DOSBox Pure is a fork of DOSBox, an emulator for DOS games, built for RetroArch/Libretro aiming for simplicity and ease of use.
- Download
- Install
- Features
- Load games from ZIP
- Store modifications in separate save files
- Mount disk images from inside ZIP files
- Start menu with auto start
- Automated controller mappings
- Mouse emulation
- Keyboard emulation
- Joystick emulation
- On-screen keyboard
- MIDI playback with SoundFonts
- Cheats support
- Save states
- Rewind support
- Loading M3U8 files
- Tips
- Features not yet implemented
- Unsupported features
- Building
- License
You can find a binary download for Windows, Linux and Raspberry Pi (Arm7) under the Releases page.
Locate the directory where your libretro frontend stores its cores.
In RetroArch, you can open the main menu and go to Configuration File
-> Load Configuration
-> Parent Directory
-> cores
to find it.
The release ZIP contains 2 files, dosbox_pure_libretro.dll
(or .so
for Linux) and dosbox_pure_libretro.info
.
The .dll
or .so
file is to be extracted into the cores directory. The .info
file goes into the info
directory or into cores
if it doesn't exist.
DOSBox Pure can load games directly from ZIP files without the need to extract them.
Changes made to a loaded ZIP file will be stored as a separate ZIP file into the libretro saves directory.
If a game is loaded directly without using a ZIP file the saves directory is not used.
CD images (ISO or CUE) and floppy disk images (IMG/IMA/VHD) can be mounted directly from inside ZIP files.
The system will automatically mount the first found disk image as the A: or D: drive.
Additional disks can be loaded or swapped by using the Disc Control
menu in RetroArch.
The start menu also offers the option to mount or unmount an image.
This is the first screen that appears when loading a game. It offers a gamepad controllable list
of all executable files for the loaded game. By pressing right an item can be selected as the default
which will skip the menu on the next launch.
By pressing right multiple times, a number of frames can be specified that will automatically be skipped
on start. This can be used to skip over loading screens or start-up sequences.
If there is only a single executable, the menu will not show and directly run the file.
To force the menu to be shown, hold shift on the keyboard or L2 or R2 on
the gamepad while selecting Restart
in the core menu.
When a game is loaded, DOSBox Pure will try to detect the game and apply a controller mapping.
To see the applied mapping, check the Port 1 Controls
screen in the RetroArch menu.
It will show Detected Automatic Key Mapping: <GAMENAME>
. Additionally you can set the core option
Input > Advanced > Automatic Game Pad Mappings
to Enable with notification on game detection
.
Under the Controls
screen in the RetroArch menu there are 2 mouse emulation modes available by
switching the Device Type
setting of any port with left/right. There is Mouse with Left Analog Stick
and
Mouse with Right Analog Stick
.
When choosing left stick, the face buttons (B/A) will be used as left/right mouse buttons.
For the right stick the shoulder buttons L/R will be used as left/right mouse buttons.
The X button is the middle mouse button and L2/R2 can be used to speed up or slow down mouse movement.
There is also the core option Input > Mouse Sensitivity
to increase/decrease mouse movement speed.
For games that don't have automated controller mappings or are not detected successfully,
by default the option Input > Bind Unused Buttons
will assign all unused buttons on the game pad with
some default key.
If the Device Type
under the Controls
screen in the RetroArch menu of any port is set to
Generic Keyboard Bindings
all buttons will be assigned with a keyboard key.
Additionally it can be set to Custom Keyboard Bindings
which will allow fully customizable mappings.
There are multiple DOS era joysticks available as mappings under the Controls
screen in the RetroArch menu.
Gravis GamePad (1 D-Pad, 4 Buttons)
, Basic joystick (2 Axes, 2 Buttons)
,
ThrustMaster Flight Stick (3 axes, 4 buttons, 1 hat)
and Control both DOS joysticks (4 axes, 4 buttons)
.
These can be assigned to any port and the button layout can be remapped as with any other device type.
By pressing L3 on the gamepad (usually by pushing in the left analog stick) the on-screen keyboard will open.
The cursor can be controlled with the controller (or mouse or keyboard) and L2/R2 will speed up or slow down
the move speed.
If the cursor is moved above the middle of the screen the keyboard will move to the top.
The button can be remapped in the controls menu and there is also a core options to disable it entirely.
If DOSBox Pure finds one or more .SF2
sound font file in the system
directory of the frontend, one of them
can be selected via the Audio > MIDI SoundFont
core option.
This sound font will then be used to play General Midi and Sound Canvas music.
DOSBox Pure exposes its memory for cheats in the libretro frontend.
For details how to use it and how to find new cheats while playing the game,
check the documentation on the RetroArch website.
This can also be used to add controller rumble support to DOS games.
The DOSBox Pure core fully supports libretro save states.
Make sure to test it in each game before using it. Complex late era DOS games might have problems.
Be aware that states saved with different video or cpu settings are not loadable.
Save states might not be compatible across different versions of DOSBox Pure.
Using the core option Save States Support
, rewinding can be enabled.
Keep in mind that rewind support comes at a high performance cost.
If the core gets loaded with a .m3u8
file, all files listed in it will be added to the
disc swap menu. The first image will automatically get mounted as A: or D: drive depending
if it is a CD or floppy disk image.
To play not with a gamepad but with keyboard and mouse, be sure to use the 'Game Focus' mode available in RetroArch. By default you can toggle game focus by pressing the scroll lock key. While game focus is active, the hotkeys are disabled and keyboard will not cause retro pad button presses (which could cause multiple keys to be pressed at once).
If your libretro frontend wants to load the content of .ZIP
files instead of sending it to
DOSBox Pure to load, the files can be renamed from .ZIP
to .DOSZ
.
This is especially useful for CD images in ZIP format which RetroArch refuses to append through its
Disc Control
menu. Using an M3U8 file also avoids this problem.
If you have assigned an auto start item in the start menu but want to go back to it,
hold shift on the keyboard or L2 or R2 on the gamepad while selecting Restart
in the core menu.
If you have a ZIP file you want to load as a fake floppy disk or fake CD-ROM, there are multiple options.
The easiest is to rename the file from .ZIP
to .D.ZIP
(to use the D: drive).
You can also edit the RetroArch .LPL
playlist file to add a #D
after the file like game.zip#D
.
A third option is available inside DOSBox Pure with a new remount command that can be called with
REMOUNT C: D:
to remount the C: drive to D:. This can for example be used in a startup batch file.
DOSBox Pure by default uses the first word of the ZIP file as the label of the mounted disk.
Some games require a specific label on a floppy or a CD-ROM so DOSBox Pure offers a new command
to change the label of a mounted disk. For example, LABEL C: HELLO
changes the label of the C: drive.
This label is not saved anywhere and needs to be reapplied on every launch so it's best to add the
command in a startup batch file.
You can run the MOUNT
command to check all mounted disks and their disk label.
The keyboard layout defaults to the US Layout (QWERTY).
If you need a different layout, you can change the core option Input > Advanced > Keyboard Layout
.
It would be nice to be able to load a dosbox.conf
file if it exists in the loaded
game directory (for example inside the ZIP file). Ideally this would then hide all the options that
have been overwritten by that .conf
file in the core options list.
When a DOS games opens a large file and wants to read some data from near the end of the file,
DOSBox Pure needs to decompress the entire file to do that. This can be most noticeable when mounting
CD-ROM images from inside ZIP files.
Afterwards there is an index buffer which will be used to decompress random locations of the file
and file access will be much faster.
This index buffer should be stored into the game save file to avoid having to slowly rebuild it
every time the same game is launched.
For now, serial port and IPX emulation from base DOSBox have been removed.
DOSBox Pure has no dependency requirements besides a C++ compiler and the standard library.
Open dosbox_pure_libretro.sln
in Visual Studio (all versions from 2012 and up are supported) and press
build to build the dosbox_pure_libretro.dll
core file.
To build under linux, make sure GCC 9 (package g++-9) and GNU Make (package make) are installed.
Change into the project directory then run make -j4
to build it.
The makefile explicitly is set to use g++-9 because there are codegen bugs in GCC 10.2 that affect
any version of DOSBox on certain platforms.
You can edit the simple Makefile to set a different compiler or add hardware specific compiler flags.
DOSBox Pure, as well as original DOSBox, is available under the GNU General Public License, version 2.