ChrisGeorgakidis
PhD Candidate at University of Thessaly Research Assistant at Circuits and Systems Lab UTH (CASlab)
Circuits and Systems Lab UTHVolos, Greece
Pinned Repositories
Advanced-Communication-Systems
CE542
DHT22---XBEE-Communication
This project implements a communication between a XBee programmable device and a DHT22 Temperature and Humidity Sensor using 1-Wire Protocol.
Gray_Counter
High-Performance-Computing
High Performance Computing Labs
LCD-Controller-Implementation
This is a Verilog Implementation of LCD Controller.
Matrix-Vector-Multiplication
This is a project within the university lesson "SoC Design with CAD tools"
Non_Restoring_Divider-Modulo
Quadratic-Equation-MAC
Seven-Segment-Display
This project is part of the lesson CE469 Digital Systems Lab
UART-Implementation
A UART Implementation in Verilog
ChrisGeorgakidis's Repositories
ChrisGeorgakidis/DHT22---XBEE-Communication
This project implements a communication between a XBee programmable device and a DHT22 Temperature and Humidity Sensor using 1-Wire Protocol.
ChrisGeorgakidis/Matrix-Vector-Multiplication
This is a project within the university lesson "SoC Design with CAD tools"
ChrisGeorgakidis/Advanced-Communication-Systems
CE542
ChrisGeorgakidis/Gray_Counter
ChrisGeorgakidis/High-Performance-Computing
High Performance Computing Labs
ChrisGeorgakidis/LCD-Controller-Implementation
This is a Verilog Implementation of LCD Controller.
ChrisGeorgakidis/Non_Restoring_Divider-Modulo
ChrisGeorgakidis/Quadratic-Equation-MAC
ChrisGeorgakidis/Seven-Segment-Display
This project is part of the lesson CE469 Digital Systems Lab
ChrisGeorgakidis/UART-Implementation
A UART Implementation in Verilog
ChrisGeorgakidis/UdacityAndroidProjects
ChrisGeorgakidis/UPSET
UPSET is an automated framework for performing SET Analysis and Optimisation for VLSI circuits utilising Static Timing Analysis principles
ChrisGeorgakidis/VGA-Controller-Implementation
A VGA Controller Implementation in Verilog
ChrisGeorgakidis/XBee-Gateway-Traffic-Visualisation-
An XBee device is operating as a gateway and it will collect the data that are sent by other devices. Next it will parse the data and pass them through serial port. Then a GUI read the serial port communication and visualise the devices and the data that the specific one has sent.