Minimal gcc makefile project for STM32F411xE
This contains the absolute bare minimum needed to compile a blinky example for the STM32F411xE on the command line with gcc and make and then flash it to the demo board with OpenOCD. It is using the original headers provided by STM and ARM but only those for the core and peripheral registers, none of the HAL or any other optional libs.
The startup code has been implemented from scratch and without the Atollic copyright, the startup code and the SystemInit have been implemented in plain C and are in the file gcc_startup_system.c.
Usage
Prerequisites
- install Linux on your PC
- get a NUCLEO-F411RE demo board from STMicroelectronics
- install the official arm-none-eabi-gcc toolchain from Launchpad
- install OpenOCD
Build and run
- clone this repository
- connect the NUCLEO board
$ make install- watch the green LED blink while studying the reference manual
happy hacking :-)