CrealityOfficial/Creality_Sonic_Pad

print out of range

Opened this issue · 3 comments

vinaysamudrala commented

Getting print out of range error with Ender 3S-1 pro in sonic pad after the print is getting completed.
List of errors after completion of print:

  1. All the 3 axes motors are staying in the same position with motors in the lock position just above the print.
  2. Hot end and heat bed are staying hot even after the print completes. (causing extruder jam leading expanding of PLA filament at the inlet PTFE tube of the extruder)
  3. Videos are unable to save after the completion of the print.
  4. Showing an out-of-range error after the print.
  5. print is stopping randomly by displaying print out of range in the middle of the print(mostly occurring in the 1st layer).
beroliv commented

pls check if your slicer is set to the same bed size like your printer! if your slicer is set to big then you will have this issue!

vinaysamudrala commented

pls check if your slicer is set to the same bed size like your printer! if your slicer is set to big then you will have this issue!

Tq,
To utilize max volume I have changed some settings.

Issue solved.

BradGillies commented

I have this same issue. It started after the last softrware update on the sonic pad. Parameters for the printer have not changed but am getting this error after every print.
Mine is an ender 3V2 with the Sprite pro extruder and hotend. I am not sure which axis is going out of range but the print head is well within range when it stops.