MagicMirror Module: DublinRTPI
MMM-DublinRTPI (Real-Time Passenger Information) is a module for the MagicMirror. It displays real-time arrival times for Dublin Bus, IrishRail and LUAS stops. The data is sourced via the Dublinked RTPI API.
This module is based on the default Calendar module, allowing it to display and be configured in a similar way.
Usage
Installation
1. Clone this module into your MagicMirror's modules directory
MagicMirror$ cd modules
modules$ git clone https://github.com/galaktor/MMM-DublinRTPI2. Install this module's dependencies
modules$ cd MMM-DublinRTPI
MMM-DublinRTPI$ npm install3. Add this module to your MM config's modules array
MMM-DublinRTPI$ cd ../..
MagicMirror$ nano config/config.jsConfigure as described below and restart your MagicMirror.
A typical configuration example
/* MagicMirror/config/config.js */
{
/* ...your other config here */
modules: [
/* ...your other modules here */
{ module: "MMM-DublinRTPI",
position: "top_left",
header: "Bus & Rail",
config: { colored: true,
stops: [{ id: "270", label: "O'Connell", color: "yellow", directions: ["in"], routes: ["40"] },
{ id: "PERSE", label: "Pearse", color: "green", directions: ["north"] },
{ id: "LUAS6", label: "Red Cow", color: "tomato", directions: ["south"] }]
}
}
]
}The full configuration explained
/* MagicMirror/config/config.js */
{
modules: [
{
module: "MMM-DublinRTPI",
/* the usual MM module settings */
position: "top_left"
header: "Bus & Rail",
/* configure this module */
config: {
/* the bus stops to show events for.
* this is the most important part of the configuration.
* TYPE: array of objects
* REQUIRED: no (but it won't be very useful if left empty)
* DEFAULT: [] (empty) */
stops: [
{
/* ID of the bus, luas or rail stop to show events for.
* see below for details on finding the right stop IDs.
* TYPE: string
* REQUIRED: yes */
id: "123",
/* a friendly name to display instead of the stop ID.
* because the stop ID often isn't very meaningful.
* TYPE: string
* REQUIRED: no
* DEFAULT: the stop ID */
label: "O'Connell St",
/* select which routes to show events for at this stop.
* routes which don't match any of these strings EXACTLY
* will not be displayed. letters are not case-sensitive.
* if left empty, will show all routes at the stop.
* TYPE: array of strings
* REQUIRED: no
* DEFAULT: [] (empty) */
routes: ["123", "123x"],
/* select which directions to show events for at this stop.
* directions which don't CONTAIN any of these strings
* will not be displayed. letters are not case-sensitive.
* the value you can use here depends on the service.
* typically they are one of:
* - "northbound" or "southbound" for luas and rail
* - "inbound" or "outbound" for bus
* if left empty, will show all directions at the stop.
* NOTE: "out" is contained in "southbound" as well as "outbound".
* TYPE: array of strings
* REQUIRED: no
* DEFAULT: [] (empty) */
directions: ["northbound", "inbound"],
/* select which destinations to show events for at this stop.
* destinations which don't CONTAIN any of these strings
* will not be displayed. letters are not case-sensitive.
* the value you can use here depends on the route.
* if left empty, will show all directions at the stop.
* NOTE: "Connolly" is contained in "Dublin Connolly" as well as "LUAS Connolly".
* TYPE: array of strings
* REQUIRED: no
* DEFAULT: [] (empty) */
destinations: ["UCD", "Connolly"],
/* the FontAwesome symbol to use for events at this stop.
* TYPE: string (see https://fontawesome.com/icons)
* REQUIRED: no
* DEFAULT: autodetect based on the stop ID
* - "bus" for Dublin Bus stops
* - "train" for Irish Rail stops
* - "subway" for Luas stops */
symbol: "beer",
/* the color to use for events at this stop.
* requires the module option 'colored' to be 'true'
* TYPE: string (CSS values, see https://www.w3schools.com/colors/colors_names.asp)
* REQUIRED: no
* DEFAULT: magic mirror default text color */
color: "pink",
/* maximum number of events to display for this stop.
* TYPE: uint
* REQUIRED: no
* DEFAULT: value of module config */
maximumEntries: 123,
/* hide events with a duetime greater than this.
* TYPE: uint (minutes)
* REQUIRED: no
* DEFAULT: value of module config */
maximumNumberOfMinutes: 60,
},
/* configure more stops if you wish to */
],
/* choose specific routes to be displayed for stops which
* don't have routes explicitly defined. per-stop config
* takes preference. see stop config above for more details.
* TYPE: array of strings
* REQUIRED: no
* DEFAULT: [] (empty) */
routes: ["123", "123x"],
/* choose specific directions to be displayed for stops which
* don't have directions explicitly defined. per-stop config
* takes preference. see stop config above for more details.
* TYPE: array of strings
* REQUIRED: no
* DEFAULT: [] (empty) */
directions: ["northbound", "inbound"],
/* choose specific directions to be displayed for stops which
* don't have directions explicitly defined. per-stop config
* takes preference. see stop config above for more details.
* TYPE: array of strings
* REQUIRED: no
* DEFAULT: [] (empty) */
destinations: ["UCD", "Connolly"],
/* maximum number of events to display IN TOTAL.
* TYPE: uint
* REQUIRED: no
* DEFAULT: 10 */
maximumEntries: 10,
/* hide events with a duetime later than this.
* TYPE: uint (minutes)
* REQUIRED: no
* DEFAULT: 60 */
maximumNumberOfMinutes: 60,
/* display a symbol for each event.
* TYPE: boolean
* REQUIRED: no
* DEFAULT: true */
displaySymbol: true,
/* display the bus stop name.
* TYPE: boolean
* REQUIRED: no
* DEFAULT: true */
displayStopName: true,
/* display the bus route.
* TYPE: boolean
* REQUIRED: no
* DEFAULT: true */
displayRoute: true,
/* display the destination of each event.
* TYPE: boolean
* REQUIRED: no
* DEFAULT: true */
displayDestination: true,
/* how long to wait before fetching new data.
* TYPE: uint (milliseconds)
* REQUIRED: no
* DEFAULT: 60000 (1 minute) */
fetchInterval: 60000,
/* the time an update animation takes.
* TYPE: uint (milliseconds)
* REQUIRED: no
* DEFAULT: 2000 (2 seconds) */
animationSpeed: 1000,
/* gradually fade out events towards the bottom.
* TYPE: boolean
* REQUIRED: no
* DEFAULT: true */
fade: true,
/* when to begin fading out events in the list.
* value between 0 and 1, where 0 is the top and
* 1 is the bottom of the list.
* TYPE: float (0-1)
* REQUIRED: no
* DEFAULT: 0.25 */
fadePoint: 0.25,
/* use colors to display the events.
* colors are individually set on the stops.
* TYPE: boolean
* REQUIRED: no
* DEFAULT: false */
colored: false,
/* broadcast all the events to all other modules.
* notification: `DUBLINBUS_EVENTS`
* TYPE: boolean
* REQUIRED: no
* DEFAULT: true */
broadcastEvents: true,
}
}
]
}Valid RTPI values
The values for id, direction, destination, and route depend on the service and stop you want to use. You will need to determine the right values by querying the RTPI database.
Finding your stop ID
A full list of stops is available via the RTPI API. One can use curl and jq to pull out stops, e.g.
stops with UCD in the name and which are served by route 67X
curl https://data.dublinked.ie/cgi-bin/rtpi/busstopinformation | \
jq '.results[] |
select(.fullname | contains("UCD")) |
select(.operators[].routes[]=="67X")'/* response */
{
"stopid": "4952", /* <-- */
"displaystopid": "4952",
"shortname": "UCD",
"shortnamelocalized": "UCD",
"fullname": "UCD",
"fullnamelocalized": "",
"latitude": "53.30494889",
"longitude": "-6.216826944",
"lastupdated": "11/12/2017 10:09:21",
"operators": [
{
"name": "bac",
"routes": [
"77X",
"84X",
"67X",
"66X",
"27X",
"32X"
]
}
]
}all stops for Luas green line
curl https://data.dublinked.ie/cgi-bin/rtpi/busstopinformation | \
jq '.results[] |
select(.operators[].name=="LUAS") |
select(.operators[].routes[]=="Green")'/* response */
{
"stopid": "LUAS24", /* <-- */
"displaystopid": "LUAS St. Stephen's Green",
"shortname": "",
"shortnamelocalized": "",
"fullname": "LUAS St. Stephen's Green",
"fullnamelocalized": "",
"latitude": "53.33907222",
"longitude": "-6.261333333",
"lastupdated": "08/01/2018 09:29:30",
"operators": [
{
"name": "LUAS",
"routes": [
"Green"
]
}
]
}
/* ...and many more */Bus Stop signs
Dublin Bus stop ids can also be found on the physical bus stop signs:
The ID on this sign refers to stop id 1605.
Customisation
You can customize this module in many ways.
- combine several stops into a single MM module
- group stops into separate MM modules by service, stop, direction, etc.
- assign stops different colors and symbols via the
symbolandcolorsettings - hide some or all parts of the displayed events via the
displaySymbol,displayStopName,displayRouteanddisplayDestinationsettings - further modify how the parts of an event are styles by editing the
dublinrtpi.cssfile directly
The naming used to describe the different parts of an event in the module are as follows:
Kudos
This module is Loosely based on the default Calendar module by Michael Teeuw. Shout-out to dr4ke616/MMM-Dublin-Bus, which showed me how to query the RTPI API.