##OpenIPC Install##
Support Wyze and Xiaomi Fang Cams
##Installation Instructions:##
-
Download and install Etcher or Win32 Disk Imager
-
Write the openipc_firmware-v0.2.2.img to your SDcard
-
Open the SDCard and edit the files .wifissid and .wifipasswd to match your network
-
Flash the firmware to the camera:
Hold down the setup button for 10 seconds BEFORE connecting power With button still depressed, plug in power to the camera and continue to hold for another 10 -12 seconds and wait until the connection light blinks continually. Press setup button and you should hear a Chinese voice prompt if successful.
-
Reboot camera and reinsert SDcard after boot
-
Run openipscan.sh and find the IP address of your new OpenIP Camera.
-
Proceed to the status web page and apply the hacks. http://ipaddresshere/cgi-bin/status
Congratulations! Welcome to OpenIPC.
RTSP: rtsp://ipaddress/unicast
SSH: root/ismart12
Thanks to samtap for fanghacks used as the base for OpenIPC. Thanks to joeand37 for inspiration. Thanks to the various other developers on the fanghacks page who cross-compiled some of the binaries.