Ultitrio (3v3 TF2 Competitive Format)

UltiTrio_Logo_WatermarkedSmall

What is Ultitrio?


Ultitrio (previously called Ultiduo + 1) is a new 3v3 competitive format created by Coolstuff that consists of Soldier, Medic, and Scout. Good Ultitrio maps consist of lots of mobility opportunities for all 3 classes and less punishment for getting knocked off of the point. The addition of Scout is to add more dynamic gameplay for both teams. Before the finalization of the roster, Demoman was considered in place of Scout, but being as most Ultiduo maps have 2 exits and close quarters, Demoman would be able to lock down every inch of a map for free and subsequently deny everyone, so Scout was chosen for his flexibility and high mobility. With the addition of Scout, it allows for more strategic gameplay because of Scout's added dynamic play styles with weapons like the Fan O' War and Wrap Assassin, leaving Soldier to be more of a "clean up" class after a Scout marks someone or hits that player with a Wrap Assassin ball. Not only that, it's possible to split up your team to perform pincer maneuvers with Soldier and Medic pushing on one side and a fully buffed Scout pushing on the other, which became a common theme in our testing.

While Ultitrio is still in the testing phases for a whitelist and as a competitive format in general, in limited testing, its more dynamic small team roster allows it to serve as a good bridge between the formats Ultiduos and 4s as it's very heavily DM skill-based, much like Ultiduos.

Ultitrio Maps / Map Downloads

The Ultitrio maps have moved from the GitHub to the mirrors listed below

Mirror 1 (Google Drive): https://drive.google.com/drive/folders/18aRkMDzFIwUghQCxJvxXwLD7lCt8vGs6?usp=sharing

Mirror 2 (Dropbox): https://www.dropbox.com/scl/fo/26s7lrpa3z59h1zi1ztbo/h?rlkey=km9kxwngpx3mtpzjaos0lc4kv&dl=0

Join the Ultitrio Official Discord for updates, news, and PUGs! https://discord.gg/CtGdA3fbRq

Installation instructions:

Step 1: Navigate to the following path in your TF2 server using your browser or FTP/SFTP client of choice, "\tf\cfg".

Step 2: Extract all of the repositories' contents to your Desktop or another readily available workspace on your computer.

Step 3: Copy and paste all the config and whitelist files to "\tf\cfg".

Step 4: Reboot your TF2 server and then you're done!

A bit on the configs for beginners:

It's important to remember to not exec the ultitrio_base config at all. This is used to set up all other required commands for the Ultitrio format, nothing more nothing less. Only exec the "ultitrio_match" or "ultitrio_scrim" varient. When finished, exec the ultitrio_off config to remove all of the config's changes.

To exec configs:

Step 1: Either rcon into your server using TF2's console or use the console in your server hoster (if any)

Step 2: Type in "exec ultitrio_scrim" for the best of 3 varrient or "exec ultitrio_match" for the best of 7 gamemode varrient.

Step 3: Profit? No, fraggage and destruction. Go have fun!

Step 4: Once you are done, type "exec ultitrio_off" and that reverts your server to normal. If you have issues with the whitelist, see below.

Note: If you're having whitelist issues, make sure you DO NOT use "map" to change maps but use "changelevel" instead, you will need to do "changelevel" every time you exec a new whitelist because source is funny lmao.

All credit goes to the original creators.

Lil' Boneless Pizza for the graphic design of the logo, Whitelist.tf for the whitelist, all original map creators, Sweglord227 for config rewrites, and to FountainMann for encorangement during the testing stages :D