/Stellar-M3_Epaper

E-paper base on Stellar-M3 (hanshuo).

Primary LanguageCGNU General Public License v3.0GPL-3.0

E-ink

E-ink software CCS project for Stellar-M3

Hardware

Stellar-M3: HS_EL5102-1M_55_02 A Electronic Shelf Lable (ESL) producted by Zhejiang Hanshow Technology Co.,LTD.

MCU: CC2640R2F

E-paper: DEPG0213RHS75AF1CP (SSD1675B)

CC2640R2_STELLAR_M3_A.jpg CC2640R2_STELLAR_M3_B.jpg

Connection

CC2640R2F Stellar-M3 NotesC
DIO_19 SDA e-paper screen interface
DIO_18 CK e-paper screen interface
DIO_12 CS e-paper screen interface
DIO_11 DC e-paper screen interface
DIO_10 RST e-paper screen interface
DIO_9 BUSY e-paper screen interface
DIO_20 POWER_ON power on the e-paper screen or not
DIO_21 or DIO_13 ? Reed Switch will read 0 if there is a magnet near
DIO_6 ? RED LED low active
DIO_7 ? GREEN LED low active
DIO_0 ? BLUE LED low active

Prepare for the CCS project

  • Install the simplelink_cc2640r2_sdk_5_30_00_03 from TI.
  • Install the CCS Version: 9.1.0.00010 from TI.
  • Copy all the files under /simplelink_cc2640r2_sdk_5_30_00_03 to your <SDK_INSTALL_DIR>.
  • Import all the CCS projects from /src to your CCS workspace.