Welcome to the official repository for the Kraken Motor – a high-torque, powerful, and audibly impressive motor designed for a wide range of applications but not for the fain of heart.
- HardCase: Protecting the Heavy motor for shipping , and reducing the Carboard waste by providing a reusable box.
- The Kraken: a 60mm long NEMA17 with 40mm long [D Cut] shaft , equiped with internal thermistor [PT1000] to mesure the actual motor tempreture.
- Powge GT2 30T: A timing gear that utilize the Low-end tourqe sweet spot (you can use whatever match your setup needs).
- 6 wires cable: That includes the 2 white color thermistor cable [the ends are not crimped, allowing you to use what match your MCU setup]
- Voltage Range: Operates efficiently from 24V to 60V.
- Voltage AMP: Can go up to 3 AMP
- High Torque: Exceptional Power to handle heavy loads. Very high [low-end] torque >> download the torque curve and the Gear selector to check what suits your setup <<
- Low Vibration: Showed way lower vibration incompareson to other motors
- Audible Feedback: Loud operation indicating its monstrous performance.
NOTE:if you are buying more than 2 motors from Aliexpress >> SPLIT THE ORDER TO 2 ORDERS TO REDUCE SHIPPING BY NEARLY 50%
- Worldwide : D3vil Design store - Aliexpress
- Europe : Meltbro.com
- USA: PeeDee3d.com
- USA: Wattskraken.xyz
Check our channel for support and get a Discount per each motor you purchase [ up to 4 motors ] Kraken channel
For Collaboration and distribution kindly email Omranello@gmail.com / Omran@3difinity.com
Special Thanks to all those help in testing and supporting this project The team @ D3vil design and the pioneers who purchased the motor and took this opportunity to help refine thise product for the market and the community... THANK YOU!!
Austin Lee (Budz)
Derrick Darrell
Shima
Bryan smith (Zarboz)
Daniel Raine from Ferrari Italy
Philip from Meltbro
Steven from CRYD Team Germany