CaptainBobSim/The-Cessna-172-Project-V3

Issues

• COM NAV GND Fault? Make sure COM Encoder works before GNS 530 PCB Release

  #486 opened 5 months ago by CaptainBobSim
  0

• Heat Set Insertify all gauges so that there are no front screws (also alow self tap)

  #485 opened 5 months ago by CaptainBobSim
  0

• Revamp README template component level

  #484 opened 5 months ago by CaptainBobSim
  0

• Instrument Panel arrows need to have fill settings

  #483 opened 5 months ago by CaptainBobSim
  0

• fix the fweaking panel file

  #476 opened 5 months ago by CaptainBobSim
  1

• 3mm LED footprint is confusing

  #482 opened 5 months ago by CaptainBobSim
  0

• Digitalize Button Standard

  #481 opened 5 months ago by CaptainBobSim
  0

• redo flaps faceplate for multi color print

  #480 opened 5 months ago by CaptainBobSim
  0

• Do some I2C Tests

  #479 opened 6 months ago by CaptainBobSim
  0

• Reconnect these 👉👈

  #475 opened 6 months ago by CaptainBobSim
  1

• Forgive me for I have sinned

  #474 opened 6 months ago by CaptainBobSim
  1

• Start using DM13A

  #478 opened 6 months ago by CaptainBobSim
  0

• GNS 530 3 trace disconnect also applies to GNS430 design

  #477 opened 6 months ago by CaptainBobSim
  0

• Make "Value" Of each package partslist friendly

  #473 opened 6 months ago by CaptainBobSim
  0

• I've been calling the "Mega 2560 Pro" the "Mega 2560 Pro Mini" which is wrong

  #471 opened 7 months ago by CaptainBobSim
  0

• ADF MSFS Config

  #470 opened 7 months ago by CaptainBobSim
  0

• Pin 13 Strange behavior

  #446 opened 7 months ago by CaptainBobSim
  2

• You should add a Mounting Template to ADF

  #469 opened 7 months ago by CaptainBobSim
  0

• Potential Dimming Solution

  #468 opened 7 months ago by CaptainBobSim
  0

• Update Printables Radio

  #467 opened 7 months ago by CaptainBobSim
  0

• Export V2 Radio Source Files

  #466 opened 7 months ago by CaptainBobSim
  0

• Top Priorities (Physical sim): Ais, alt, rpm

  #465 opened 8 months ago by CaptainBobSim
  0

• The green button on https://captainbobsim.com/downloads/ links to a not-existing page.

  #464 opened 8 months ago by CaptainBobSim
  0

• Rework BOB Pin 13

  #459 opened 8 months ago by CaptainBobSim
  1

• Before release, make text bigger

  #463 opened 8 months ago by CaptainBobSim
  0

• Do a Pro Micro IDC_20

  #462 opened 8 months ago by CaptainBobSim
  0

• ADF Bezel Light Curtain :)

  #461 opened 8 months ago by CaptainBobSim
  0

• Initialize to Frequency ADF?

  #460 opened 8 months ago by CaptainBobSim
  0

• Glass Dimensions

  #458 opened 8 months ago by CaptainBobSim
  0

• KR87 Count Down mode (not yet implemented)

  #457 opened 8 months ago by CaptainBobSim
  0

• Make a whiskey compass

  #456 opened 8 months ago by CaptainBobSim
  0

• A/C Vent design

  #455 opened 8 months ago by CaptainBobSim
  0

• Feedback on videos

  #454 opened 8 months ago by CaptainBobSim
  0

• Potential CB Design:

  #453 opened 8 months ago by CaptainBobSim
  0

• Instrument panel troubles

  #449 opened 9 months ago by CaptainBobSim
  0

• Radio: Did you notice you have NAV labeled as COMM in your designs?

  #448 opened 9 months ago by CaptainBobSim
  4

• Progress Checklist

  #441 opened 10 months ago by CaptainBobSim
  0

• Clock issue with engine

  #447 opened 9 months ago by CaptainBobSim
  0

• 10µF cap is wrong size on KR87 1.0 (Not critical fix)

  #445 opened 9 months ago by CaptainBobSim
  0

• Make Annunciator Documentation

  #444 opened 9 months ago by CaptainBobSim
  0

• Is there any way to 3D print the panel base? (For switch panel)

  #443 opened 9 months ago by CaptainBobSim
  0

• Backlighting Tips for Avionics

  #442 opened 10 months ago by CaptainBobSim
  0

• Yoke Files

  #440 opened 10 months ago by CaptainBobSim
  0

• KT-76C Text - XPDR not XPNDR and remove TSO

  #439 opened 10 months ago by CaptainBobSim
  1

• Radio Stack Proto Heights - have them match the Transponder

  #436 opened 10 months ago by CaptainBobSim
  0

• XPNDR KT-76C When does "GND" Illuminate?

  #433 opened 10 months ago by CaptainBobSim
  1

• Live stream x plane transponder config

  #438 opened 10 months ago by CaptainBobSim
  0

• The glareshield is too thiccc!

  #437 opened 10 months ago by CaptainBobSim
  0

• Export XPNDR PCB outline for perf board

  #435 opened 10 months ago by CaptainBobSim
  0

• KT-76C Error state?

  #434 opened 10 months ago by CaptainBobSim
  0