DCS-Skunkworks/dcs-bios-arduino-library

Issues

• Addresses.h is outdated

  #62 opened 4 months ago by charliefoxtwo
  0

• Problem uploading / verify code to arduino

  #61 opened 4 months ago by BarB310562
  0

• Syncronization

  #55 opened a year ago by kstrance
  6

• [BUG] : DcsBios::Potentiometer min & max values are not limiting the travel of the in-game lever

  #60 opened 4 months ago by psjshep
  5

• SwitchMultiPos not correctly accounting for PIN_NC and instead sends the PIN_NC value

  #57 opened 6 months ago by kbastronomics
  2

• ATmega32U4 supported as a RS485 Master/Slave

  #38 opened 2 years ago by kbastronomics
  9

• Release to PlatformIO registry

  #53 opened a year ago by michaelosthege
  0

• Bounty: RS485 support on STM32 with the official STM32duino core

  #45 opened a year ago by maciekish
  1

• RS485 with Interrupts

  #43 opened a year ago by maciekish
  0

• sendDcsBiosMessage sends only boolean values.

  #27 opened a year ago by Jacktherookie
  3

• MatrixSwitches.h should either be bracketed by #ifdef block in the DcsBios.h, or included by default

  #46 opened a year ago by icemarkom
  1

• Latest DCS Bios library "servo.h" library incompatible with ESP32 boards

  #48 opened a year ago by lesthegringo
  2

• TACAN mode selector switch - possible problems with 'new' DCS Dios script

  #47 opened a year ago by lesthegringo
  10

• Polling Issue when using latest version of DCS-BIOS v0.3.8

  #42 opened 2 years ago by byteman59
  6

• Can we get DCS BIOS RS485 going on STM Blue Pills - both master and slave?

  #28 opened 2 years ago by virtual812
  4

• Q (bug?): Garbled data on complex sketches - (concurrency?) isssue in DcsBiosNgRS485Slave.cpp.inc

  #41 opened 2 years ago by krorvik
  2

• STM32duino support with RS485

  #44 opened a year ago by maciekish
  0

• Arduino Nano Every requires workaround

  #40 opened 2 years ago by ColdFrontWI
  3

• AH-64D Fire panel Cover

  #39 opened a year ago by HNR3
  2

• STM32 Compile Issues

  #19 opened 3 years ago by speedbird5
  17

• Matrix2pos fuction guide

  #37 opened 2 years ago by Maxz2004
  0

• Lack of documentation about library itself...

  #26 opened 2 years ago by Jacktherookie
  3

• Dual concentric rotary encoder emulation feature?

  #24 opened 2 years ago by AerialElectron
  2

• Mega2560 as DCS BIOS slave - how to define which UART the MAX487 chip is on.

  #29 opened 2 years ago by virtual812
  0

• Possible STM32 support - pull available on original arduino library repo

  #7 opened 3 years ago by virtual812
  20

• Analog Multipos does not send commands

  #2 opened 4 years ago by tekcreations
  6