ClaudioVertemara's Stars
stm32-hotspot/STM32WB-BLE-PER-Testbench
Example demonstrates how to enable BLE Direct Test Mode (DTM) in the STM32WB from a firmware user application using HCI testing commands directly to perform a Packet Errror Rate (PER) measurement
STMicroelectronics/stm32-mw-openbl
Provides the Open Bootloader library, part of the STM32Cube MCU Component "middleware", for all STM32xx series.
stm32-hotspot/STM32CubeRF-Flow
The STM32CubeRF-Flow is a Python application example that demonstrates how to automate RF Testing
stm32-hotspot/STM32WB55-TM-RTT
Application example based on the BLE_TransparentMode application found in the STM32CubeWB firmware package.
stm32-hotspot/STM32WB15-TM-RTT
An application example based on the BLE_TransparentMode application found in the STM32CubeWB firmware package.
stm32-hotspot/STM32WB55-HSE-CALIB-RTT
An application example based on the RCC_HSE_Calib application found in the X-CUBE-CLKTRIM expansion package.
stm32-hotspot/STM32WB15-HSE-CALIB-RTT
An application example based on the RCC_HSE_Calib application found in the X-CUBE-CLKTRIM expansion package.
stm32-hotspot/STM32WL-LoRaWAN-MQTT-Android
This Android app serves as an example of using the MQTT network protocol to retrieve sensor data from devices connected to the same MQTT network. It allows users to log-in and connect to the [Things Network](https://www.thethingsnetwork.org). From there, the user can add multiple devices using their device ID and view the latest sensor data from each device.
stm32-hotspot/STM32WB-BLE-Dev-App-Android
Application created in Android Studio by ST Microelectronics for mobile devices running Android. The app is split into two parts: scanning & connection. In the scanning phase, the user can scan for nearby Bluetooth devices, filter scanning by device name or RSSI value, and read a device's raw & parsed advertising data. Once connected to the BLE device, the user will see a list of the device's BLE services & characteristics. The user can then use the read, write, & notify functionality on each supported characteristic.
STMicroelectronics/STM32CubeWL
STM32Cube MCU Full FW Package for the STM32WL series - (HAL + LL Drivers, CMSIS Core, CMSIS Device, MW libraries plus a set of Projects running on boards provided by ST (Nucleo boards)
STMicroelectronics/STM32CubeWB
Full Firmware Package for the STM32WB series: HAL+LL drivers, CMSIS, BSP, MW, plus a set of Projects (examples and demos) running on all boards provided by ST (Nucleo, Evaluation and Discovery Kits).
stm32-hotspot/STM32WB-BLE-PER-Testbench-Android
STM32WB-BLE-PER-Testbench Android app used with the STM32WB-BLE-PER-Testbench project. Allows users to setup and monitor a Bluetooth PER test between two STM32WB devices.
stm32-hotspot/STM32WB-BLE-Motor-Control-SDK-Android
This Android app allows a user to connect to a ST Nucleo-WB55 board with a motor attached to it and control the motor’s speed (RPM) and direction through Bluetooth. On connection, the app will request the min & max motor speeds to use as limits and through out the connection it will periodically request the current motor speed every 100ms to display to the user. A live time-log is also available to view the application & Bluetooth activities.