If you are new to Cytron Robo Pico and want to get started quickly, you are in the right place! Here you will find all the information you need to set up your hardware and software and start coding with the Cytron Robo Pico.
To get started, you will need the following hardware and software:
Hardware:
Software:
This repository includes code for CircuitPython, MicroPython, and Arduino.
- To install CircuitPython on the Raspberry Pi Pico or Pico W, you can download the firmware for CircuitPython on Pico or CircuitPython on Pico W.
- For MicroPython you can download firmware for MicroPython on Pico or MicroPython on Pico W.
- For Arduino you can follow this instruction to Install Arduino Board Manager.
For more information on the Robo Pico, check out the product page on the resources section:
Tutorial
Still new to Robo Pico or Raspberry Pi Pico, can visit the Getting Started Guide:
If you need further assistance, we welcome you to our technical forum or contact us through email support@cytron.io where our team will gladly assist you.
Let's start building with ROBO PICO!