CrealityOfficial/Creality_Sonic_Pad

Issues

• BUG** Firmware does not generate if Communication interface is not set to USB

  #110 opened 5 months ago by rocket59
  3

• Sonic Pad camera low frame rate (C270)

  #109 opened 5 months ago by rocket59
  0

• Feature Request: Auto-Home After Print Interruption Detected, but Before Nozzle Re-heating.

  #107 opened 6 months ago by 5mmTech
  0

• Connecting Spoolman to Sonic Pad

  #105 opened 6 months ago by laufantn
  2

• Ender 5 Plus printer_configuration - add/update for GD-chipped 4.2.2 MCU.

  #103 opened 6 months ago by ThunderClap86
  1

• Latest firmware no longer allows printing from sonic pad interface

  #65 opened a year ago by FilthyMick
  3

• the printer pauses after the initial gcode only on the first print after power on

  #96 opened 9 months ago by Nocentinia
  0

• Update this repository with latest fixes

  #95 opened 9 months ago by bistory
  0

• Please update Moonraker

  #87 opened a year ago by ale-ben
  5

• wpa_supplicant.conf is erased if wifi network is unavailable

  #93 opened 9 months ago by myNameIsAdhara
  0

• Ender 3v2 with bl touch and Spirite pro

  #92 opened 9 months ago by YaL11
  0

• Ender 7

  #90 opened 10 months ago by Frits183
  0

• Sonic Pad loses WiFi Config, then starts prints at random % and errors out.

  #88 opened 10 months ago by BloodSteyn
  0

• !! Move out of range:

  #83 opened a year ago by Tarnakarlslund
  1

• File system acts as corrupted

  #85 opened a year ago by Escrich
  2

• Connector located at Sonic Pad’s back, pinout

  #86 opened a year ago by Escrich
  0

• Is it possible to delete a single printer without make a factory reset?

  #84 opened a year ago by Escrich
  1

• G-Code viewer don't shows the real bed measures

  #46 opened a year ago by Escrich
  1

• GPL license violation!

  #82 opened a year ago by thijstriemstra
  0

• Laser engraving support missing from Creality

  #81 opened a year ago by thomazff
  0

• Wierd noise from the extruder when changing to silk PLA

  #77 opened a year ago by Jimmyjohhny
  0

• Blue covering on being printed part does not appear anymore

  #74 opened a year ago by Escrich
  2

• Restart issue of ender 3 s1 pro

  #73 opened a year ago by vinaysamudrala
  1

• Self test for Ender5 S1 failed

  #76 opened a year ago by qnub
  2

• LPC1769

  #42 opened a year ago by parogc
  5

• print out of range

  #53 opened a year ago by vinaysamudrala
  3

• Please add a printer.cfg for Ender 3 PRO 4.2.7 with CRTOUCH and SPRITE PRO

  #72 opened a year ago by hardlevel
  2

• SONIC PAD IS BIG SHIT !!! IN THE WASTE AND BUY A BETTER PAD ???

  #71 opened a year ago by Toddi3D
  0

• How to make a Filament Change with Cura ???

  #64 opened a year ago by Toddi3D
  1

• Metadata not available for <>

  #69 opened a year ago by plugowski
  0

• Stop print from Sonic Pad, causes error on next print.

  #68 opened a year ago by plugowski
  0

• Resume after restart uses wrong temp

  #55 opened a year ago by FilthyMick
  1

• Moonraker dependency Apprise

  #63 opened a year ago by leafeven
  1

• Some files remains as read only files

  #67 opened a year ago by Escrich
  0

• Sound notifications on Sonic pad?

  #40 opened a year ago by BakeJake
  10

• Ambient Light error

  #51 opened a year ago by bobdivx
  1

• News Update ist Out but..... Where ist the Manual for Laser

  #41 opened a year ago by chuckxxxl
  6

• Creality PAD outdated.

  #44 opened a year ago by schmittm63
  3

• This feature from klipperscreen would be awesome and greatly appreciate by many im sure.

  #43 opened a year ago by BakeJake
  27

• Exclude Object crashes print

  #61 opened a year ago by blazecoding2009
  1

• M600 not working after latest Uodate

  #60 opened a year ago by Toddi3D
  0

• M600 is not working after the latest Update.

  #59 opened a year ago by Toddi3D
  0

• Auto Levelling

  #58 opened a year ago by Toddi3D
  0

• Heater bed error

  #57 opened a year ago by OkSingra
  0

• printing stops randomly

  #50 opened a year ago by droptic
  1

• Steppers too back in past

  #49 opened a year ago by blazecoding2009
  0

• Problems with Neptune 3 PRO

  #48 opened a year ago by Nocentinia
  0

• SonicPad doesn't save state of sorting for files.

  #47 opened a year ago by BakeJake
  1

• No option to compile for LPC mcu (LPC1768)

  #37 opened 2 years ago by Giorgiofossati
  1

• Only a single webcam is supported

  #39 opened a year ago by buffcode
  1