micropython_ir
MicroPython on esp32 use IR
Usage
- 1.板子刷好MicroPython
- 2.连接好红外传感器 注意区 发射器和接收器的 针脚
- 2.上传ir.py
# 初始化
# gpio 23 为接收针脚 gpio22为发送针脚 如果只有发射或者接收就只传入对应的针脚
# ir_helper = IRHelper(rx_gpio=23, tx_gpio=22)
# 录制信号
# ir_helper.record_cmd()
# 录制的信号默认将保存在 buttomCMD.txt
# 发送信号
# ir_helper.send_cmd('on')Acknowledgements
We would like to thank the following projects for their contributions to this project:
- micropython_espX_IR_Transceiver:micropython_espX_IR_Transceiver