ConstantinoSchillebeeckx/tacocat-keyboard

Issues

• keyboard

  #16 opened 7 years ago by ConstantinoSchillebeeckx
  0

• 4 pins instead of 5 on I2C connection

  #15 opened 7 years ago by ConstantinoSchillebeeckx
  0

• mounting holes

  #14 opened 7 years ago by ConstantinoSchillebeeckx
  0

• enlarge LED pads to make easier solder

  #12 opened 7 years ago by ConstantinoSchillebeeckx
  0

• PCB BOM

  #6 opened 7 years ago by ConstantinoSchillebeeckx
  0

• shift esp32 away from edge

  #13 opened 7 years ago by ConstantinoSchillebeeckx
  0

• move power cap between ESP32 and LEDs

  #10 opened 7 years ago by ConstantinoSchillebeeckx
  0

• move diode - in the way of switch

  #11 opened 7 years ago by ConstantinoSchillebeeckx
  0

• TODO

  #1 opened 7 years ago by ConstantinoSchillebeeckx
  0

• voltage regulator

  #7 opened 7 years ago by ConstantinoSchillebeeckx
  0

• longer pads on micro usb connector for easier soldering

  #4 opened 7 years ago by ConstantinoSchillebeeckx
  0

• ensure I2C micro usb compatible as power source

  #9 opened 7 years ago by ConstantinoSchillebeeckx
  1

• micro USB update

  #5 opened 7 years ago by ConstantinoSchillebeeckx
  0

• symmetric pin assignment layout

  #8 opened 7 years ago by ConstantinoSchillebeeckx
  0

• I2C bus requires pull-up resistors

  #3 opened 7 years ago by ConstantinoSchillebeeckx
  6

• Feature ideas

  #2 opened 7 years ago by ConstantinoSchillebeeckx
  0