TMG39931 Color, ALS and Proximity Sensor
The TMG39931 provides color, IR light sensing and proximity using I²C communications.
This Device is available from ControlEverything.com [SKU: TMG39931_I2CS]
https://www.controleverything.com/content/Color?sku=TMG39931_I2CS
This Sample code can be used with Raspberry Pi, Arduino, Beaglebone Black and Onion Omega.
Download and install pi4j library on Raspberry pi. Steps to install pi4j are provided at:
Download (or git pull) the code in pi.
Compile the java program.
$> pi4j TMG39931.java
Run the java program.
$> pi4j TMG39931
Download and install smbus library on Raspberry pi. Steps to install smbus are provided at:
https://pypi.python.org/pypi/smbus-cffi/0.5.1
Download (or git pull) the code in pi. Run the program.
$> python TMG39931.py
Download and install Arduino Software (IDE) on your machine. Steps to install Arduino are provided at:
https://www.arduino.cc/en/Main/Software
Download (or git pull) the code and double click the file to run the program.
Compile and upload the code on Arduino IDE and see the output on Serial Monitor.
Download (or git pull) the code in Beaglebone Black.
Compile the c program.
$>gcc TMG39931.c -o TMG39931
Run the c program.
$>./TMG39931
Get Started and setting up the Onion Omega according to steps provided at :
https://wiki.onion.io/Get-Started
To install the Python module, run the following commands:
opkg update
opkg install python-light pyOnionI2C
Download (or git pull) the code in Onion Omega. Run the program.
$> python TMG39931.py
#####The code output is the proximity and lux value of IR and RGB luminance.