CobraPi/Klipper-Firmware-FLSUN-QQ-S-Pro-Delta-Printer

Issues

• QQs vs QQs pro

  #20 opened 3 years ago by NunoFilipePereira
  4

• mainsailos on Raspberry Pi 4 does not have confiug files

  #28 opened 9 months ago by nickr1957
  0

• Move out of range

  #27 opened 10 months ago by lightdream68
  2

• Use more than 5 probe points for BED_MESH_CALIBRATE

  #26 opened a year ago by beebenutz
  1

• Running stock tft screen

  #22 opened 2 years ago by masterviana
  1

• Firmware for QQ-S Pro with GD32 chip?

  #23 opened a year ago by wesblake
  1

• QQSP Touchscreen Functionality post Klipper FW?

  #25 opened a year ago by beebenutz
  3

• Firmware update not working.

  #24 opened a year ago by beebenutz
  0

• TMC2208 a la place de TMC2209 problème de déconnection lorsque du home, en config stock les moteur sont inverser

  #21 opened 2 years ago by erkan377
  0

• Option 'uart_pin' in section 'tmc2209 stepper_a' must be specified

  #13 opened 3 years ago by Xcat2008
  4

• Vref pin configuration missing from the qq-s stock configuration file

  #14 opened 3 years ago by shamilabw
  2

• Q5 robin nano

  #7 opened 3 years ago by WeirdosNat
  2

• PROBE_CALIBRATE

  #19 opened 3 years ago by qkpony
  6

• README.md: kiauh not installed

  #16 opened 3 years ago by RobbyBer
  0

• QQ-S Pro Movement Distance is Off

  #18 opened 3 years ago by Mousedroid98
  2

• Step 4 - Calibrating the printer (Stock Example)

  #15 opened 3 years ago by RobbyBer
  0

• No com port and errors in the .cfg

  #11 opened 3 years ago by pingywon
  10

• Issues running your configuration on FLSun QQ-S Pro

  #8 opened 3 years ago by mifrendjim
  6

• Baud unstable

  #3 opened 4 years ago by BugsonPL
  3

• Slightly confusing stock probe calibration

  #1 opened 4 years ago by oemsysadm
  1