Table of Contents
- Introduction
- Onboarding as a DOME Service Provider with did:web
- What will I accomplish following this section?
- Pre-requisites
- Install and configure Keycloack as a Verifiable Credential Issuer
- Configure the Credential type and the Claims in the Issuer
- Issue and receive the Verifiable Credential in your Wallet
- Login to the DOME BAE Marketplace instance
- Create a Product Offering in the DOME BAE Marketplace instance
- Logoff from the DOME BAE Marketplace instance
- Distributed components
- Authentication
- Integration API (TMForum)
- Policies
- Example content (to be removed later)
(to be removed later)
NOTE: We want future Participants to integrate successfully and efficiently, therefore we provide a clear, structured, step-by-step Integration Guide that is comprehensive, self-contained, self-explanatory and actionable. This Integration Guide should:
- be the single point of entry for any stakeholder that wants to execute on integrating and federating a marketplace in DOME
- be the reference for what is currently available to integrators and with what level of stability vs. expected change
- not assume knowledge of DOME implementation details from the part of the reader
- be comprehensive so as to allow an executing IT/eng team to work autonomously
- provide detailed, self-contained, actionable instructions
- include context when appropriate to facilitate the comprehension of the Why, the What, the How and the with Whom at each step.
This guide provides detailed, self-contained and actionable technical instructions for integrating and federating a marketplace in DOME.
It is meant to be the reference for what is currently technically available and ready to be used. When additional functionality, components and/or
instruction get available, this guide will be adapted accordingly.
This guide limits on the technical details and therefore is not providing any details about contractual and business aspects of the marketplace integration and federation.
This guide aims for future participants willing to technically integrate and federate a marketplace in DOME. Descriptions and instructions are given as a comprehensive, step-by-step guide in such detail, so that IT and engineering teams can successfully and efficiently perform the necessary steps without profound knowledge of the DOME implementation details.
Nevertheless, this guide focusses on the actual integration of a marketplace in DOME, providing only the information needed to perform the actual setup for integration and federation. More details and in-depth knowledge about DOME and its involved components can be found in the linked resources.
The suggested deployment target infrastructure is Kubernetes. Therefore a sufficient
knowledge of Kubernetes and Helm is expected when following this guide. Knowledge about
ArgoCD is also helpful when using it as GitOps
continuous delivery tool.
This guide requires access to a domain and it's DNS settings, as well as configuring proper certificates.
Therefore also knowledge about cert-manager
and external-dns is recommended.
Authentication requires usage of decentralized identifiers and verifiable credentials, which requires an
appropriate configuration of the related components. Therefore, the reader of this guide should be
familiar with DIDs and VC/VP standards.
Cloud computing is identified as a central piece of Europe’s digital future, giving European businesses and public organisations the data processing technology required to support their digital transformation. The European Commission thereby stepped up its efforts to support cloud uptake in Europe as part of its strategy, notably with the pledge to facilitate "the set-up of a cloud services marketplace for EU users from the private and public sector". DOME is materialising the envisioned online marketplace, providing the means for accessing trusted services, notably cloud and edge services, building blocks deployed under the Common Services Platform and more generally any software and data processing services developed under EU programmes such as the Digital Europe Programme, Horizon 2020 or Horizon Europe.
Relying on Gaia-X concepts and open standards, DOME is providing the finishing touch to the technical building that the Digital Europe Program is creating for boosting the development and adoption of trusted Cloud and Edge services in Europe. It will provide the single point for enabling customers and service providers to meet each other in a trustful manner. DOME is taking the form of a federated collection of marketplaces connected to a shared digital catalogue of cloud and edge services. Each of the federated marketplaces will be independent or connected to the offering of a given cloud/edge infrastructure service provider which, in turn, can be classified as cloud IaaS providers or cloud platform service providers (each of which provide a platform targeted to solve the integration of vertical data/application services from a given vertical domain, like smart cities or smart farming, or the integration of certain type of data/application services, e.g., AI services). DOME is relying on the adoption of common open standards for the description and the management of the lifecycle of cloud and edge service products and offerings around those products, as well as their access or match-making services through a shared catalogue.
After following this guide, you will have a complete and functioning integration of a marketplace in a federated DOME environment.
The following sections provide details about the necessary steps:
- Onboarding: How to perform onboarding as DOME participant (Note, that this topic is currently under discussion and details will be added later).
- Distributed components: How to configure, deploy and operate the different required components. This involves the access node and components required for the IAM.
- Authentication: How to authenticate at services and how to implement the authentication.
- Integration API: How to integrate with the TMForum APIs, especially when using an own marketplace implementation instead of the BAE. Some samples and tutorials are given for core federation scenarios.
- Policies: How access policies are defined, created and enforced (Note, that this topic is currently under discussion and details will be added later).
There are some prerequisites that need to be fulfilled before following this guide:
- Domain: You need control over an own domain and have access to the DNS settings.
- Public access: Certain components need to be publicly accessible under your own domain. Therefore, a suitable infrastructure (like a cloud-hosted Kubernetes cluster) is required for running the components.
Additional prerequisites are provided in the different sections.
We describe here the onboarding process using Verifiable Credentials with the did:web DID method. In production (June 2024) the process will use did:elsi and eIDAS certificates, but this process will be finished in the coming weeks, so for the moment the users will be able to test onboarding and creation of Product Offerings and replication to other marketplaces, even if the actions do not have yet the legal coverage that did:elsi provides.
The user will be able to login with her Wallet in the DOME BAE Marketplace instance (the one operated at this moment by the DOME project) as a Service Provider with a unique identity determined by the domain (e.g., www.in2.es) used when generating the Verifiable Credential used to login to the BAE Marketplace.
Once logged-in, the user will be able to test the creation of a Product Offering using the screens of the DOME BAE Marketplace instance, and publish the Product Offering in the marketplace. The Product Offering will be replicated to all other federated marketplaces connected to the main DOME Marketplace instance.
All Product Offerings and related entities created under this identity will be separated from the other entities created by other identities.
This scenario uses the did:web DID Method, so you need control over a domain and have access to the DNS settings.
Before continuing, you have to create your DID, following the instructions in the section Create (Register) of the did:web specification.
You need to be able to issue a Verifiable Credential to a Wallet, using the DOME format and with the did:web method. There are different possibilities, but the easiest one which ensures compatibility with the current status of the OID4SSI implementation in DOME is to use the Wallet and Issuer provided by DOME.
Wallet: in order to use the Wallet provided by DOME, you do not have to install anything. Just visit with your mobile the URL: https://demo-wallet.fiware.dev/
Issuer: the Issuer is a little bit more involved. Before June, DOME will provide an Issuer acting As-a-Service (for those willing to use it), but for the moment you have to install and operate an instance the Issuer yourself.
The instructions to install and configure the Issuer (which is based on Keycloack) are here: Keycloack VC-Issuer. For a simple installation, the repo includes a containerised deployment so you only have to configure the Issuer with your specific information.
The Wallet should be able to access the relevant endpoints exposed by the Issuer, as described in the instrucions mentioned above.
Follow the instructions in Configure claims for Credential-Types to configure your Issuer for issuance of the Credential required for DOME.
Follow the instructions in section Demo to make Keycloack issue a QR code that can be scanned by your Wallet (remember that your Wallet is at https://demo-wallet.fiware.dev/).
Once you scan the QR code and complete the issuance process, you will have in your Wallet the required credentials to login in the DOME BAE Marketplace.
At this moment, you have in your mobile the credentials required to login to the DOME BAE Marketplace instance with a unique identity associated to your unique domain. Even though this credential does not have the level of legal certainty required for production use, it will allow you to test the features that the DOME BAE Marketplace instance provides to Service Providers.
TODO: add instructions to login to the DOME BAR Marketplace instance.
Once logged in, you are logged as a Service Provider with a unique identity associated to your unique domain. You can start creating Product Offerings and publishing them. The action of publishing the Product Offernings will make them visible to potential customers in the DOME BAE Marketplace instance and all other federated marketplaces which are connected to the DOME main instance.
TODO: add instructions to create and publish Product Offerings.
Once you have finished interacting with the DOME BAE Marketplace instance, you can logoff from it. In case of inactivity, the BAE Marketplace will log you off automatically.
Using your Wallet, you can login at any moment and continue working with the DOME BAE Marketplace. The Wallet has your credentials stored in your device and you can use them at any moment.
Components that need to be operated by a federated participant.
The DOME Access-Node is a set of services, that can be used to access the DOME Marketplace. A registered participant can use it to act as a federated marketplace in DOME.
The Access-Nodes consists of 3 logical building blocks:
The TM-Forum-API Service is a service providing a growing subset of the TMForum API's while using an NGSI-LD context broker as persistence backend and change notificator.
graph TD
;
TM-Forum-API --> Context-Broker;
Context-Broker --> Persistence;
TODO: Add description of blockchain connector
The TM-Forum-API service is a cluster of individual services providing one specific API each, enabling the participant to only run the necessary subset for its use-case. Apart from offering CRUD operations on the managed entities, the service also enables the subscription to notifications based on given queries.
The services are stateless and support horizontal scaling, but require an external cache to avoid having inconsistent caches. Inconsistent caches can result from either changes due to calls to the API, or due to notifications for changes reported by the underlying persistence. If run in a single instance mode, a local cache is acceptable but for larger setups a Redis installation is recommended.
For reasons of convenience, the TM-Forum-API service can be deploying with an Envoy API proxy which provides the individual APIs via a single service, routed based on the path. Another convenient feature is a RapiDoc container, that can be deployed with the TM-Forum-API service that provides a Openapi based API documentation for the deployed services, with the functionality of querying the API too.
The requirement for the persistence is to be compliant to the NGSI-LD API v1.6 enabling the use of different available context brokers. The currently recommended Context-Broker for the access node is Scorpio, mainly due to good cloud integration and overall support. The Scorpio context-broker allows a variety of adjustments to cover the operator's specific needs ( e.g. horizontal scaling utilizing Kafka) and uses Postgresql as it's persistence layer. The Postgresql is extended with Postgis for supporting geospatial data.
The base memory consumption per deployed pod is listed below but is will increase with the amount of traffic, therefor should only be used as a rough estimate.
| Service | Memory (Mi) |
|---|---|
| TM-Forum-API Pod | 250 |
| Scorpio | 400 |
| Postgresql/Postgis | 150 |
| Redis | 10 |
Apart from the database service, no other service will maintain a own persistence, therefor only for this service a persistent volume claim has to be dimensioned.
The recommended and endorsed way of deployment is via the provided helm charts ( optionally wrapped in ArgoCD Applications).
To deploy a setup, the umbrella chart of the access-node can be used as followed:
-
create a configuration values file according to the own environment, as described here.
-
add helm chart repository to helm installation
helm repo add dome-access-node https://dome-marketplace.github.io/access-node helm repo update💡 All releases of the Access-Node reside in the helm-repository https://dome-marketplace.github.io/access-node. In addition to that, all Pre-Release versions(build from the Pull Requests) are provided in the pre-repo https://dome-marketplace.github.io/access-node/pre. The pre-repo will be cleaned-up from time to time, in order to keep the index manageable.
-
install the components using the prepared configuration
helm install <RELEASE_NAME> dome-access-node/access-node --namespace <NAME_SPACE> --version <CHART_VERSION> -f values.yaml
The chart is released with a set of default values which act as a good starting point for an adoption. These values are also documented, enhancing the understanding. Additionally, the respective charts of the components should be consulted.
TODO: Replace with charts in once they are used.
To have a starting point, the this minimal config reduces the configuration to items that are likely changed by integrators. TODO: include config for the blockchain components
All components are configured with health and readiness checks to validate their own status, therefor being the base for a validation. These checks are utilized in the kubernetes checks as defined in the helm charts. TODO: Include RapiDoc Container for validation and add explanation here
- Management/admin APIs.
- Instrumentation, metrics, logs, alerts
The underlying database service holds the persisted data and therefor requires a backup&recovery mechanism when operated in a production environment. The use of managed database is strongly encouraged for safety and convenience.
The TM-Forum-API service used a json based log output by default, which can be parsed easily by log aggregators but can also be replaced if needed. The verbosity is controlled via environment variables and can be fine tuned to the operators needs.
TODO: Prometheus Metrics TODO: Grafana Dashboard
Upgrade to both a different chart version and new configuration can be accomplished with the following command
helm upgrade <RELEASE_NAME> dome-access-node/access-node --namespace <NAME_SPACE> --version <CHART_VERSION> -f values.yaml
Versioning of the main access-node helm chart is handled based on the labels used in the pull requests used to introduce changes and is enforced in the build pipeline. The requester and reviewers must set the label according to the SemVer 2.0.0 versioning scheme.
Versioning of the components and sub-charts is recommended to use the same scheme.
Versioning, release notes, stability considerations
To be filled once feedback from integrators comes in
When encountering timeouts in calls to the TM-Forum-API service it is possible to mitigate the imminent issue by increasing the timeout of the client (called "ngsi") calling the NGSI-LD broker. The necessary client and server configuration can be handed in via additional environment variables.
The DOME IAM-Framework is a set of microservices, that enables users in the DOME ecosystem to authenticate into the DOME Marketplace. The authentication process itself is described further below in the Authentication section.
The DOME IAM-Framework consists of multiple open-source components. The components are not required to be used, as long as alternatives providing the same interfaces are used.
The IAM-Framework consists of following components:
- The Trusted Issuers List service provides an EBSI Trusted Issuers Registry implementation to act as the Trusted-List-Service in the DSBA Trust and IAM Framework. In addition, a Trusted-Issuers-List API is provided to manage the issuers.
- VCVerifier provides the necessary endpoints to offer SIOP-2/OIDC4VP compliant authentication flows. It exchanges VerifiableCredentials for JWT, that can be used for authorization and authentication in down-stream components.
- Credentials Config Service manages and provides information about services and the credentials they are using. It returns the scope to be requested from the wallet per service. Furthermore, it specifies the credentials required and the issuers list endpoints to validate against, when checking access for a certain service.
- The Keycloak-VC-Issuer is plugin for Keycloak to support SIOP-2/OIDC4VP clients and issue VerifiableCredentials through the OIDC4VCI-Protocol to compliant wallets.
- PDP is an implementation of a Policy-Decision Point, evaluating Json-Web-Tokens containing VerifiableCredentials in a DSBA-compliant way. It also supports the evaluation in the context of i4Trust.
- Keyrock is the FIWARE component responsible for Identity Management. Within DOME IAM-Framework, currently Keyrock is being used as the iSHARE-compliant Authorization Registry (see for details: https://dev.ishare.eu/delegation/endpoint.html), where attribute-based access policies are stored and used during the authorization process. Note, that this will be replaced by an ODRL-compliant policy registry. A description of the policies is given in the policies section.
- Kong Plugins allow to extend the API Gateway Kong by further functionalities. Kong Gateway is a lightweight, fast, and flexible cloud-native API gateway. One of the plugins is the PEP plugin, which is especially required within the IAM-components as PEP component and interacts with the PDP mentioned above.
- Waltid manages Keys, DIDs and VCs. It is used by VC Issuer and VCVerifier.
The recommended way of deployment is via the provided Helm charts.
To deploy a setup, the umbrella chart of the iam-components can be used as followed:
-
create a configuration values file according to the own environment, as described here.
-
add helm chart repository to helm installation
helm repo add dome-iam https://dome-marketplace.github.io/iam-components helm repo update💡 All releases of the IAM-components reside in the helm-repository https://dome-marketplace.github.io/iam-components. In addition to that, all Pre-Release versions(build from the Pull Requests) are provided in the pre-repo https://dome-marketplace.github.io/iam-components/pre. The pre-repo will be cleaned-up from time to time, in order to keep the index manageable.
-
install the components using the prepared configuration
helm install <RELEASE_NAME> dome-iam/iam-components --namespace <NAME_SPACE> --version <CHART_VERSION> -f values.yaml
The chart is released with a set of documented default values. The parameters listed below are important to set and should be updated at least:
rbacandserviceAccount: Depending on your requirements, you might need to adapt settings for RBAC and service accountdids of participants: Replace/add the DIDs of the issuer and other participants- In the case of did:key provide correct key in keyfile.json for your issuer
keycloak.frontendUrl: Externally accessible address of the keycloak (should be the same as defined in ingress/route)keycloak.realm: Adapt clients, users and roles according to your needs<tir.com>: replace everywhere with actual TIR URL<dome-marketplace.org>: replace with your own domainkeyrock.initData.scriptData: Adapt the roles as in keycloak realmkong.configMap: Adapt the kong services and their routes
However, it is suggested to consult the respective charts listed below and check their documentation and configuration.
All components are configured with health and readiness checks to validate their own status, therefore being the base for a validation. These checks are utilized in the Kubernetes checks as defined in the helm charts.
The underlying database service holds the persisted data and therefore requires a backup&recovery mechanism when operated in a production environment. The use of managed database is strongly encouraged for safety and convenience.
Upgrade to both a different chart version and new configuration can be accomplished with the following command
helm upgrade <RELEASE_NAME> dome-iam/iam-components --namespace <NAME_SPACE> --version <CHART_VERSION> -f values.yaml
Versioning of the main iam-components helm chart is handled based on the labels used in the pull requests used to introduce changes and is enforced in the build pipeline. The requester and reviewers must set the label according to the SemVer 2.0.0 versioning scheme.
Versioning of the components and sub-charts is recommended to use the same scheme.
To be filled once feedback from integrators comes in
One might also link or integrate this guide: https://dome-marketplace.github.io/iam-guide/
using wallets, OIDC4VC&VP. verification etc.
Samples & tutorials for implementing core federation scenarios using the TMForum APIs (with focus on semantics and workflow, beyond the API reference)
Some content also required for the Knowledgebase, which should be added here as well:
- How to: autenticate the marketplace on the shared data layer
- How to: retrieve DOME ecosystem notifications
- How to: retrieve a list of products from the shared catalog
- How to: retrieve the product description from the shared catalog
- How to: retrieve the product price model from the shared catalog
- How to: push a product on the shared catalog
- How to: retrieve an order from other marketplaces
- How to: push a provisioning status on the shared data layer
- How to: push metering information on the shared data layer
- How to: push billing information on the shared data layer
- How to: retrieve billing information on the shared data layer
- How can a Service Provider create policies that concern the Products that they offer ?
- How can a Marketplace Operator create policites that concern the Products that they host ?
That only the federated marketplace needs to enforce locally.
That everyone in the federation needs to enforce.
i.e. marketplace -to- Access Node PEP, PDP - when are they needed and when not ?
i.e. Access Node -to- Access Node
Some content
Some table:
| Title 1 | Title 2 | Title 3 |
|---|---|---|
| abc | def | ghi |
| 123 | 456 | 789 |
| jkl | mno | pqr |
Some more content in a list
- Entry 1
- Entry 2
- Entry 3
Some mermaid diagram
graph TD;
A-->B;
A-->C;
B-->D;
C-->D;