CarlFK/pici

Issues

• need a MicroPython demo bitstream

  #44 opened 2 months ago by CarlFK
  0

• upload option

  #41 opened 2 months ago by CarlFK
  1

• Kernel Panic - says no init but init

  #43 opened 2 months ago by CarlFK
  0

• kernel loaded but not executed

  #42 opened 2 months ago by CarlFK
  0

• NoArty but ArtyWire

  #39 opened 2 months ago by CarlFK
  3

• Improve the stream latency?

  #15 opened 9 months ago by asinghani
  2

• Figure out why the raspberry pi sometimes takes 2 minutes to boot

  #33 opened 2 months ago by mithro
  5

• Make the log / status messages more useful interesting / understandable

  #34 opened 2 months ago by mithro
  1

• Add a boot check which verifies the Arty FPGA is found and running correctly

  #21 opened 2 months ago by mithro
  1

• Make the demo buttons work

  #27 opened 2 months ago by mithro
  1

• Add support for using SSH jump/proxy hosts rather than port numbers

  #31 opened 2 months ago by mithro
  3

• Use screen / tmux as shell on RPi

  #37 opened 2 months ago by mithro
  1

• Download the board configuration information from Google sheet

  #28 opened 2 months ago by mithro
  4

• Add a "reserve" button

  #36 opened 2 months ago by mithro
  0

• Make the log keep a history

  #35 opened 2 months ago by mithro
  0

• Show how to use the Vivado remote debugging proxy thingy

  #32 opened 2 months ago by mithro
  0

• Put all FPGAs on fpgas.mithis.com

  #30 opened 2 months ago by mithro
  0

• Make the videoes automatically play

  #29 opened 2 months ago by mithro
  1

• Get the status field on each FPGA page working

  #26 opened 2 months ago by mithro
  0

• Get the status field working on front page

  #25 opened 2 months ago by mithro
  0

• Check that each FPGA is working once a day

  #22 opened 2 months ago by mithro
  0

• linux_litex demo stuck on tftp - sometimes

  #19 opened 2 months ago by CarlFK
  3

• picocom terminal no control the lights or something.

  #18 opened 6 months ago by CarlFK
  1

• Write a getting-started guide

  #16 opened 9 months ago by asinghani
  4

• Add pip + pyserial + tqdm + numpy

  #13 opened 6 months ago by asinghani
  2

• wiki needs improvements

  #17 opened 8 months ago by WeepingClown13
  1

• Add openFPGALoader

  #12 opened 9 months ago by asinghani
  1

• overlayroot package does not build initrd

  #10 opened 9 months ago by CarlFK
  9

• Add minicom + screen

  #14 opened 9 months ago by asinghani
  0

• Move the fpgas.mithis.com to k207.fpgas.mithis.com

  #11 opened 10 months ago by mithro
  0