MAG3110 3-Axis Digital Magnetometer Electronic Compass
The MAG3110 is a digital 3-axis magnetometer.
This Device is available from ControlEverything.com [SKU: MAG3110_I2CS]
https://www.controleverything.com/content/Compass?sku=MAG3110_I2CS
This Sample code can be used with Raspberry Pi, Arduino, Beaglebone Black and Onion Omega.
Download and install pi4j library on Raspberry pi. Steps to install pi4j are provided at:
Download (or git pull) the code in pi.
Compile the java program.
$> pi4j MAG3110.java
Run the java program as.
$> pi4j MAG3110
Download and install smbus library on Raspberry pi. Steps to install smbus are provided at:
https://pypi.python.org/pypi/smbus-cffi/0.5.1
Download (or git pull) the code in pi. Run the program
$> python MAG3110.py
Download and install Arduino Software (IDE) on your machine. Steps to install Arduino are provided at:
https://www.arduino.cc/en/Main/Software
Download (or git pull) the code and double click the file to run the program.
Compile and upload the code on Arduino IDE and see the output on Serial Monitor.
Setup your BeagleBone Black according to steps provided at:
https://beagleboard.org/getting-started
Download (or git pull) the code in Beaglebone Black.
Compile the c program.
$>gcc MAG3110.c -o MAG3110
Run the c program.
$>./MAG3110
Get Started and setting up the Onion Omega according to steps provided at :
https://wiki.onion.io/Get-Started
To install the Python module, run the following commands:
opkg update
opkg install python-light pyOnionI2C
Download (or git pull) the code in Onion Omega. Run the program.
$> python MAG3110.py
To download Windows 10 IoT Core, visit Get Started page
https://developer.microsoft.com/en-us/windows/iot/GetStarted
Download (or git pull) the sample, make a copy on your disk and open the project from Visual Studio.
Note: Your IoT Core device and development PC should be connected to same local Network.
#####The code output is raw value of magnetic field in X, Y and Z axis