Debug the real-mode setup code and protected mode of Linux Kernel.
-
Environment: Tested on Ubuntu 20.04.1
-
Required package
$ sudo apt-get install qemu-system-x86- Run the script
scripts/build.sh. This automatically builds Linux kernel (v5.11) and root filesystem (busybox).
$ ./scripts/build.sh- Launch a guest OS. This script pauses the OS launch and waits for remote debug via gdb. (Note: If you want to shutdown the guest OS, please press the key combination
ctrl+a x).
$ ./scripts/launch-vm.sh- Open another terminal and execute the script
scripts/launch-gdb.sh.
$ ./scripts/launch-gdb.sh
- Open one terminal and execute the following command (This script pauses the OS launch and waits for remote debug via gdb).
$ ./scripts/launch-vm.sh- Open another terminal and execute the script
scripts/launch-gdb.sh. This sets a breakpoint at the labelstart_of_setup (arch/x86/boot/header.S)and continues to run the guest OS. The code will be paused at the starting address of start_of_setup. You can use gdb commands to debug the real-mode setup code of Linux kernel. Enjoy debugging.- The script sets a breakpoint at 0x10200, which is real mode entry code of Linux kernel.
- Execute gdb command
sito step one instruction.
$ ./scripts/launch-gdb.sh
# debug real-mode code of Linux kernel
add-symbol-file /home/adrian/git-repo/gdb-linux-real-mode/out/obj/linux/arch/x86/boot/setup.elf 0x103ff -s .bstext 0x10000 -s .bsdata 0x1002d -s .header 0x101ef -s .entrytext 0x1026c -s .inittext 0x102d4 -s .initdata 0x103e1 -s .text32 0x130cc -s .bss 0x136e0 -s .data 0x13660
target remote :1234
#b start_of_setup
b *0x10200
c
GNU gdb (Ubuntu 9.2-0ubuntu1~20.04) 9.2
Copyright (C) 2020 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word".
add symbol table from file "/home/adrian/git-repo/gdb-linux-real-mode/out/obj/linux/arch/x86/boot/setup.elf" at
.text_addr = 0x103ff
.bstext_addr = 0x10000
.bsdata_addr = 0x1002d
.header_addr = 0x101ef
.entrytext_addr = 0x1026c
.inittext_addr = 0x102d4
.initdata_addr = 0x103e1
.text32_addr = 0x130cc
.bss_addr = 0x136e0
.data_addr = 0x13660
warning: No executable has been specified and target does not support
determining executable automatically. Try using the "file" command.
---------------------------[ STACK ]---
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
---------------------------[ DS:SI ]---
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
---------------------------[ ES:DI ]---
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
----------------------------[ CPU ]----
AX: 0000 BX: 0000 CX: 0000 DX: 0663
SI: 0000 DI: 0000 SP: 0000 BP: 0000
CS: F000 DS: 0000 ES: 0000 SS: 0000
IP: FFF0 RIP:0000FFF0
CS:IP: F000:FFF0 (0xFFFF0)
SS:SP: 0000:0000 (0x00000)
SS:BP: 0000:0000 (0x00000)
OF <0> DF <0> IF <0> TF <0> SF <0> ZF <0> AF <0> PF <0> CF <0>
ID <0> VIP <0> VIF <0> AC <0> VM <0> RF <0> NT <0> IOPL <0>
---------------------------[ CODE ]----
0xffff0: (bad)
0xffff1: pop %rbx
0xffff2: loopne 0xffff4
0xffff4: lock xor %dh,(%rsi)
0xffff7: (bad)
0xffff8: xor (%rbx),%dh
0xffffa: (bad)
0xffffb: cmp %edi,(%rcx)
0xffffd: add %bh,%ah
0xfffff: add %al,(%rax)
0x000000000000fff0 in ?? ()
Breakpoint 1 at 0x10200
Thread 1 received signal SIGTRAP, Trace/breakpoint trap.
---------------------------[ STACK ]---
0000 0000 0000 0000 0000 0000 0000 0000
6165 6C72 7079 6972 746E 3D6B 6573 6972
---------------------------[ DS:SI ]---
10000000: EA 05 00 C0 07 8C C8 8E D8 8E C0 8E D0 31 E4 FB .............1..
10000010: FC BE 2D 00 AC 20 C0 74 09 B4 0E BB 07 00 CD 10 ..-....t........
10000020: EB F2 31 C0 CD 16 CD 19 EA F0 FF 00 F0 55 73 65 ..1..........Use
10000030: 20 61 20 62 6F 6F 74 20 6C 6F 61 64 65 72 2E 0D .a.boot.loader..
---------------------------[ ES:DI ]---
10000000: EA 05 00 C0 07 8C C8 8E D8 8E C0 8E D0 31 E4 FB .............1..
10000010: FC BE 2D 00 AC 20 C0 74 09 B4 0E BB 07 00 CD 10 ..-....t........
10000020: EB F2 31 C0 CD 16 CD 19 EA F0 FF 00 F0 55 73 65 ..1..........Use
10000030: 20 61 20 62 6F 6F 74 20 6C 6F 61 64 65 72 2E 0D .a.boot.loader..
----------------------------[ CPU ]----
AX: 1020 BX: 0000 CX: 0000 DX: 0000
SI: 0000 DI: 0000 SP: FFF0 BP: 0000
CS: 1020 DS: 1000 ES: 1000 SS: 1000
IP: 0000 RIP:00000000
CS:IP: 1020:0000 (0x10200)
SS:SP: 1000:FFF0 (0x1FFF0)
SS:BP: 1000:0000 (0x10000)
OF <0> DF <0> IF <0> TF <0> SF <0> ZF <1> AF <0> PF <1> CF <0>
ID <0> VIP <0> VIF <0> AC <0> VM <0> RF <0> NT <0> IOPL <0>
---------------------------[ CODE ]----
0x10200: jmp 0x1026c <start_of_setup>
0x10202: rex.W
0x10203: fs jb 0x10259
0x10206: lar (%rax),%eax
0x10209: add %al,(%rax)
0x1020b: add %al,(%rax)
0x1020d: adc %ah,0x33(%rax)
0x10210: mov $0x81,%al
0x10212: add %al,0x100000(%rax)
0x10218: add %dl,(%rax)
0x0000000000000000 in ?? ()
(gdb) si
---------------------------[ STACK ]---
0000 0000 0000 0000 0000 0000 0000 0000
6165 6C72 7079 6972 746E 3D6B 6573 6972
---------------------------[ DS:SI ]---
10000000: EA 05 00 C0 07 8C C8 8E D8 8E C0 8E D0 31 E4 FB .............1..
10000010: FC BE 2D 00 AC 20 C0 74 09 B4 0E BB 07 00 CD 10 ..-....t........
10000020: EB F2 31 C0 CD 16 CD 19 EA F0 FF 00 F0 55 73 65 ..1..........Use
10000030: 20 61 20 62 6F 6F 74 20 6C 6F 61 64 65 72 2E 0D .a.boot.loader..
---------------------------[ ES:DI ]---
10000000: EA 05 00 C0 07 8C C8 8E D8 8E C0 8E D0 31 E4 FB .............1..
10000010: FC BE 2D 00 AC 20 C0 74 09 B4 0E BB 07 00 CD 10 ..-....t........
10000020: EB F2 31 C0 CD 16 CD 19 EA F0 FF 00 F0 55 73 65 ..1..........Use
10000030: 20 61 20 62 6F 6F 74 20 6C 6F 61 64 65 72 2E 0D .a.boot.loader..
----------------------------[ CPU ]----
AX: 1020 BX: 0000 CX: 0000 DX: 0000
SI: 0000 DI: 0000 SP: FFF0 BP: 0000
CS: 1020 DS: 1000 ES: 1000 SS: 1000
IP: 006C RIP:0000006C
CS:IP: 1020:006C (0x1026C)
SS:SP: 1000:FFF0 (0x1FFF0)
SS:BP: 1000:0000 (0x10000)
OF <0> DF <0> IF <0> TF <0> SF <0> ZF <1> AF <0> PF <1> CF <0>
ID <0> VIP <0> VIF <0> AC <0> VM <0> RF <0> NT <0> IOPL <0>
---------------------------[ CODE ]----
0x1026c <start_of_setup>: mov %ds,%eax
0x1026e <start_of_setup+2>: mov %eax,%es
0x10270 <start_of_setup+4>: cld
0x10271 <start_of_setup+5>: mov %ss,%edx
0x10273 <start_of_setup+7>: cmp %eax,%edx
0x10275 <start_of_setup+9>: mov %esp,%edx
0x10277 <start_of_setup+11>: je 0x1028f <start_of_setup+35>
0x10279 <start_of_setup+13>: mov $0x6f64a10,%edx
0x1027e <start_of_setup+18>: adc %eax,(%rdx)
0x10280 <start_of_setup+20>: xorb $0x16,-0x75(%rsp,%rax,1)
0x000000000000006c in ?? ()
(gdb) si
---------------------------[ STACK ]---
0000 0000 0000 0000 0000 0000 0000 0000
6165 6C72 7079 6972 746E 3D6B 6573 6972
---------------------------[ DS:SI ]---
10000000: EA 05 00 C0 07 8C C8 8E D8 8E C0 8E D0 31 E4 FB .............1..
10000010: FC BE 2D 00 AC 20 C0 74 09 B4 0E BB 07 00 CD 10 ..-....t........
10000020: EB F2 31 C0 CD 16 CD 19 EA F0 FF 00 F0 55 73 65 ..1..........Use
10000030: 20 61 20 62 6F 6F 74 20 6C 6F 61 64 65 72 2E 0D .a.boot.loader..
---------------------------[ ES:DI ]---
10000000: EA 05 00 C0 07 8C C8 8E D8 8E C0 8E D0 31 E4 FB .............1..
10000010: FC BE 2D 00 AC 20 C0 74 09 B4 0E BB 07 00 CD 10 ..-....t........
10000020: EB F2 31 C0 CD 16 CD 19 EA F0 FF 00 F0 55 73 65 ..1..........Use
10000030: 20 61 20 62 6F 6F 74 20 6C 6F 61 64 65 72 2E 0D .a.boot.loader..
----------------------------[ CPU ]----
AX: 1000 BX: 0000 CX: 0000 DX: 0000
SI: 0000 DI: 0000 SP: FFF0 BP: 0000
CS: 1020 DS: 1000 ES: 1000 SS: 1000
IP: 006E RIP:0000006E
CS:IP: 1020:006E (0x1026E)
SS:SP: 1000:FFF0 (0x1FFF0)
SS:BP: 1000:0000 (0x10000)
OF <0> DF <0> IF <0> TF <0> SF <0> ZF <1> AF <0> PF <1> CF <0>
ID <0> VIP <0> VIF <0> AC <0> VM <0> RF <0> NT <0> IOPL <0>
---------------------------[ CODE ]----
0x1026e <start_of_setup+2>: mov %eax,%es
0x10270 <start_of_setup+4>: cld
0x10271 <start_of_setup+5>: mov %ss,%edx
0x10273 <start_of_setup+7>: cmp %eax,%edx
0x10275 <start_of_setup+9>: mov %esp,%edx
0x10277 <start_of_setup+11>: je 0x1028f <start_of_setup+35>
0x10279 <start_of_setup+13>: mov $0x6f64a10,%edx
0x1027e <start_of_setup+18>: adc %eax,(%rdx)
0x10280 <start_of_setup+20>: xorb $0x16,-0x75(%rsp,%rax,1)
0x10285 <start_of_setup+25>: and $0x2,%al
0x000000000000006e in ?? ()- Open one terminal and execute the following command (This script pauses the OS launch and waits for remote debug via gdb).
$ ./scripts/launch-vm.sh- Open another terminal and execute the script
scripts/launch-gdb.sh.- The script sets a breakpoint at 0x10200, which is real mode entry code of Linux kernel.
- Manually execute gdb command
b *0x113c9to add a new breakpoint at 0x113c9 . The address is the instruction for enabling PE bit of CR00x113c9 <protected_mode_jump+31>: mov %rdx, %cr0. - Execute gdb command
info b,si, andc. - Execute gdb command
info registers cr0to check if PE bit is set.
$ ./scripts/launch-gdb.sh
# debug real-mode code of Linux kernel
add-symbol-file /home/adrian/git-repo/gdb-linux-real-mode/out/obj/linux/arch/x86/boot/setup.elf 0x103ff -s .bstext 0x10000 -s .bsdata 0x1002d -s .header 0x101ef -s .entrytext 0x1026c -s .inittext 0x102d4 -s .initdata 0x103e1 -s .text32 0x130cc -s .bss 0x136e0 -s .data 0x13660
target remote :1234
#b start_of_setup
b *0x10200
c
GNU gdb (Ubuntu 9.2-0ubuntu1~20.04) 9.2
Copyright (C) 2020 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word".
add symbol table from file "/home/adrian/git-repo/gdb-linux-real-mode/out/obj/linux/arch/x86/boot/setup.elf" at
.text_addr = 0x103ff
.bstext_addr = 0x10000
.bsdata_addr = 0x1002d
.header_addr = 0x101ef
.entrytext_addr = 0x1026c
.inittext_addr = 0x102d4
.initdata_addr = 0x103e1
.text32_addr = 0x130cc
.bss_addr = 0x136e0
.data_addr = 0x13660
warning: No executable has been specified and target does not support
determining executable automatically. Try using the "file" command.
---------------------------[ STACK ]---
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
---------------------------[ DS:SI ]---
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
---------------------------[ ES:DI ]---
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
----------------------------[ CPU ]----
AX: 0000 BX: 0000 CX: 0000 DX: 0663
SI: 0000 DI: 0000 SP: 0000 BP: 0000
CS: F000 DS: 0000 ES: 0000 SS: 0000
IP: FFF0 RIP:0000FFF0
CS:IP: F000:FFF0 (0xFFFF0)
SS:SP: 0000:0000 (0x00000)
SS:BP: 0000:0000 (0x00000)
----------------------------[ CPU Control Register]----
cr0 0x60000010 [ CD NW ET ]
----------------------------[ eflags]----
OF <0> DF <0> IF <0> TF <0> SF <0> ZF <0> AF <0> PF <0> CF <0>
ID <0> VIP <0> VIF <0> AC <0> VM <0> RF <0> NT <0> IOPL <0>
---------------------------[ CODE ]----
0xffff0: (bad)
0xffff1: pop %rbx
0xffff2: loopne 0xffff4
0xffff4: lock xor %dh,(%rsi)
0xffff7: (bad)
0xffff8: xor (%rbx),%dh
0xffffa: (bad)
0xffffb: cmp %edi,(%rcx)
0xffffd: add %bh,%ah
0xfffff: add %al,(%rax)
0x000000000000fff0 in ?? ()
Breakpoint 1 at 0x10200
Thread 1 received signal SIGTRAP, Trace/breakpoint trap.
---------------------------[ STACK ]---
0000 0000 0000 0000 0000 0000 0000 0000
6165 6C72 7079 6972 746E 3D6B 6573 6972
---------------------------[ DS:SI ]---
10000000: EA 05 00 C0 07 8C C8 8E D8 8E C0 8E D0 31 E4 FB .............1..
10000010: FC BE 2D 00 AC 20 C0 74 09 B4 0E BB 07 00 CD 10 ..-....t........
10000020: EB F2 31 C0 CD 16 CD 19 EA F0 FF 00 F0 55 73 65 ..1..........Use
10000030: 20 61 20 62 6F 6F 74 20 6C 6F 61 64 65 72 2E 0D .a.boot.loader..
---------------------------[ ES:DI ]---
10000000: EA 05 00 C0 07 8C C8 8E D8 8E C0 8E D0 31 E4 FB .............1..
10000010: FC BE 2D 00 AC 20 C0 74 09 B4 0E BB 07 00 CD 10 ..-....t........
10000020: EB F2 31 C0 CD 16 CD 19 EA F0 FF 00 F0 55 73 65 ..1..........Use
10000030: 20 61 20 62 6F 6F 74 20 6C 6F 61 64 65 72 2E 0D .a.boot.loader..
----------------------------[ CPU ]----
AX: 1020 BX: 0000 CX: 0000 DX: 0000
SI: 0000 DI: 0000 SP: FFF0 BP: 0000
CS: 1020 DS: 1000 ES: 1000 SS: 1000
IP: 0000 RIP:00000000
CS:IP: 1020:0000 (0x10200)
SS:SP: 1000:FFF0 (0x1FFF0)
SS:BP: 1000:0000 (0x10000)
----------------------------[ CPU Control Register]----
cr0 0x10 [ ET ]
----------------------------[ eflags]----
OF <0> DF <0> IF <0> TF <0> SF <0> ZF <1> AF <0> PF <1> CF <0>
ID <0> VIP <0> VIF <0> AC <0> VM <0> RF <0> NT <0> IOPL <0>
---------------------------[ CODE ]----
0x10200: jmp 0x1026c <start_of_setup>
0x10202: rex.W
0x10203: fs jb 0x10259
0x10206: lar (%rax),%eax
0x10209: add %al,(%rax)
0x1020b: add %al,(%rax)
0x1020d: adc %ah,0x33(%rax)
0x10210: mov $0x81,%al
0x10212: add %al,0x100000(%rax)
0x10218: add %dl,(%rax)
0x0000000000000000 in ?? ()
(gdb) info b
Num Type Disp Enb Address What
1 breakpoint keep y 0x0000000000010200
(gdb) b *0x113c9
Breakpoint 2 at 0x113c9: file /home/adrian/git-repo/gdb-linux-real-mode/src/linux-5.11/arch/x86/boot/pmjump.S, line 39.
(gdb) info b
Num Type Disp Enb Address What
1 breakpoint keep y 0x0000000000010200
2 breakpoint keep y 0x000113c9 /home/adrian/git-repo/gdb-linux-real-mode/src/linux-5.11/arch/x86/boot/pmjump.S:39
(gdb) si
---------------------------[ STACK ]---
0000 0000 0000 0000 0000 0000 0000 0000
6165 6C72 7079 6972 746E 3D6B 6573 6972
---------------------------[ DS:SI ]---
10000000: EA 05 00 C0 07 8C C8 8E D8 8E C0 8E D0 31 E4 FB .............1..
10000010: FC BE 2D 00 AC 20 C0 74 09 B4 0E BB 07 00 CD 10 ..-....t........
10000020: EB F2 31 C0 CD 16 CD 19 EA F0 FF 00 F0 55 73 65 ..1..........Use
10000030: 20 61 20 62 6F 6F 74 20 6C 6F 61 64 65 72 2E 0D .a.boot.loader..
---------------------------[ ES:DI ]---
10000000: EA 05 00 C0 07 8C C8 8E D8 8E C0 8E D0 31 E4 FB .............1..
10000010: FC BE 2D 00 AC 20 C0 74 09 B4 0E BB 07 00 CD 10 ..-....t........
10000020: EB F2 31 C0 CD 16 CD 19 EA F0 FF 00 F0 55 73 65 ..1..........Use
10000030: 20 61 20 62 6F 6F 74 20 6C 6F 61 64 65 72 2E 0D .a.boot.loader..
----------------------------[ CPU ]----
AX: 1020 BX: 0000 CX: 0000 DX: 0000
SI: 0000 DI: 0000 SP: FFF0 BP: 0000
CS: 1020 DS: 1000 ES: 1000 SS: 1000
IP: 006C RIP:0000006C
CS:IP: 1020:006C (0x1026C)
SS:SP: 1000:FFF0 (0x1FFF0)
SS:BP: 1000:0000 (0x10000)
----------------------------[ CPU Control Register]----
cr0 0x10 [ ET ]
----------------------------[ eflags]----
OF <0> DF <0> IF <0> TF <0> SF <0> ZF <1> AF <0> PF <1> CF <0>
ID <0> VIP <0> VIF <0> AC <0> VM <0> RF <0> NT <0> IOPL <0>
---------------------------[ CODE ]----
0x1026c <start_of_setup>: mov %ds,%eax
0x1026e <start_of_setup+2>: mov %eax,%es
0x10270 <start_of_setup+4>: cld
0x10271 <start_of_setup+5>: mov %ss,%edx
0x10273 <start_of_setup+7>: cmp %eax,%edx
0x10275 <start_of_setup+9>: mov %esp,%edx
0x10277 <start_of_setup+11>: je 0x1028f <start_of_setup+35>
0x10279 <start_of_setup+13>: mov $0x6f64a10,%edx
0x1027e <start_of_setup+18>: adc %eax,(%rdx)
0x10280 <start_of_setup+20>: xorb $0x16,-0x75(%rsp,%rax,1)
0x000000000000006c in ?? ()
(gdb) c
Continuing.
Thread 1 received signal SIGTRAP, Trace/breakpoint trap.
---------------------------[ STACK ]---
13AA 0000 0000 0000 11D8 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
---------------------------[ DS:SI ]---
100039F0: 00 08 00 FC 00 00 03 50 00 00 03 00 00 00 19 01 .......P........
10003A00: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
10003A10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
10003A20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
---------------------------[ ES:DI ]---
10000020: EB F2 31 C0 CD 16 CD 19 EA F0 FF 00 F0 55 73 65 ..1..........Use
10000030: 20 61 20 62 6F 6F 74 20 6C 6F 61 64 65 72 2E 0D .a.boot.loader..
10000040: 0A 0A 52 65 6D 6F 76 65 20 64 69 73 6B 20 61 6E ..Remove.disk.an
10000050: 64 20 70 72 65 73 73 20 61 6E 79 20 6B 65 79 20 d.press.any.key.
----------------------------[ CPU ]----
AX: 0000 BX: 0000 CX: 0018 DX: 0011
SI: 39F0 DI: 0020 SP: FF80 BP: 0000
CS: 1000 DS: 1000 ES: 1000 SS: 1000
IP: 13C9 RIP:000013C9
CS:IP: 1000:13C9 (0x113C9)
SS:SP: 1000:FF80 (0x1FF80)
SS:BP: 1000:0000 (0x10000)
----------------------------[ CPU Control Register]----
cr0 0x10 [ ET ]
----------------------------[ eflags]----
OF <0> DF <0> IF <0> TF <0> SF <0> ZF <0> AF <0> PF <1> CF <0>
ID <0> VIP <0> VIF <0> AC <0> VM <0> RF <0> NT <0> IOPL <0>
---------------------------[ CODE ]----
0x113c9 <protected_mode_jump+31>: mov %rdx,%cr0
0x113cc <protected_mode_jump+34>: data16 (bad)
0x113ce <protected_mode_jump+36>: int3
0x113cf <protected_mode_jump+37>: xor %al,(%rcx)
0x113d1 <protected_mode_jump+39>: add %dl,(%rax)
0x113d3 <protected_mode_jump+41>: add %ah,0x55(%rsi)
0x113d6 <number+2>: push %di
0x113d8 <number+4>: push %si
0x113da <number+6>: push %bx
0x113dc <number+8>: sub $0x5c,%sp
0x00000000000013c9 in ?? ()
(gdb) info registers cr0
cr0 0x10 [ ET ]
(gdb) si
---------------------------[ STACK ]---
13AA 0000 0000 0000 11D8 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
----------------------------[ CPU ]----
rax 0x100000 1048576
rbx 0x10000 65536
rcx 0xf0000018 4026531864
rdx 0x11 17
rsi 0x139f0 80368
rdi 0x20 32
rbp 0x0 0x0
rsp 0xff80 0xff80
rip 0x13cc 0x13cc
eflags 0x6 [ IOPL=0 PF ]
cs 0x1000 4096
ss 0x1000 4096
ds 0x1000 4096
es 0x1000 4096
fs 0x0 0
gs 0xffff 65535
----------------------------[ CPU Control Register]----
cr0 0x11 [ ET PE ]
----------------------------[ eflags]----
OF <0> DF <0> IF <0> TF <0> SF <0> ZF <0> AF <0> PF <1> CF <0>
ID <0> VIP <0> VIF <0> AC <0> VM <0> RF <0> NT <0> IOPL <0>
---------------------------[ CODE ]----
=> 0x13cc: add %al,(%rax)
0x13ce: add %al,(%rax)
0x13d0: add %al,(%rax)
0x13d2: add %al,(%rax)
0x13d4: add %al,(%rax)
0x13d6: add %al,(%rax)
0x13d8: add %al,(%rax)
0x13da: add %al,(%rax)
0x13dc: add %al,(%rax)
0x13de: add %al,(%rax)
0x00000000000013cc in ?? ()
(gdb) si
---------------------------[ STACK ]---
13AA 0000 0000 0000 11D8 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
----------------------------[ CPU ]----
rax 0x100000 1048576
rbx 0x10000 65536
rcx 0xf0000018 4026531864
rdx 0x11 17
rsi 0x139f0 80368
rdi 0x20 32
rbp 0x0 0x0
rsp 0xff80 0xff80
rip 0x130cc 0x130cc
eflags 0x6 [ IOPL=0 PF ]
cs 0x10 16
ss 0x1000 4096
ds 0x1000 4096
es 0x1000 4096
fs 0x0 0
gs 0xffff 65535
----------------------------[ CPU Control Register]----
cr0 0x11 [ ET PE ]
----------------------------[ eflags]----
OF <0> DF <0> IF <0> TF <0> SF <0> ZF <0> AF <0> PF <1> CF <0>
ID <0> VIP <0> VIF <0> AC <0> VM <0> RF <0> NT <0> IOPL <0>
---------------------------[ CODE ]----
=> 0x130cc: mov %ecx,%ds
0x130ce: mov %ecx,%es
0x130d0: mov %ecx,%fs
0x130d2: mov %ecx,%gs
0x130d4: mov %ecx,%ss
0x130d6: add %ebx,%esp
0x130d8: ltr %di
0x130db: xor %ecx,%ecx
0x130dd: xor %edx,%edx
0x130df: xor %ebx,%ebx
51 movl %ecx, %ds
(gdb) info registers cr0
cr0 0x11 [ ET PE ]