/snxvpn

Command-line utility to connect to a Checkpoint SSL VPN

Primary LanguagePythonOtherNOASSERTION

SNX-VPN

By Ralf Schlatterbeck

This is a project to connect to a Checkpoint SSL-VPN from a Linux client. The current version of checkpoint SNX (SSL Network Extender) for Linux no longer supports a command-line mode. The supported version involves a Browser with Java and is heavily dependent on the correct Java version and other configuration options in the Browser. Moreover it seems to only work with the Mozilla browsers (Firefox) not with others like Chrome. Last not least Java and the Browser like to die frequently.

The current Checkpoint solution still depends on a command-line utility called snx that needs root privileges and is installed either via automatic download (and install) from Java or by hand. The web-page for the SSL-VPN usually supports download of the correct snx-version for that endpoint for manual installation.

In the new solution the snx binary is called with the undocumented -Z Option. In that mode it does not do the password negotiation (which is done via the browser) but is only used for setting up the VPN connection.

This project is an attempt to duplicate the Browser-based login with a standalone program (in python) to get rid of all the Java version and Browser intergration headache. We still rely on the snx binary by Checkpoint which is called with the undocumented -Z option.

So far this is working for me with a Checkpoint SSL that uses username and password authentication and in addition a one-time password transmitted via SMS to the telephone of the person trying to connect. If you're using certificate-based login or other methods, this will probably not work for you out-of-the-box but you may want to help me make it work.

Install and Run

Install via pip is the preferred way (replace pip with pip3 if you want to install for python3):

pip install snxvpn

The following dependencies are needed but should be picked up automagically if you install via pip:

  • Beautiful Soup version 4 (python-bs4 Debian package)
  • pycrypto (python-crypto Debian package)

After installation you should be able to run snxconnect --help to find out about options. At least a host, and username must be given, either on the command-line via options or in a config file (see below).

The snxconnect program will currently create two files in the current working directory where the program is started:

  • snxanswer: The not-yet-reverse-engineered answer of Checkpoint's snx program to the caller, only created if the --debug option is given
  • $HOME/.snxcookies: The cookies from the remote end in the format known from the perl LWP library (available in python as LWPCookieJar), this is only created if the --save-cookies option is given. The default cookie filename can be changed with the --cookiefile option.

If a cookie file is found, snxconnect tries to reconnect without asking for a password. This can be used if the connection has died prematurely before the connection time ran out. And, yes, it might be a security risk to save cookies to disk, so you have to explicitly enable this feature by setting save-cookies true in the config file or giving the --save-cookies option. Note that the cookies of course only have a limited lifetime and your connection isn't very secure if you cannot be sure of the files on your disk. Moreover all users of the current machine can access the VPN connection anyway.

When you run Checkpoints snx for the first time with snxconnect it creates an X-Windows popup that lets you confirm the server fingerprint. I've not seen this popup with the Java framework (but Java died several times during my first experiments which is one of the reasons I wrote snxvpn, so that might be the reason I hadn't seen the popup before). You have to confirm this popup. The server fingerprint is stored into a file with extension .db in /etc/snx.

For configuration, snxconnect accepts a config file $HOME/.snxvpnrc. The options there are the command-line long options (obtained with --help) where a '-' is replaced with '_'. For compatibility with .snxrc, the keyword server is an alias for host. You can see which options were picked up from the config-file by specifying --help, where defaults are displayed, the defaults from the config-file are displayed. Command-line options take precedence over config-file entries.

In addition a .netrc file is supported that can contain username and password by host name. Note that storing long-term login credentials on disk is a security risk. See the manual page for netrc for further details.

To install from source (from a git checkout) you need my sfreleasetools from Sourceforge. This adds the necessary Makefile includes to create the snxvpnversion.py from the git tag containing the latest version number. You can either install sfreleasetools in a sibling directory of snxvpn called releasetools or set the environment variable RELEASETOOLS pointing to your cloned version. You also need the rst2html command provided by docutils, on Debian Linux you can obtain it by installing the python-docutils package.

Once this is installed, call make without arguments. This will create the snxvpnversion.py which is used by the setup.py script.

Once the snxvpnversion.py has been created, the snxvpn package can be installed with normal:

python setup.py install --prefix=/usr/local

Notes on snx Installation

From many posts on various mailinglists and forums, it is clear that installing snx isn't straightforward. You need some non-standard libraries installed that snx needs to function. Moreover snx is a binary for the i386 architecture, not a modern 64-bit AMD/Intel architecture. I can only give hints for Debian installation here but the general steps will apply to other distributions, too.

Obtaining the snx binary in the first place can usually be achieved by connecting via web-browser to the SSL-VPN site via the browser, log in and (in my installation here at least) look in the Settings (in german Einstellungen) menu for an entry native application settings or similar (german "Native Anwendungseinstellungen bearbeiten"). In this menu I do have links for manual download of snx for Linux and Mac-OS.

First of all if you're on a 64-bit architecture (called amd-64 at least by Debian) you need to enable multi-architecture support with:

dpkg --add-architecture i386
apt-get update

Then you need to install some packages that contain libraries needed by snx, notably:

  • libstdc++5:i386
  • libxcb1:i386
  • libaudit1:i386
  • libgcc1:i386
  • libxau6:i386
  • libxdmcp6:i386

To check if you have all necessary libraries, you can run ldd on the snx binary (with sudo to root):

sudo ldd /usr/bin/snx

This should list a library file for each line and should not report any missing libraries.

Some Notes on the Mechanisms

This section discusses some of the internals of how the snx program is called by the Java framework and snxconnect.

The Login process via the browser is a standard login page with lots of Javascript and redirects. Passwords are sent in encrypted form to the VPN gateway. The encryption uses a 2048 bit RSA key and pads the password with random data before encryption (this is good). During login the browser (or this program) picks up a lot of cookies and can access necessary login information via Javascript. This information includes:

  • RSA public key for the password encryption
  • Username to be passed to snx
  • A one-time password (different from the one received via telephone) to be passed to snx
  • Host name for TLS connection
  • Port for TLS connection
  • A server fingerprint

All these (except the RSA key) are passed to the snx program for establishing the connection. The connection might use PPP internally as some of the error messages (which are sent as part of the i18n info in Javascript and map the error codes of snx to human-readable messages) suggest.

If you call snx with the undocumented -Z option by hand, it will terminate immediately. It obviously has other checks in place if it is called "correctly". To call snx correctly with this option, snx expects that standard input, output and error are UNIX pipes. Only if something goes wrong and snx dies with an error-message, these pipes are ever used. After startup, snx checks the existence of a logfile and creates it if it doesn't exist or is not locked by another snx process. Then it creates some other lockfiles in /etc/snx/tmp and then immediately forks a child process and lets the parent process terminate. This forking and terminating sends the child process to the background. The first step the child process does is close the file-descriptors for standard input, output, and error.

After this, snx opens and listens on a TCP socket on port 7776 on the local machine. I haven't found options for telling snx to use another port. The calling application (e.g., snxconnect or the original Java framework) is expected to pass the connection information detailed above in an undocumented binary format. After that snx establishes a VPN connection and reports back with another blob of binary information on the same socket. The socket must then be kept open by the calling application, otherwise snx terminates. It may well be that snx accepts further commands on that socket, e.g., for renewing the authentication after the VPN timeout has expired. We log the binary data received on that socket to the file snxanswer if debugging is enabled.