CapnBry/HeaterMeter

Issues

• Is the project dead?

  #65 opened 7 months ago by asdkjasdfla
  3

• New wireless thermometer option

  #63 opened 2 years ago by rjroch
  4

• Steinhart Coefficients for CDN AD-DTP392 Probe

  #52 opened 5 years ago by GeerGuy
  2

• Qn: thermoworks pro series basic usage

  #62 opened 2 years ago by bsr203
  1

• Upgrading AVR firmware

  #61 opened 2 years ago by brafster
  2

• Raspberry pi Zero 2

  #60 opened 3 years ago by brafster
  2

• Proportional on measurement

  #42 opened 6 years ago by mattncsu
  16

• Port for ESP32

  #59 opened 3 years ago by Bananamannn
  2

• msmtp configuration broken for PLAIN LOGIN authentication

  #58 opened 4 years ago by jefw
  2

• compatibility with MQTT server / home assistant

  #48 opened 5 years ago by pilot1981
  19

• Temp Probe Graphs

  #55 opened 4 years ago by CoffeeTronics
  1

• 4.0 PCB Compatibility

  #57 opened 4 years ago by TristanDoherty
  8

• Join Wifi network from the heatermeter

  #56 opened 4 years ago by TristanDoherty
  1

• Idea: Also be able to use the BLE Meater probes

  #54 opened 5 years ago by frankhommers
  1

• Streaming url missing CORS headers

  #53 opened 5 years ago by DavidPagels
  1

• "Getting started" guide for hacking on the UI?

  #49 opened 5 years ago by marcins
  2

• Access for historic data currently not possible because of CORS errors

  #44 opened 6 years ago by iGod42
  5

• HeaterMeter.com is offline

  #45 opened 6 years ago by TheGorf
  7

• Export CSV metrics

  #47 opened 6 years ago by hari-bo
  4

• Hacking linkmeterd

  #41 opened 7 years ago by chrissnell
  1

• Port to other hardware platforms

  #39 opened 7 years ago by brianjmurrell
  1

• wifi config persistent?

  #35 opened 8 years ago by Jennnifers
  10

• Upgrade SW over network?

  #37 opened 8 years ago by theschles
  1

• Other SMS Provider

  #36 opened 8 years ago by technofetishism
  3

• NEW fan door

  #15 opened 9 years ago by marcoemanuelecocco
  2

• Switch not available

  #14 opened 9 years ago by mcrabb
  0

• Is there support for Pellet auger

  #25 opened 9 years ago by mvogt99
  2

• What's the point of the 100k resistors between analog inputs and voltage divider circuits?

  #16 opened 9 years ago by bgentry
  2

• Unable to download the HeaterMeter firmware... Page unavailble

  #6 opened 11 years ago by rv6584
  2

• 4.1 Heatermeter board?

  #5 opened 11 years ago by dmann000
  1

• wiki/Building-OpenWrt-from-Source is out of date

  #4 opened 11 years ago by dcarter
  1

• Temperature offset problem

  #3 opened 12 years ago by ioudeveldhuis
  2

• Maverick Temperature Probes

  #1 opened 12 years ago
  2

• Great project and design question

  #2 opened 12 years ago by webbr23
  1