FakeFtp
This is a gem that allows you to test FTP implementations in ruby. It is a minimal single-client FTP server that can be bound to any arbitrary port on localhost.
Why?
We want to ensure that our code works, in a way that is agnostic to the implementation used (unlike with stubs or mocks).
How
FakeFtp is a simple FTP server that fakes out enough of the protocol to get us by, allowing us to test that files get to their intended destination rather than testing how our code does so.
Installation
For Ruby version under 2.3.0
# Gemfile
gem 'fake_ftp', ~> '0.2.0'
# Gem install
gem install fake_ftp -v 0.2.0
Ruby version is 2.3.0 or above
gem 'fake_ftp'
# or
gem install fake_ftp
Usage
To test passive upload:
require 'fake_ftp'
require 'net/ftp'
server = FakeFtp::Server.new(21212, 21213)
## 21212 is the control port, which is used by FTP for the primary connection
## 21213 is the data port, used in FTP passive mode to send file contents
server.start
ftp = Net::FTP.new
ftp.connect('127.0.0.1', 21212)
ftp.login('user', 'password')
ftp.passive = true
ftp.put('some_file.txt')
ftp.close
expect(server.files).to include('some_file.txt')
expect(server.file('some_file.txt').bytes).to eq 25
expect(server.file('some_file.txt')).to be_passive
expect(server.file('some_file.txt')).not_not be_active
server.stop
To test active upload:
server = FakeFtp::Server.new(21212)
## 21212 is the control port, which is used by FTP for the primary connection
## 21213 is the data port, used in FTP passive mode to send file contents
server.start
ftp = Net::FTP.new
ftp.connect('127.0.0.1', 21212)
ftp.login('user', 'password')
ftp.passive = false
ftp.put('some_file.txt')
ftp.close
expect(server.files).to include('some_file.txt')
expect(server.file('some_file.txt').bytes).to eq 25
expect(server.file('some_file.txt')).to be_active
expect(server.file('some_file.txt')).to_not be_passive
server.stop
Note that many FTP clients default to active, unless specified otherwise.
Caveats
This is not a real FTP server and should not be treated as one. The goal of this gem is not to create a thread-safe multi-client implementation. It is best used to unit test code that generates files and transfers them to an FTP server.
As such, there are some things that won't be accepted upstream from pull requests:
- simultaneous multi-client code
- persistence support
- binding to arbitrary IPs
- global state beyond that required to pass the minimum required to generate passing tests
Recommendations for testing patterns
Separate configuration from code. Do not hard code the IP address, FQDN or port of an FTP server in your code. It introduces fragility into your tests. Also, the default FTP port of 21 is a privileged port, and should be avoided.
Separate the code that generates files from the code that uploads files. You tests will run much more quickly if you only try to upload small files. If you have tests showing that you generate correct files from your data, then you can trust that. Why do you need to upload a 20M file in your tests if you can stub out your file generation method and test file upload against 10 bytes? Fast fast fast.
References
- http://rubyforge.org/projects/ftpd/ - a simple ftp daemon written by Chris Wanstrath
- http://ruby-doc.org/stdlib/libdoc/gserver/rdoc/index.html - a generic server in the Ruby standard library, by John W Small