![](https://raw.githubusercontent.com/CadmonkeyFPV/Salad_Fork/master/images/salad-fork-hero.png)
The Salad Fork is a Voron Trident scaled down to use 1515 aluminum extrusions for the frame instead of 2020, exactly like how the Micron is a Voron 2.4 scaled down. It is not a modification for a Voron V0, but a from-scratch build that requires longer extrusions and rails, two more V0.1 integrated-leadscrew Z motors, a higher-wattage power supply, possibly a bigger bed…
Why go to the trouble of a whole new build? Well, Salad Fork features:
Coming soon™…
The latest official BOM is available on Google Sheets. The information below may not be complete; last updated November 17, 2021.
Frame (120mm³ build volume)
Component |
Quantity |
Notes |
HFS3-1515-400 |
4 |
Cross-drill 7.5mm from both ends, plus drill 1× gantry hole each per drill guide |
HFS3-1515-270 |
6 |
Tap both ends |
HFS3-1515-240 |
5 |
Tap both ends, cross-drill 2 extrusions at center |
HFS3-1515-230 |
1 |
Tap one end |
HFS3-1515-210 |
1 |
|
HFS3-1515-145 |
1 |
|
HFS3-1515-140 |
1 |
Tap one end |
Frame (150mm³ build volume)
Component |
Quantity |
Notes |
HFS3-1515-400 |
4 |
Cross-drill 7.5mm from both ends, plus drill 1× gantry hole each per drill guide |
HFS3-1515-300 |
6 |
Tap both ends |
HFS3-1515-270 |
5 |
Tap both ends, cross-drill 2 extrusions at center |
HSF3-1515-240 |
1 |
Tap one end |
HSF3-1515-230 |
1 |
|
HFS3-1515-175 |
1 |
|
HSF3-1515-170 |
1 |
Tap one end |
Fasteners
Component |
Quantity |
M2x6 BHCS |
24 |
M2x10 self-tapping |
4 |
M2x12 SHCS |
8 |
M3x6 BHCS |
49 |
M3x6 SHCS |
10 |
M3x8 BHCS |
41 |
M3x8 SHCS |
8 |
M3x10 BHCS |
40 |
M3x12 BHCS |
4 |
M3x12 SHCS |
18 |
M3x16 SHCS |
3 |
M3x20 SHCS |
6 |
M3x25 BHCS |
18 |
M3x25 SHCS |
6 |
M3x30 BHCS |
2 |
M3x35 BHCS |
5 |
M3x35 SHCS |
4 |
M5x16 BHCS |
3 |
M3 Heatset |
30 |
M3 Washer |
26 |
M3 lock nut |
6 |
M3 hex nut |
98 |
M4 knurled nut |
3 |
M5 hex nut |
3 |
6x3 neodymium magnet |
8 |
Motion
Component |
Quantity |
NEMA14 stepper |
2 |
NEMA17 integrated-leadscrew stepper |
3 |
MGN9C 180 |
1 (for 120mm³) |
MGN7H 200 |
5 (for 120mm³) |
MGN9C 210 |
1 (for 150mm³) |
MGN7H 230 |
2 (for 150mm³) |
MGN7H 200 |
3 (for 150mm³) |
Gates GT2 6mm open belt |
4m |
F623-RS flanged bearings |
24 |
GE5C spherical bearings |
3 |
D2F switch |
4 |
TR8×8 leadscrew nut |
3 |
Rubber foot |
4 |
Electronics
Component |
Quantity |
Notes |
Control board |
1 |
Fysetc Spider or BigTreeTech Octopus |
TMC 2209 driver |
6 |
|
Raspberry Pi |
1 |
The Klipper host |
C13 power cable |
1 |
|
Meanwell UHP-200-24 |
1 |
|
Keenovo 100mm² 60W 24V heater |
1 |
DC bed heater, 120mm³ build |
Keenovo 120mm² 120W 24V heater |
1 |
DC bed heater, 150mm³ build |
Keenovo 100mm² 60W 120/240V heater |
1 |
AC bed heater, 120mm³ build |
Keenovo 120mm² 120W 120/240V heater |
1 |
AC bed heater, 150mm³ build |
AC SSR (Omron G3NA-210B-UTU DC5-24, Panasonic AQA211VL) |
1 |
for AC bed heater |
Toolhead
Component |
Quantity |
Notes |
NEMA14 pancake stepper |
1 |
|
BMG gear set |
1 |
|
3010 axial fan |
1 |
Only for Dragonfly BMS hotend |
3007 axial fan |
1 |
All other hotends |
3010 blower fan |
2 |
|
Hotend |
1 |
|
![Salad Fork video from CadmonkeyFPV](https://camo.githubusercontent.com/e664b3db6fb2349ce2b1f0ae3f086a87652b94a955f458fe80a35dd680b01f6b/68747470733a2f2f696d672e796f75747562652e636f6d2f76692f69627074463274373341342f302e6a7067)