We recommend to setup the IRIV PiControl with:
- Load the latest Raspberry Pi OS into the CM4 EMMC.
- Create an empty "ssh" file on /boot to enable ssh.
- Copy the userconf.txt file to /boot. This is to set the default username to "pi" and password to "raspberry".
- Boot up the IRIV PiControl, SSH into it and run the setup script using this command:
curl -L tinyurl.com/setup-iriv-pi-control | sudo bash
What the setup script does?
- Added the following settings in /boot/config.txt
- Disable USB OTG and enable the USB Host.
- Enable I2C and RTC.
- Changed the WiFi/Bluetooth antenna to external antenna
- Setup a script to run in the background to:
- Display the IP address and system informations on the OLED.
- Monitor the state of the power button. Shutdown the Pi safely when the button is pressed.