened 15 days ago by johnbeard
  1

• Docs for overloads

  #1697 opened 16 days ago by adam-urbanczyk
  0

• Workplane.__add__ raises ValueError instead of returning NotImplemented

  #1693 opened 23 days ago by 0xorial
  1

• Error in run.sh for running CQ-editor

  #1696 opened 22 days ago by MatthewTromp
  0

• About the potential to enhance the assembly tree structure?

  #1691 opened 25 days ago by huskier
  3

• How to get the absolute location of a tag?

  #1635 opened 4 months ago by lenianiva
  8

• Attributeerror for bool8 to bool in numpy?

  #1626 opened 4 months ago by ghxstweb
  11

• Some examples how `projectionDir` works in SVG export

  #1685 opened a month ago by Jopie01
  2

• Docs: discord invites expired

  #1680 opened a month ago by erooke
  4

• How to select a specific wire in a series of wires? The selection ".wire("<X")" works fine; however, the selection ".wires("<X[-2]")" refuses to work.

  #1683 opened a month ago by huskier
  9

• Generic backend interface for cq.vis.show

  #1684 opened a month ago by adam-urbanczyk
  0

• Implement outerShell

  #1627 opened a month ago by adam-urbanczyk
  0

• cq.Solid.isSolid() not working?

  #1671 opened a month ago by bragostin
  3

• STEP export of a swept tube with 90 angles leads to incorrect geometry

  #1678 opened 2 months ago by CasperH2O
  1

• Show object of profile with multiple circles shows only 1

  #1677 opened a month ago by CasperH2O
  2

• Way to perform in-memory export / export to custom IO object

  #1676 opened 2 months ago by nint8835
  1

• Documentation: Where to get help?

  #1667 opened 2 months ago by tschaboo
  0

• Creating a shell out of a tapered box causes an "BRep_Tool:: no parameter on edge" error

  #1670 opened 2 months ago by knower-to-be
  0

• hole in model disappears when sides are filleted

  #1668 opened 2 months ago by bigfighter
  1

• Thin-feature extrude of trajectory traces on a plane

  #1659 opened 2 months ago by farinha93
  3

• I do not expect the parameters' order in PointInPlane constraint matters, but it does matter.

  #1666 opened 2 months ago by huskier
  2

• One line that simply crashes all RAM memory

  #1665 opened 2 months ago by filaPro
  7

• Segfault when operating on imported geometry with filleted rotational cuts

  #1662 opened 2 months ago by arsenixprime
  4

• There is no sufficient document for Sketch's arc function.

  #1663 opened 2 months ago by huskier
  0

• Wires selection logic of "cq.NearestToPointSelector((0, 0, 1)) or cq.NearestToPointSelector((20, 0, 1))" does not work.

  #1660 opened 2 months ago by huskier
  7

• How to get the inner wires created by a rectangle and a circle?

  #1661 opened 2 months ago by huskier
  2

• `cskHole` generates incorrect results for shallow holes

  #1653 opened 3 months ago by TheLostLambda
  1

• AttributeError: 'Workplane' object has no attribute 'cylinder'

  #1654 opened 3 months ago by WWWladWWW
  3

• Proper steps using pyinstaller to create a .exe for a file using cadquery

  #1655 opened 3 months ago by Shrav108
  1

• Projection

  #1649 opened 3 months ago by moOsama76
  1

• Body rotations from a repeatedly solved assembly seem to be off by factor 1.29

  #1651 opened 3 months ago by unrealBob
  5

• When the same sketch is placed on the "XZ-plane" and the "ZX-plane", how to keep the sketch's direction the same?

  #1652 opened 3 months ago by huskier
  2

• Which center fucntion is more appropriate for "Point constraint", Center()(=centerOfMass) or CenterOfBoundBox()?

  #1650 opened 3 months ago by huskier
  2

• Export assy to brep

  #1648 opened 3 months ago by adam-urbanczyk
  0

• allow face selectors to be relative to workplane ?

  #1644 opened 3 months ago by MarcWeber
  2

• pyright and extending workplane

  #1645 opened 3 months ago by MarcWeber
  0

• Workplane.clone()

  #1643 opened 3 months ago by wirekang
  2

• Length of an edge

  #1641 opened 4 months ago by lenianiva
  5

• Operation along a rounded box

  #1640 opened 4 months ago by jniclas
  2

• Sketches edges connection misplaced

  #1632 opened 4 months ago by eddieliberato
  8

• free function sweep BRepOffsetAPI_MakePipeShell option to SetMode

  #1639 opened 4 months ago by lorenzncode
  0

• Problem importing STEP with colours

  #1638 opened 4 months ago by julianstirling
  1

• [Bug] Incorrect transform chaining in nested assemblies

  #1628 opened 4 months ago by lenianiva
  3

• Visualizing multiple vertices (3d points)

  #1636 opened 4 months ago by jorritsma
  2

• Cannot create a free standing bezier curve

  #1637 opened 4 months ago by lenianiva
  1

• Implement pickling support

  #1634 opened 4 months ago by adam-urbanczyk
  0

• Face support in free function sweep

  #1621 opened 4 months ago by adam-urbanczyk
  0

• Exported GLB is too large

  #1624 opened 4 months ago by MenachemBerkovich
  1

• Add materials to assemblies

  #1620 opened 5 months ago by adrianschneider94
  8